Skip Headers

PL/SQL Packages and Types Reference
10g Release 1 (10.1)

Part Number B10802-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Feedback

Go to previous page
Previous
Go to next page
Next
View PDF

76
DBMS_RESOURCE_MANAGER

The DBMS_RESOURCE_MANAGER package maintains plans, consumer groups, and plan directives. It also provides semantics so that you may group together changes to the plan schema.

See Also:

For more information on using the Database Resource Manager, see Oracle Database Administrator's Guide.

This chapter contains the following topics:


Using DBMS_RESOURCE_MANAGER


Security Model

The invoker must have the ADMINISTER_RESOURCE_MANAGER system privilege to execute these procedures. The procedures to grant and revoke this privilege are in the package DBMS_RESOURCE_MANAGER_PRIVS.


Constants

Table 76-1 Constants - Names and Oracle Enterprise Manager Abbreviations
Constant Definition

client_machine

CONSTANT VARCHAR2(30) := 'CLIENT_MACHINE';

client_os_user

CONSTANT VARCHAR2(30) := 'CLIENT_OS_USER';

client_program

CONSTANT VARCHAR2(30) := 'CLIENT_PROGRAM';

module_name

CONSTANT VARCHAR2(30) := 'MODULE_NAME';

module_name_action

CONSTANT VARCHAR2(30) := 'MODULE_NAME_ACTION';

oracle_user

CONSTANT VARCHAR2(30) := 'ORACLE_USER'

service_module

CONSTANT VARCHAR2(30) := 'SERVICE_MODULE';

service_module_action

CONSTANT VARCHAR2(30) := 'SERVICE_MODULE_ACTION';

service_name

CONSTANT VARCHAR2(30) := 'SERVICE_NAME';


Examples

One of the advantages of plans is that they can refer to each other. The entries in a plan can either be consumer groups or subplans. For example, the following is also a set of valid CPU plan directives:

Table 76-2 MYDB PLAN CPU Plan Directives
Subplan/Group CPU_Level 1

MAILDB Plan

30%

BUGDB Plan

70%

If these plan directives were in effect and there were an infinite number of runnable sessions in all consumer groups, then the MAILDB plan would be assigned 30% of the available CPU resources, while the BUGDB plan would be assigned 70% of the available CPU resources. Breaking this further down, sessions in the "Postman" consumer group would be run 12% (40% of 30%) of the time, while sessions in the "Online" consumer group would be run 56% (80% of 70%) of the time. Figure 76-1 diagram depicts this scenario:

Figure 76-1 Resource Manager Scenario

Text description of arpls007.gif follows

Text description of the illustration arpls007.gif

Conceptually the active sessions are underneath the consumer groups. In other words, a session belongs to a resource consumer group, and this consumer group is used by a plan to determine allocation of processing resources.

A multiplan (plan with one or more subplans) definition of CPU plan directives cannot be collapsed into a single plan with one set of plan directives, because each plan is its own entity. The CPU quanta that is allotted to a plan or subplan gets used only within that plan, unless that plan contains no consumer groups with active sessions. Therefore, in this example, if the Bug Maintenance Group did not use any of its quanta, then it would get recycled within that plan, thus going back to level 1 within the BUGDB PLAN. If the multiplan definition in the preceding example got collapsed into a single plan with multiple consumer groups, then there would be no way to explicitly recycle the Bug Maintenance Group's unused quanta. It would have to be recycled globally, thus giving the mail sessions an opportunity to use it.

The resources for a database can be partitioned at a high level among multiple applications and then repartitioned within an application. If a given group within an application does not need all the resources it is assigned, then the resource is only repartitioned within the same application.

The following example uses the default plan and consumer group allocation methods:

BEGIN
DBMS_RESOURCE_MANAGER.CREATE_PENDING_AREA();
DBMS_RESOURCE_MANAGER.CREATE_PLAN(PLAN => 'bugdb_plan', 
   COMMENT => 'Resource plan/method for bug users sessions');
DBMS_RESOURCE_MANAGER.CREATE_PLAN(PLAN => 'maildb_plan', 
   COMMENT => 'Resource plan/method for mail users sessions');
DBMS_RESOURCE_MANAGER.CREATE_PLAN(PLAN => 'mydb_plan', 
   COMMENT => 'Resource plan/method for bug and mail users sessions');
DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(CONSUMER_GROUP => 'Bug_Online_
group', 
   COMMENT => 'Resource consumer group/method for online bug users sessions');
DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(CONSUMER_GROUP => 'Bug_Batch_group', 
COMMENT => 'Resource consumer group/method for bug users sessions who run batch 
jobs');
DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(CONSUMER_GROUP => 'Bug_Maintenance_
group',
   COMMENT => 'Resource consumer group/method for users sessions who maintain 
   the bug  db');
DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(CONSUMER_GROUP => 'Mail_users_
group', 
   COMMENT => 'Resource consumer group/method for mail users sessions');
DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(CONSUMER_GROUP => 'Mail_Postman_
group',
   COMMENT => 'Resource consumer group/method for mail postman');
DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(CONSUMER_GROUP => 'Mail_Maintenance_
group', 
   COMMENT => 'Resource consumer group/method for users sessions who maintain 
the mail
   db');
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'bugdb_plan', GROUP_OR_
SUBPLAN => 'Bug_Online_group',
   COMMENT => 'online bug users sessions at level 1', CPU_P1 => 80, CPU_P2=> 0,
   PARALLEL_DEGREE_LIMIT_P1 => 8);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'bugdb_plan', GROUP_OR_
SUBPLAN => 'Bug_Batch_group', 
   COMMENT => 'batch bug users sessions at level 1', CPU_P1 => 20, CPU_P2 => 0,
   PARALLEL_DEGREE_LIMIT_P1 => 2);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'bugdb_plan', GROUP_OR_
SUBPLAN => 'Bug_Maintenance_group',
   COMMENT => 'bug maintenance users sessions at level 2', CPU_P1 => 0, CPU_P2 
=> 100, PARALLEL_DEGREE_LIMIT_P1 => 3);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'bugdb_plan', GROUP_OR_
SUBPLAN => 'OTHER_GROUPS', 
   COMMENT => 'all other users sessions at level 3', CPU_P1 => 0, CPU_P2 => 0, 
CPU_P3 => 100);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'maildb_plan', GROUP_OR_
SUBPLAN => 'Mail_Postman_group',
   COMMENT => 'mail postman at level 1', CPU_P1 => 40, CPU_P2 => 0,
   PARALLEL_DEGREE_LIMIT_P1 => 4);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'maildb_plan', GROUP_OR_
SUBPLAN => 'Mail_users_group',
   COMMENT => 'mail users sessions at level 2', CPU_P1 => 0, CPU_P2 => 80,
   PARALLEL_DEGREE_LIMIT_P1 => 4);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'maildb_plan', GROUP_OR_
SUBPLAN => 'Mail_Maintenance_group',
   COMMENT => 'mail maintenance users sessions at level 2', CPU_P1 => 0, CPU_P2 
=> 20,
   PARALLEL_DEGREE_LIMIT_P1 => 2);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'maildb_plan', GROUP_OR_
SUBPLAN => 'OTHER_GROUPS', 
   COMMENT => 'all other users sessions at level 3', CPU_P1 => 0, CPU_P2 => 0, 
CPU_P3 => 100);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'mydb_plan', GROUP_OR_
SUBPLAN => 'maildb_plan', 
   COMMENT=> 'all mail users sessions at level 1', CPU_P1 => 30);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'mydb_plan', GROUP_OR_
SUBPLAN => 'bugdb_plan', 
   COMMENT => 'all bug users sessions at level 1', CPU_P1 => 70);
DBMS_RESOURCE_MANAGER.VALIDATE_PENDING_AREA();
DBMS_RESOURCE_MANAGER.SUBMIT_PENDING_AREA();
END;

The preceding call to VALIDATE_PENDING_AREA is optional, because the 
validation is implicitly done in SUBMIT_PENDING_AREA.

BEGIN
DBMS_RESOURCE_MANAGER.CREATE_PENDING_AREA();

DBMS_RESOURCE_MANAGER.CREATE_PLAN(
 PLAN => 'bugdb_plan',
 COMMENT => 'Resource plan/method for bug users sessions');
DBMS_RESOURCE_MANAGER.CREATE_PLAN(
 PLAN => 'maildb_plan',
 COMMENT => 'Resource plan/method for mail users sessions');

DBMS_RESOURCE_MANAGER.CREATE_PLAN(
 PLAN => 'mydb_plan',
 COMMENT => 'Resource plan/method for bug and mail users sessions');

DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(
 CONSUMER_GROUP => 'Bug_Online_group',
 COMMENT => 'Resource consumer group/method for online bug users sessions');

DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(
 CONSUMER_GROUP => 'Bug_Batch_group',
 COMMENT => 'Resource consumer group/method for bug users sessions who run
batch jobs');
DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(
 CONSUMER_GROUP => 'Bug_Maintenance_group',
 COMMENT => 'Resource consumer group/method for users sessions who maintain
the bug db');
DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(
 CONSUMER_GROUP => 'Mail_users_group',
 COMMENT => 'Resource consumer group/method for mail users sessions');
DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(
 CONSUMER_GROUP => 'Mail_Postman_group',
 COMMENT => 'Resource consumer group/method for mail postman');
DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(
 CONSUMER_GROUP => 'Mail_Maintenance_group',
 COMMENT => 'Resource consumer group/method for users sessions who maintain
the mail
db');

DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(
 PLAN => 'bugdb_plan', GROUP_OR_SUBPLAN => 'Bug_Online_group',
 COMMENT => 'online bug users sessions at level 1',
 CPU_P1 => 80, CPU_P2=> 0,
 PARALLEL_DEGREE_LIMIT_P1 => 8);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(
 PLAN => 'bugdb_plan', GROUP_OR_SUBPLAN => 'Bug_Batch_group',
 COMMENT => 'batch bug users sessions at level 1',
 CPU_P1 => 20, CPU_P2 => 0,
 PARALLEL_DEGREE_LIMIT_P1 => 2);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(
 PLAN => 'bugdb_plan', GROUP_OR_SUBPLAN => 'Bug_Maintenance_group',
 COMMENT => 'bug maintenance users sessions at level 2',
 CPU_P1 => 0, CPU_P2 => 100,
 PARALLEL_DEGREE_LIMIT_P1 => 3);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(
 PLAN => 'bugdb_plan', GROUP_OR_SUBPLAN => 'OTHER_GROUPS',
 COMMENT => 'all other users sessions at level 3',
 CPU_P1 => 0, CPU_P2 => 0, CPU_P3 => 100);

DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(
 PLAN => 'maildb_plan', GROUP_OR_SUBPLAN => 'Mail_Postman_group',
 COMMENT => 'mail postman at level 1',
 CPU_P1 => 40, CPU_P2 => 0,
 PARALLEL_DEGREE_LIMIT_P1 => 4);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(
 PLAN => 'maildb_plan', GROUP_OR_SUBPLAN => 'Mail_users_group',
 COMMENT => 'mail users sessions at level 2',
 CPU_P1 => 0, CPU_P2 => 80,
 PARALLEL_DEGREE_LIMIT_P1 => 4);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(
 PLAN => 'maildb_plan', GROUP_OR_SUBPLAN => 'Mail_Maintenance_group',
 COMMENT => 'mail maintenance users sessions at level 2',
 CPU_P1 => 0, CPU_P2 => 20,
 PARALLEL_DEGREE_LIMIT_P1 => 2);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(
 PLAN => 'maildb_plan', GROUP_OR_SUBPLAN => 'OTHER_GROUPS',
 COMMENT => 'all other users sessions at level 3',
 CPU_P1 => 0, CPU_P2 => 0, CPU_P3 => 100);

DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(
 PLAN => 'mydb_plan', GROUP_OR_SUBPLAN => 'maildb_plan',
 COMMENT=> 'all mail users sessions at level 1',
 CPU_P1 => 30);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(
 PLAN => 'mydb_plan', GROUP_OR_SUBPLAN => 'bugdb_plan',
 COMMENT => 'all bug users sessions at level 1',
 CPU_P1 => 70);

DBMS_RESOURCE_MANAGER.VALIDATE_PENDING_AREA();
DBMS_RESOURCE_MANAGER.SUBMIT_PENDING_AREA();
END;
/

Summary of DBMS_RESOURCE_MANAGER Subprograms

Table 76-3  DBMS_RESOURCE_MANAGER Package Subprograms
Subprogram Description

CLEAR_PENDING_AREA Procedure

Clears the work area for the resource manager

CREATE_CONSUMER_GROUP Procedure

Creates entries which define resource consumer groups

CREATE_PENDING_AREA Procedure

Creates a work area for changes to resource manager objects

CREATE_PLAN Procedure

Creates entries which define resource plans

CREATE_PLAN_DIRECTIVE Procedure

Creates resource plan directives

CREATE_SIMPLE_PLAN Procedure

Creates a single-level resource plan containing up to eight consumer groups in one step

DELETE_CONSUMER_GROUP Procedure

Deletes entries which define resource consumer groups

DELETE_PLAN Procedure

Deletes the specified plan as well as all the plan directives it refers to

DELETE_PLAN_CASCADE Procedure

Deletes the specified plan as well as all its descendants (plan directives, subplans, consumer groups)

DELETE_PLAN_DIRECTIVE Procedure

Deletes resource plan directives

SET_CONSUMER_GROUP_MAPPING Procedure

Adds, deletes, or modifes pairs for the login and run-time attribute mappings

SET_CONSUMER_GROUP_MAPPING_PRI Procedure

Creates the session attribute mapping priority list

SET_INITIAL_CONSUMER_GROUP Procedure

Assigns the initial resource consumer group for a user

SUBMIT_PENDING_AREA Procedure

Submits pending changes for the resource manager

SWITCH_CONSUMER_GROUP_FOR_SESS Procedure

Changes the resource consumer group of a specific session

SWITCH_CONSUMER_GROUP_FOR_USER Procedure

Changes the resource consumer group for all sessions with a given user name

SWITCH_PLAN Procedure

Sets the current resource manager plan

UPDATE_CONSUMER_GROUP Procedure

Updates entries which define resource consumer groups

UPDATE_PLAN Procedure

Updates entries which define resource plans

UPDATE_PLAN_DIRECTIVE Procedure

Updates resource plan directives

VALIDATE_PENDING_AREA Procedure

Validates pending changes for the resource manage


CLEAR_PENDING_AREA Procedure

This procedure lets you clear pending changes for the resource manager.

Syntax

DBMS_RESOURCE_MANAGER.CLEAR_PENDING_AREA;

CREATE_CONSUMER_GROUP Procedure

This procedure lets you create entries which define resource consumer groups.

Syntax

DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP (
   consumer_group  IN VARCHAR2,
   comment         IN VARCHAR2, 
   cpu_mth         IN VARCHAR2 DEFAULT 'ROUND-ROBIN'); 

Parameters

Table 76-4  CREATE_CONSUMER_GROUP Procedure Parameters
Parameter Description

consumer_group

The name of the consumer group.

comment

The user's comment.

cpu_mth

The resource allocation method for distributing CPU among sessions in the consumer group. The default is ROUND-ROBIN, which uses a round-robin scheduler to ensure sessions are fairly executed. RUN-TO-COMPLETION specifies that sessions with the largest active time are scheduled ahead of other sessions


CREATE_PENDING_AREA Procedure

This procedure lets you make changes to resource manager objects.

All changes to the plan schema must be done within a pending area. The pending area can be thought of as a "scratch" area for plan schema changes. The administrator creates this pending area, makes changes as necessary, possibly validates these changes, and only when the submit is completed do these changes become active.

Syntax

DBMS_RESOURCE_MANAGER.CREATE_PENDING_AREA;

Usage Notes

You may, at any time while the pending area is active, view the current plan schema with your changes by selecting from the appropriate user views.

At any time, you may clear the pending area if you want to stop the current changes. You may also call the VALIDATE procedure to confirm whether the changes you has made are valid. You do not have to do your changes in a given order to maintain a consistent group of entries. These checks are also implicitly done when the pending area is submitted.


Note:

Oracle allows "orphan" consumer groups (in other words, consumer groups that have no plan directives that refer to them). This is in anticipation that an administrator may want to create a consumer group that is not currently being used, but will be used in the future.


The following rules must be adhered to, and they are checked whenever the validate or submit procedures are executed:

If any of the preceding rules are broken when checked by the VALIDATE or SUBMIT procedures, then an informative error message is returned. You may then make changes to fix the problem(s) and reissue the validate or submit procedures.


CREATE_PLAN Procedure

This procedure creates entries which define resource plans.

Syntax

DBMS_RESOURCE_MANAGER.CREATE_PLAN (
   plan                       IN VARCHAR2, 
   comment                    IN VARCHAR2, 
   cpu_mth                    IN VARCHAR2 DEFAULT 'EMPHASIS', 
   active_sess_pool_mth        IN VARCHAR2 DEFAULT 'ACTIVE_SESS_POOL_ABSOLUTE', 
   parallel_degree_limit_mth  IN VARCHAR2 DEFAULT 
                              'PARALLEL_DEGREE_LIMIT_ABSOLUTE',
   queueing_mth               IN VARCHAR2 DEFAULT 'FIFO_TIMEOUT',); 

Parameters

Table 76-5  CREATE_PLAN Procedure Parameters
Parameter Description

plan

The name of the resource plan.

comment

User's comment.

cpu_mth

The resource allocation method for specifying how much CPU each consumer group or sub plan gets. EMPHASIS, the default method, is for multilevel plans that use percentages to specify how CPU is distributed among consumer groups. RATIO is for single-level plans that use ratios to specify how CPU is distributed.

active_sess_pool_mth

The Active session pool resource allocation method. Limits the number of active sessions. All other sessions are inactive and wait in a queue to be activated. ACTIVE_SESS_POOL_ABSOLUTE is the default and only method available.

parallel_degree_limit_mth

The resource allocation method for specifying a limit on the degree of parallelism of any operation. PARALLEL_DEGREE_LIMIT_ABSOLUTE is the default and only method available.

queueing_mth

The Queuing resource allocation method. Controls order in which queued inactive sessions will execute. FIFO_TIMEOUT is the default and only method available

Usage Notes

If you want to use any default resource allocation method, then you do not need not specify it when creating or updating a plan.


CREATE_PLAN_DIRECTIVE Procedure

This procedure lets you create resource plan directives.

Syntax

DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE (
   plan                      IN VARCHAR2, 
   group_or_subplan          IN VARCHAR2, 
   comment                   IN VARCHAR2, 
   cpu_p1                    IN NUMBER   DEFAULT NULL, 
   cpu_p2                    IN NUMBER   DEFAULT NULL, 
   cpu_p3                    IN NUMBER   DEFAULT NULL, 
   cpu_p4                    IN NUMBER   DEFAULT NULL, 
   cpu_p5                    IN NUMBER   DEFAULT NULL, 
   cpu_p6                    IN NUMBER   DEFAULT NULL, 
   cpu_p7                    IN NUMBER   DEFAULT NULL, 
   cpu_p8                    IN NUMBER   DEFAULT NULL, 
   active_sess_pool_p1       IN NUMBER   DEFAULT NULL,
   queueing_p1               IN NUMBER   DEFAULT NULL,
   parallel_degree_limit_p1  IN NUMBER   DEFAULT NULL,
   switch_group              IN VARCHAR2 DEFAULT NULL,    
   switch_time               IN NUMBER   DEFAULT NULL, 
   switch_estimate           IN BOOLEAN  DEFAULT FALSE, 
   max_est_exec_time         IN NUMBER   DEFAULT NULL, 
   undo_pool                 IN NUMBER   DEFAULT NULL,
   max_idle_time             IN NUMBER   DEFAULT NULL,
               max_idle_blocker_time     IN NUMBER   DEFAULT NULL,
               switch_time_in_call       IN NUMBER   DEFAULT NULL); 

Parameters

Table 76-6  CREATE_PLAN_DIRECTIVE Procedure Parameters
Parameter Description

plan

The name of the resource plan.

group_or_subplan

The name of the consumer group or subplan.

comment

Comment for the plan directive.

cpu_p1

For EMPHASIS, specifies the CPU percentage at the first level. For RATIO, specifies the weight of cpu usage. Default is NULL for all CPU parameters.

cpu_p2

For EMPHASIS, specifies the CPU percentage at the second level. Not applicable for RATIO.

cpu_p3

For EMPHASIS, specifies the CPU percentage at the third level. Not applicable for RATIO.

cpu_p4

For EMPHASIS, specifies the CPU percentage at the fourth level. Not applicable for RATIO.

cpu_p5

For EMPHASIS, specifies the CPU percentage at the fifth level. Not applicable for RATIO.

cpu_p6

For EMPHASIS, specifies the CPU percentage at the sixth level. Not applicable for RATIO.

cpu_p7

For EMPHASIS, specifies the CPU percentage at the seventh level. Not applicable for RATIO.

cpu_p8

For EMPHASIS, specifies the CPU percentage at the eighth level. Not applicable for RATIO.

active_sess_pool_p1

Specifies maximum number of concurrently active sessions for a consumer group. Default is NULL, which means unlimited.

queueing_p1

Specified time (in seconds) after which a job in the inactive session queue (waiting for execution) will time out. Default is NULL, which means unlimited.

parallel_degree_limit_p1

Specifies a limit on the degree of parallelism for any operation. Default is NULL, which means unlimited.

switch_group

Specifies consumer group to which this session is switched if other switch criteria is met. Default is NULL. If the group name is 'CANCEL_SQL', the current call will be canceled when other switch criteria are met. If the group name is 'KILL_SESSION', the session will be killed when other switch criteria are met.

switch_time

Specifies time (in seconds) that a session can execute before an action is taken. Default is NULL, which means unlimited.

switch_estimate

If TRUE, tells Oracle to use its execution time estimate to automatically switch the consumer group of an operation before beginning its execution. Default is FALSE.

max_est_exec_time

Specifies the maximum execution time (in seconds) allowed for a session. If the optimizer estimates that an operation will take longer than MAX_EST_EXEC_TIME, the operation is not started and ORA-07455 is issued. If the optimizer does not provide an estimate, this directive has no effect. Default is NULL, which means unlimited.

undo_pool

Sets a maximum in kilobytes (K) on the total amount of undo generated by a consumer group. Default is NULL, which means unlimited.

max_idle_time

Indicates the maximum session idle time. Default is NULL, which means unlimited.

max_idle_blocker_time

The maximum amount of time in seconds that a session can be idle while blocking another session's acquisition of a resource.

switch_time_in_call

Specifies time (in seconds) that a session can execute before an action is taken. At the end of the top call, the consumer group of the session is restored to its original consumer group. Default is NULL, which means unlimited. Both SWITCH_TIME_IN_CALL and SWITCH_TIME cannot be specified.

Usage Notes


CREATE_SIMPLE_PLAN Procedure

This procedure creates a single-level resource plan containing up to eight consumer groups in one step. You do not need to create a pending area manually before creating a resource plan, or use the CREATE_CONSUMER_GROUP and CREATE_RESOURCE_PLAN_DIRECTIVES procedures separately.

Syntax

DBMS_RESOURCE_MANAGER.CREATE_SIMPLE_PLAN (
   SIMPLE_PLAN      IN  VARCHAR2  DEFAULT,
   CONSUMER_GROUP1  IN  VARCHAR2  DEFAULT,
   GROUP1_CPU       IN  NUMBER    DEFAULT,
   CONSUMER_GROUP2  IN  VARCHAR2  DEFAULT,
   GROUP2_CPU       IN  NUMBER    DEFAULT,
   CONSUMER_GROUP3  IN  VARCHAR2  DEFAULT,
   GROUP3_CPU       IN  NUMBER    DEFAULT,
   CONSUMER_GROUP4  IN  VARCHAR2  DEFAULT,
   GROUP4_CPU       IN  NUMBER    DEFAULT,
   CONSUMER_GROUP5  IN  VARCHAR2  DEFAULT,
   GROUP5_CPU       IN  NUMBER    DEFAULT,
   CONSUMER_GROUP6  IN  VARCHAR2  DEFAULT,
   GROUP6_CPU       IN  NUMBER    DEFAULT,
   CONSUMER_GROUP7  IN  VARCHAR2  DEFAULT,
   GROUP7_CPU       IN  NUMBER    DEFAULT,
   CONSUMER_GROUP8  IN  VARCHAR2  DEFAULT,
   GROUP8_CPU       IN  NUMBER    DEFAULT);

DELETE_CONSUMER_GROUP Procedure

This procedure lets you delete entries which define resource consumer groups.

Syntax

DBMS_RESOURCE_MANAGER.DELETE_CONSUMER_GROUP (
   consumer_group IN VARCHAR2); 

Parameters

Table 76-7  DELETE_CONSUMER_GROUP Procedure Parameters
Parameters Description

consumer_group

The name of the consumer group to be deleted.


DELETE_PLAN Procedure

This procedure deletes the specified plan as well as all the plan directives to which it refers.

Syntax

DBMS_RESOURCE_MANAGER.DELETE_PLAN (
   plan IN VARCHAR2); 

Parameters

Table 76-8  DELETE_PLAN Procedure Parameters
Parameter Description

plan

The name of the resource plan to delete.


DELETE_PLAN_DIRECTIVE Procedure

This procedure lets you delete resource plan directives.

Syntax

DBMS_RESOURCE_MANAGER.DELETE_PLAN_DIRECTIVE (
   plan              IN VARCHAR2, 
   group_or_subplan  IN VARCHAR2);

Parameters

Table 76-9  DELETE_PLAN_DIRECTIVE Procedure Parameters
Parameter Description

plan

The name of the resource plan.

group_or_subplan

The name of the group or subplan.


DELETE_PLAN_CASCADE Procedure

This procedure deletes the specified plan and all of its descendants (plan directives, subplans, consumer groups). Mandatory objects and directives are not deleted.

Syntax

DBMS_RESOURCE_MANAGER.DELETE_PLAN_CASCADE (
   plan IN VARCHAR2); 

Parameters

Table 76-10  DELETE_PLAN_CASCADE Procedure Parameters
Parameters Description

plan

The name of the plan.

Usage Notes

If DELETE_PLAN_CASCADE encounters any error, then it rolls back, and nothing is deleted.


SET_CONSUMER_GROUP_MAPPING Procedure

This procedure adds, deletes, or modifies entries that map sessions to consumer groups, based on the session's login and runtime attributes.

Syntax

DBMS_RESOURCE_MANAGER.SET_CONSUMER_GROUP_MAPPING(
   attribute       IN VARCHAR2, 
   value            IN VARCHAR2, 
   consumer_group  IN VARCHAR2 DEFAULT NULL); 

Parameters

Table 76-11  SET_CONSUMER_GROUP_MAPPING Procedure Parameters
Parameters Description

attribute

The mapping attribute to add/modify. It can be one of the Constants listed.

value

The attribute value to match.

consumer_group

The name of the mapped consumer group, or NULL to delete a mapping.

Usage Notes

If no mapping exists for the given attribute and value, a mapping to the given consumer group will be created. If a mapping already exists for the given attribute and value, the mapped consumer group will be updated to the one given. If the consumer_group argument is NULL, then any mapping from the given attribute and value will be deleted.


SET_CONSUMER_GROUP_MAPPING_PRI Procedure

Multiple attributes of a session can be used to map the session to a consumer group. This procedure prioritizes the attribute mappings.

Syntax

DBMS_RESOURCE_MANAGER.SET_CONSUMER_GROUP_MAPPING_PRI(
   explicit               IN NUMBER, 
   oracle_user            IN NUMBER, 
   service_name           IN NUMBER, 
   client_os_user         IN NUMBER, 
   client_program         IN NUMBER, 
   client_machine         IN NUMBER, 
   module_name            IN NUMBER, 
   module_name_action     IN NUMBER,
   service_module         IN NUMBER,
   service_module_action  IN NUMBER);

Parameters

Table 76-12  SET_CONSUMER_GROUP_MAPPING_PRI Procedure Parameters
Parameters Description

explicit

The priority of the explicit mapping.

oracle_user

The priority of the Oracle user name mapping.

service_name

The priority of the client service name mapping.

client_os_user

The priority of the client operating system user name mapping.

client_program

The priority of the client program mapping.

client_machine

The priority of the client machine mapping.

module_name

The priority of the application module name mapping.

module_name_action

The priority of the application module name and action mapping.

service_module

The priority of the service name and application module name mapping.

module_name_action

The priority of the service name, application module name, and application action mapping.

-PRIORITY

Usage Notes

Each priority value must be a unique integer from 1 to 10. Together, they establish an ordering where 1 is the highest priority and 10 is the lowest.


SET_INITIAL_CONSUMER_GROUP Procedure

The initial consumer group of a user is the consumer group to which any session created by that user initially belongs. This procedure sets the initial resource consumer group for a user.

Syntax

DBMS_RESOURCE_MANAGER.SET_INITIAL_CONSUMER_GROUP (
   user           IN VARCHAR2, 
   consumer_group IN VARCHAR2);

Parameters

Table 76-13  SET_INITIAL_CONSUMER_GROUP Procedure Parameters
Parameters Description

user

The name of the user.

consumer_group

The user's initial consumer group.

Usage Notes

The ADMINISTER_RESOURCE_MANAGER or the ALTER USER system privilege are required to be able to execute this procedure. The user, or PUBLIC, must be directly granted switch privilege to a consumer group before it can be set to be the user's initial consumer group. Switch privilege for the initial consumer group cannot come from a role granted to that user.


Note:

These semantics are similar to those for ALTER USER DEFAULT ROLE.


If the initial consumer group for a user has never been set, then the user's initial consumer group is automatically the consumer group: DEFAULT_CONSUMER_GROUP.

DEFAULT_CONSUMER_GROUP has switch privileges granted to PUBLIC; therefore, all users are automatically granted switch privilege for this consumer group. Upon deletion of a consumer group, all users having the deleted group as their initial consumer group now have DEFAULT_CONSUMER_GROUP as their initial consumer group. All currently active sessions belonging to a deleted consumer group are switched to DEFAULT_CONSUMER_GROUP.


SUBMIT_PENDING_AREA Procedure

This procedure lets you submit pending changes for the resource manager. It clears the pending area after validating and committing the changes (if valid).


Note:

A call to SUBMIT_PENDING_AREA may fail even if VALIDATE_PENDING_AREA succeeds. This may happen if a plan being deleted is loaded by an instance after a call to VALIDATE_PENDING_AREA, but before a call to SUBMIT_PENDING_AREA.


Syntax

DBMS_RESOURCE_MANAGER.SUBMIT_PENDING_AREA;

SWITCH_CONSUMER_GROUP_FOR_SESS Procedure

This procedure lets you change the resource consumer group of a specific session. It also changes the consumer group of any (PQ) slave sessions that are related to the top user session.

Syntax

DBMS_RESOURCE_MANAGER.SWITCH_CONSUMER_GROUP_FOR_SESS (
   session_id      IN NUMBER, 
   session_serial  IN NUMBER, 
   consumer_group  IN VARCHAR2);

Parameters

Table 76-14  SWITCH_CONSUMER_GROUP_FOR_SESS Procedure Parameters
Parameter Description

session_id

SID column from the view V$SESSION.

session_serial

SERIAL# column from view V$SESSION.

consumer_group

The name of the consumer group to switch to.


SWITCH_CONSUMER_GROUP_FOR_USER Procedure

This procedure lets you change the resource consumer group for all sessions with a given user ID. It also change the consumer group of any (PQ) slave sessions that are related to the top user session.

Syntax

DBMS_RESOURCE_MANAGER.SWITCH_CONSUMER_GROUP_FOR_USER (
   user            IN VARCHAR2, 
   consumer_group  IN VARCHAR2);

Parameters

Table 76-15  SWITCH_CONSUMER_GROUP_FOR_USER Procedure Parameters
Parameter Description

user

The name of the user.

consumer_group

The name of the consumer group to switch to.

Usage Notes

The SWITCH_CONSUMER_GROUP_FOR_SESS Procedure and SWITCH_CONSUMER_GROUP_FOR_USER procedures let you to raise or lower the allocation of CPU resources of certain sessions or users. This provides a functionality similar to the nice command on UNIX.

These procedures cause the session to be moved into the newly specified consumer group immediately.


SWITCH_PLAN Procedure

This procedure sets the current resource manager plan.

Syntax

DBMS_RESOURCE_MANAGER.SWITCH_PLAN(
   plan_name     IN     VARCHAR2,
   sid           IN     VARCHAR2 DEFAULT '*');

Parameters

Table 76-16  SWITCH_PLAN_GROUP_FOR_USER Procedure Parameters
Parameter Description

plan_name

The name of the plan to which to switch.

sid

The sid parameter is relevant only in a Real Application Clusters environment. This parameter lets you to change the plan for a particular instance. Specify the sid of the instance where you want to change the plan. Or specify '*' if you want Oracle to change the plan for all instances.


UPDATE_CONSUMER_GROUP Procedure

This procedure lets you update entries which define resource consumer groups.

Syntax

DBMS_RESOURCE_MANAGER.UPDATE_CONSUMER_GROUP (
   consumer_group  IN VARCHAR2, 
   new_comment     IN VARCHAR2 DEFAULT NULL, 
   new_cpu_mth     IN VARCHAR2 DEFAULT NULL); 

Parameters

Table 76-17  UPDATE_CONSUMER_GROUP Procedure Parameter
Parameter Description

consumer_group

The name of consumer group.

new_comment

New user's comment.

new_cpu_mth

The name of new method for CPU resource allocation.

Usage Notes

If the parameters to the UPDATE_CONSUMER_GROUP procedure are not specified, then they remain unchanged in the data dictionary.


UPDATE_PLAN Procedure

This procedure updates entries which define resource plans.

Syntax

DBMS_RESOURCE_MANAGER.UPDATE_PLAN (
   plan                               IN VARCHAR2, 
   new_comment                        IN VARCHAR2 DEFAULT NULL, 
   new_cpu_mth                        IN VARCHAR2 DEFAULT NULL, 
   new_active_sess_pool_mth           IN VARCHAR2 DEFAULT NULL,
   new_parallel_degree_limit_mth      IN VARCHAR2 DEFAULT NULL,
   new_queueing_mth                   IN VARCHAR2 DEFAULT NULL); 

Parameters

Table 76-18  UPDATE_PLAN Procedure Parameters
Parameter Description

plan

The name of resource plan.

new_comment

New user's comment.

new_cpu_mth

The name of new allocation method for CPU resources.

new_active_sess_pool_mth

The name of new method for maximum active sessions.

new_parallel_degree_limit_mth

The name of new method for degree of parallelism.

new_queueing_mth

Specifies type of queuing policy to use with active session pool feature.

Usage Notes


UPDATE_PLAN_DIRECTIVE Procedure

This procedure lets you update resource plan directives.

Syntax

DBMS_RESOURCE_MANAGER.UPDATE_PLAN_DIRECTIVE (
   plan                          IN VARCHAR2, 
   group_or_subplan              IN VARCHAR2, 
   new_comment                   IN VARCHAR2 DEFAULT NULL, 
   new_cpu_p1                    IN NUMBER   DEFAULT NULL, 
   new_cpu_p2                    IN NUMBER   DEFAULT NULL, 
   new_cpu_p3                    IN NUMBER   DEFAULT NULL, 
   new_cpu_p4                    IN NUMBER   DEFAULT NULL, 
   new_cpu_p5                    IN NUMBER   DEFAULT NULL, 
   new_cpu_p6                    IN NUMBER   DEFAULT NULL, 
   new_cpu_p7                    IN NUMBER   DEFAULT NULL, 
   new_cpu_p8                    IN NUMBER   DEFAULT NULL, 
   new_active_sess_pool_p1       IN NUMBER   DEFAULT NULL,
   new_queueing_p1               IN NUMBER   DEFAULT NULL,
   new_parallel_degree_limit_p1  IN NUMBER   DEFAULT NULL,
   new_switch_group              IN VARCHAR2 DEFAULT NULL, 
   new_switch_time               IN NUMBER   DEFAULT NULL, 
   new_switch_estimate           IN BOOLEAN  DEFAULT FALSE, 
   new_max_est_exec_time         IN NUMBER   DEFAULT NULL, 
   new_undo_pool                 IN NUMBER   DEFAULT NULL,
               new_max_idle_time             IN NUMBER   DEFAULT NULL,
               new_max_idle_blocker_time     IN NUMBER   DEFAULT NULL,
               new_switch_time_in_call       IN NUMBER   DEFAULT NULL);

Parameters

Table 76-19  UPDATE_PLAN_DIRECTIVE Procedure Parameters
Parameter Description

plan

The name of the resource plan.

group_or_subplan

The name of the consumer group or subplan.

new_comment

Comment for the plan directive.

new_cpu_p1

For EMPHASIS, specifies the CPU percentage at the first level. For RATIO, specifies the weight of CPU usage. Default is NULL for all CPU parameters.

new_cpu_p2

For EMPHASIS, specifies the CPU percentage at the second level. Not applicable for RATIO.

new_cpu_p3

For EMPHASIS, specifies the CPU percentage at the third level. Not applicable for RATIO.

new_cpu_p4

For EMPHASIS, specifies the CPU percentage at the fourth level. Not applicable for RATIO.

new_cpu_p5

For EMPHASIS, specifies the CPU percentage at the fifth level. Not applicable for RATIO.

new_cpu_p6

For EMPHASIS, specifies the CPU percentage at the sixth level. Not applicable for RATIO.

new_cpu_p7

For EMPHASIS, specifies the CPU percentage at the seventh level. Not applicable for RATIO.

new_cpu_p8

For EMPHASIS, specifies the CPU percentage at the eighth level. Not applicable for RATIO.

new_active_sess_pool_p1

Specifies maximum number of concurrently active sessions for a consumer group. Default is NULL, which means unlimited.

new_queueing_p1

Specified time (in seconds) after which a job in the inactive session queue (waiting for execution) will time out. Default is NULL, which means unlimited.

new_switch_group

Specifies a limit on the degree of parallelism for any operation. Default is NULL, which means unlimited.

new_switch_time

Specifies consumer group to which this session is switched if other switch criteria is met. Default is NULL. If the group name is 'CANCEL_SQL', the current call will be canceled when other switch criteria are met. If the group name is 'KILL_SESSION', the session will be killed when other switch criteria are met.

new_switch_estimate

Specifies time (in seconds) that a session can execute before an action is taken. Default is NULL, which means unlimited.

new_max_est_exec_time

If TRUE, tells Oracle to use its execution time estimate to automatically switch the consumer group of an operation before beginning its execution. Default is FALSE.

new_undo_pool

Specifies the maximum execution time (in seconds) allowed for a session. If the optimizer estimates that an operation will take longer than MAX_EST_EXEC_TIME, the operation is not started and ORA-07455 is issued. If the optimizer does not provide an estimate, this directive has no effect. Default is NULL, which means unlimited.

new_parallel_degree_limit_p1

Sets a maximum in kilobytes (K) on the total amount of undo generated by a consumer group. Default is NULL, which means unlimited.

new_max_idle_time

Indicates the maximum session idle time. Default is NULL, which means unlimited.

new_max_idle_blocker_time

The maximum amount of time in seconds that a session can be idle while blocking another session's acquisition of a resource.

new_switch_time_in_call

Specifies time (in seconds) that a session can execute before an action is taken. At the end of the top call, the consumer group of the session is restored to its original consumer group. Default is NULL, which means unlimited. Both SWITCH_TIME_IN_CALL and SWITCH_TIME cannot be specified.

Usage Notes


VALIDATE_PENDING_AREA Procedure

This procedure lets you validate pending changes for the resource manager.

Syntax

DBMS_RESOURCE_MANAGER.VALIDATE_PENDING_AREA;