|Oracle® Database Administrator's Guide
10g Release 1 (10.1)
Part Number B10739-01
This chapter describes how to manage and monitor the processes of an Oracle Database instance and contains the following topics:
Oracle Database creates server processes to handle the requests of user processes connected to an instance. A server process can be either of the following:
A dedicated server process, which services only one user process
A shared server process, which can service multiple user processes
Your database is always enabled to allow dedicated server processes, but you must specifically configure and enable shared server by setting one or more initialization parameters.
Figure 4-1, "Oracle Database Dedicated Server Processes" illustrates how dedicated server processes work. In this diagram two user processes are connected to the database through dedicated server processes.
In general, it is better to be connected through a dispatcher and use a shared server process. This is illustrated in Figure 4-2, "Oracle Database Shared Server Processes". A shared server process can be more efficient because it keeps the number of processes required for the running instance low.
In the following situations, however, users and administrators should explicitly connect to an instance using a dedicated server process:
To submit a batch job (for example, when a job can allow little or no idle time for the server process)
To use Recovery Manager (RMAN) to back up, restore, or recover a database
To request a dedicated server connection when Oracle Database is configured for shared server, users must connect using a net service name that is configured to use a dedicated server. Specifically, the net service name value should include the
SERVER=DEDICATED clause in the connect descriptor.
See Also:Oracle Net Services Administrator's Guide for more information about requesting a dedicated server connection
Figure 4-1 Oracle Database Dedicated Server Processes
Consider an order entry system with dedicated server processes. A customer phones the order desk and places an order, and the clerk taking the call enters the order into the database. For most of the transaction, the clerk is on the telephone talking to the customer. A server process is not needed during this time, so the server process dedicated to the clerk's user process remains idle. The system is slower for other clerks entering orders, because the idle server process is holding system resources.
Shared server architecture eliminates the need for a dedicated server process for each connection (see Figure 4-2).
Figure 4-2 Oracle Database Shared Server Processes
In a shared server configuration, client user processes connect to a dispatcher. The dispatcher can support multiple client connections concurrently. Each client connection is bound to a virtual circuit, which is a piece of shared memory used by the dispatcher for client database connection requests and replies. The dispatcher places a virtual circuit on a common queue when a request arrives.
An idle shared server process picks up the virtual circuit from the common queue, services the request, and relinquishes the virtual circuit before attempting to retrieve another virtual circuit from the common queue. This approach enables a small pool of server processes to serve a large number of clients. A significant advantage of shared server architecture over the dedicated server model is the reduction of system resources, enabling the support of an increased number of users.
For even better resource management, shared server can be configured for connection pooling. Connection pooling lets a dispatcher support more users by enabling the database server to time-out protocol connections and to use those connections to service an active session. Further, shared server can be configured for session multiplexing, which combines multiple sessions for transmission over a single network connection in order to conserve the operating system's resources.
Shared server architecture requires Oracle Net Services. User processes targeting the shared server must connect through Oracle Net Services, even if they are on the same machine as the Oracle Database instance.
See Also:Oracle Net Services Administrator's Guide for more detailed information about shared server, including features such as connection pooling and session multiplexing
Shared memory resources are preconfigured to allow the enabling of shared server at run time. You need not configure it by specifying parameters in your initialization parameter file, but you can do so if that better suits your environment. You can start dispatchers and shared server processes (shared servers) dynamically using the
ALTER SYSTEM statement.
This section discusses how to enable shared server and how to set or alter shared server initialization parameters. It contains the following topics:
See Also:Oracle Database SQL Reference for further information about the
The following initialization parameters control shared server operation:
SHARED_SERVERS: Specifies the initial number of shared servers to start and the minimum number of shared servers to keep. This is the only required parameter for using shared servers.
MAX_SHARED_SERVERS: Specifies the maximum number of shared servers that can run simultaneously.
SHARED_SERVER_SESSIONS: Specifies the total number of shared server user sessions that can run simultaneously. Setting this parameter enables you to reserve user sessions for dedicated servers.
DISPATCHERS: Configures dispatcher processes in the shared server architecture.
MAX_DISPATCHERS: Specifies the maximum number of dispatcher processes that can run simultaneously. This parameter can be ignored for now. It will only be useful in a future release when the number of dispatchers is auto-tuned according to the number of concurrent connections.
CIRCUITS: Specifies the total number of virtual circuits that are available for inbound and outbound network sessions.
See Also:Oracle Database Reference for more information about these initialization parameters
Shared server is enabled by setting the
SHARED_SERVERS initialization parameter to a value greater than 0. The other shared server initialization parameters need not be set. Because shared server requires at least one dispatcher in order to work, a dispatcher is brought up even if no dispatcher has been configured. Dispatchers are discussed in "Configuring Dispatchers".
Shared server can be started dynamically by setting the
SHARED_SERVERS parameter to a nonzero value with the
ALTER SYSTEM statement, or
SHARED_SERVERS can be included at database startup in the initialization parameter file. If
SHARED_SERVERS is not included in the initialization parameter file, or is included but is set to 0, then shared server is not enabled at database startup.
Note:For backward compatibility, if
However, if neither
The SHARED_SERVERS initialization parameter specifies the minimum number of shared servers that you want created when the instance is started. After instance startup, Oracle Database can dynamically adjust the number of shared servers based on how busy existing shared servers are and the length of the request queue.
In typical systems, the number of shared servers stabilizes at a ratio of one shared server for every ten connections. For OLTP applications, when the rate of requests is low, or when the ratio of server usage to request is low, the connections-to-servers ratio could be higher. In contrast, in applications where the rate of requests is high or the server usage-to-request ratio is high, the connections-to-server ratio could be lower.
The PMON (process monitor) background process cannot terminate shared servers below the value specified by
SHARED_SERVERS. Therefore, you can use this parameter to stabilize the load and minimize strain on the system by preventing PMON from terminating and then restarting shared servers because of coincidental fluctuations in load.
If you know the average load on your system, you can set
SHARED_SERVERS to an optimal value. The following example shows how you can use this parameter:
Assume a database is being used by a telemarketing center staffed by 1000 agents. On average, each agent spends 90% of the time talking to customers and only 10% of the time looking up and updating records. To keep the shared servers from being terminated as agents talk to customers and then spawned again as agents access the database, a DBA specifies that the optimal number of shared servers is 100.
However, not all work shifts are staffed at the same level. On the night shift, only 200 agents are needed. Since
SHARED_SERVERS is a dynamic parameter, a DBA reduces the number of shared servers to 20 at night, thus allowing resources to be freed up for other tasks such as batch jobs.
You can decrease the minimum number of shared servers that must be kept active by dynamically setting the
SHARED_SERVERS parameter to a lower value. Thereafter, until the number of shared servers is decreased to the value of the
SHARED_SERVERS parameter, any shared servers that become inactive are marked by PMON for termination.
The following statement reduces the number of shared servers:
ALTER SYSTEM SET SHARED_SERVERS = 5;
SHARED_SERVERS to 0 disables shared server. For more information, please refer to "Disabling Shared Servers".
MAX_SHARED_SERVERS parameter specifies the maximum number of shared servers that can be automatically created by PMON. It has no default value. If no value is specified, then PMON starts as many shared servers as is required by the load, subject to these limitations:
The process limit (set by the
PROCESSES initialization parameter)
A minimum number of free process slots (at least one-eighth of the total process slots, or two slots if
PROCESSES is set to less than 24)
Note:On Windows NT, take care when setting
The value of
SHARED_SERVERS overrides the value of
MAX_SHARED_SERVERS. Therefore, you can force PMON to start more shared servers than the
MAX_SHARED_SERVERS value by setting
SHARED_SERVERS to a value higher than
MAX_SHARED_SERVERS. You can subsequently place a new upper limit on the number of shared servers by dynamically altering the
MAX_SHARED_SERVERS to a value higher than
The primary reason to limit the number of shared servers is to reserve resources, such as memory and CPU time, for other processes. For example, consider the case of the telemarketing center discussed previously:
The DBA wants to reserve two thirds of the resources for batch jobs at night. He sets
MAX_SHARED_SERVERS to less than one third of the maximum number of processes (
PROCESSES). By doing so, the DBA ensures that even if all agents happen to access the database at the same time, batch jobs can connect to dedicated servers without having to wait for the shared servers to be brought down after processing agents' requests.
Another reason to limit the number of shared servers is to prevent the concurrent run of too many server processes from slowing down the system due to heavy swapping, although
PROCESSES can serve as the upper bound for this rather than
Still other reasons to limit the number of shared servers are testing, debugging, performance analysis, and tuning. For example, to see how many shared servers are needed to efficiently support a certain user community, you can vary
MAX_SHARED_SERVERS from a very small number upward until no delay in response time is noticed by the users.
SHARED_SERVER_SESSIONS initialization parameter specifies the maximum number of concurrent shared server user sessions. Setting this parameter, which is a dynamic parameter, lets you reserve database sessions for dedicated servers. This in turn ensures that administrative tasks that require dedicated servers, such as backing up or recovering the database, are not preempted by shared server sessions.
This parameter has no default value. If it is not specified, the system can create shared server sessions as needed, limited by the
SESSIONS initialization parameter.
CIRCUITS parameter sets a maximum limit on the number of virtual circuits that can be created in shared memory. This parameter has no default. If it is not specified, then the system can create circuits as needed, limited by the
DISPATCHERS initialization parameter and system resources.
DISPATCHERS initialization parameter configures dispatcher processes in the shared server architecture. At least one dispatcher process is required for shared server to work.If you do not specify a dispatcher, but you enable shared server by setting
SHARED_SERVER to a nonzero value, then by default Oracle Database creates one dispatcher for the TCP protocol. The equivalent
DISPATCHERS explicit setting of the initialization parameter for this configuration is:
You can configure more dispatchers, using the
DISPATCHERS initialization parameter, if either of the following conditions apply:
You need to configure a protocol other than TCP/IP. You configure a protocol address with one of the following attributes of the DISPATCHERS parameter:
You want to configure one or more of the optional dispatcher attributes:
A protocol address is required and is specified using one or more of the following attributes:
||Specify the network protocol address of the endpoint on which the dispatchers listen.|
||Specify the network description of the endpoint on which the dispatchers listen, including the network protocol address. The syntax is as follows:
||Specify the network protocol for which the dispatcher generates a listening endpoint. For example:
See the Oracle Net Services Reference Guide for further information about protocol address syntax.
The following attribute specifies how many dispatchers this configuration should have. It is optional and defaults to 1.
The following attributes tell the instance about the network attributes of each dispatcher of this configuration. They are all optional.
||Specify the maximum number of network connections to allow for each dispatcher.|
||Specify the maximum number of network sessions to allow for each dispatcher.|
||Specify the duration of a TICK in seconds. A TICK is a unit of time in terms of which the connection pool timeout can be specified. Used for connection pooling.|
||Specify an alias name for the listeners with which the PMON process registers dispatcher information. Set the alias to a name that is resolved through a naming method.|
||Used to enable the Oracle Connection Manager session multiplexing feature.|
||Used to enable connection pooling.|
||Specify the service names the dispatchers register with the listeners.|
You can specify either an entire attribute name a substring consisting of at least the first three characters. For example, you can specify
SESSI=3, and so forth.
See Also:Oracle Database Reference for more detailed descriptions of the attributes of the
Once you know the number of possible connections for each process for the operating system, calculate the initial number of dispatchers to create during instance startup, for each network protocol, using the following formula:
Number of dispatchers = CEIL ( max. concurrent sessions / connections for each dispatcher )
CEIL returns the result roundest up to the next whole integer.
For example, assume a system that can support 970 connections for each process, and that has:
A maximum of 4000 sessions concurrently connected through TCP/IP and
A maximum of 2,500 sessions concurrently connected through TCP/IP with SSL
DISPATCHERS attribute for TCP/IP should be set to a minimum of five dispatchers (4000 / 970), and for TCP/IP with SSL three dispatchers (2500 / 970:
Depending on performance, you may need to adjust the number of dispatchers.
You can specify multiple dispatcher configurations by setting
DISPATCHERS to a comma separated list of strings, or by specifying multiple
DISPATCHERS parameters in the initialization file. If you specify
DISPATCHERS multiple times, the lines must be adjacent to each other in the initialization parameter file. Internally, Oracle Database assigns an
INDEX value (beginning with zero) to each
DISPATCHERS parameter. You can later refer to that
DISPATCHERS parameter in an
ALTER SYSTEM statement by its index number.
Some examples of setting the
DISPATCHERS initialization parameter follow.
This is a typical example of setting the
DISPATCHERS initialization parameter.
The following hypothetical example will create two dispatchers that will listen on the specified IP address. The address must be a valid IP address for the host that the instance is on. (The host may be configured with multiple IP addresses.)
To force the dispatchers to use a specific port as the listening endpoint, add the
PORT attribute as follows:
You can control the number of dispatcher processes in the instance. Unlike the number of shared servers, the number of dispatchers does not change automatically. You change the number of dispatchers explicitly with the
ALTER SYSTEM statement. In this release of Oracle Database, you can increase the number of dispatchers to more than the limit specified by the
MAX_DISPATCHERS parameter. It is planned that
MAX_DISPATCHERS will be taken into consideration in a future release.
Monitor the following views to determine the load on the dispatcher processes:
See Also:Oracle Database Performance Tuning Guide for information about monitoring these views to determine dispatcher load and performance
If these views indicate that the load on the dispatcher processes is consistently high, then performance may be improved by starting additional dispatcher processes to route user requests. In contrast, if the load on dispatchers is consistently low, reducing the number of dispatchers may improve performance.
To dynamically alter the number of dispatchers when the instance is running, use the
ALTER SYSTEM statement to modify the
DISPATCHERS attribute setting for an existing dispatcher configuration. You can also add new dispatcher configurations to start dispatchers with different network attributes.
When you reduce the number of dispatchers for a particular dispatcher configuration, the dispatchers are not immediately removed. Rather, as users disconnect, Oracle Database terminates dispatchers down to the limit you specify in
For example, suppose the instance was started with this
DISPATCHERS setting in the initialization parameter file:
To increase the number of dispatchers for the TCP/IP protocol from 2 to 3, and decrease the number of dispatchers for the TCP/IP with SSL protocol from 2 to 1, you can issue the following statement:
ALTER SYSTEM SET DISPATCHERS = '(INDEX=0)(DISP=3)', '(INDEX=1)(DISP=1)';
ALTER SYSTEM SET DISPATCHERS = '(PROT=tcp)(DISP=3)', '(PROT-tcps)(DISP=1)';
Note:You need not specify (
If fewer than three dispatcher processes currently exist for TCP/IP, the database creates new ones. If more than one dispatcher process currently exists for TCP/IP with SSL, then the database terminates the extra ones as the connected users disconnect.
Suppose that instead of changing the number of dispatcher processes for the TCP/IP protocol, you want to add another TCP/IP dispatcher that supports connection pooling. You can do so by entering the following statement:
ALTER SYSTEM SET DISPATCHERS = '(INDEX=2)(PROT=tcp)(POOL=on)';
INDEX attribute is needed to add the new dispatcher configuration. If you omit (
INDEX=2) in the preceding statement, then the TCP/IP dispatcher configuration at INDEX 0 will be changed to support connection pooling, and the number of dispatchers for that configuration will be reduced to 1, which is the default when the number of dispatchers (attribute
DISPATCHERS) is not specified.
INDEX keyword can be used to identify which dispatcher configuration to modify. If you do not specify
INDEX, then the first dispatcher configuration matching the
PROTOCOL specified will be modified. If no match is found among the existing dispatcher configurations, then a new dispatcher will be added.
INDEX value can range from 0 to
n is the current number of dispatcher configurations. If your
ALTER SYSTEM statement specifies an
INDEX value equal to
n is the current number of dispatcher configurations, a new dispatcher configuration will be added.
To see the values of the current dispatcher configurations--that is, the number of dispatchers, whether connection pooling is on, and so forth--query the
V$DISPATCHER_CONFIG dynamic performance view. To see which dispatcher configuration a dispatcher is associated with, query the
CONF_INDX column of the
When you change the
POOL attributes of a dispatcher configuration, the change does not take effect for existing dispatchers but only for new dispatchers. Therefore, in order for the change to be effective for all dispatchers associated with a configuration, you must forcibly kill existing dispatchers after altering the
DISPATCHERS parameter, and let the database start new ones in their place with the newly specified properties.
SERVICES are not subject to the same constraint. They apply to existing dispatchers associated with the modified configuration. Attribute
SESSIONS applies to existing dispatchers only if its value is reduced. However, if its value is increased, it is applied only to newly started dispatchers.
ALTER SYSTEM statement, you leave it up to the database to determine which dispatchers to shut down to reduce the number of dispatchers. Alternatively, it is possible to shut down specific dispatcher processes. To identify the name of the specific dispatcher process to shut down, use the
V$DISPATCHER dynamic performance view.
SELECT NAME, NETWORK FROM V$DISPATCHER;
Each dispatcher is uniquely identified by a name of the form Dnnn.
To shut down dispatcher
D002, issue the following statement:
ALTER SYSTEM SHUTDOWN IMMEDIATE 'D002';
IMMEDIATE keyword stops the dispatcher from accepting new connections and the database immediately terminates all existing connections through that dispatcher. After all sessions are cleaned up, the dispatcher process shuts down. If
IMMEDIATE were not specified, the dispatcher would wait until all of its users disconnected and all of its connections terminated before shutting down.
You disable shared server by setting
SHARED_SERVERS to 0. No new client can connect in shared mode. However, when you set
SHARED_SERVERS to 0, Oracle Database retains some shared servers until all shared server connections are closed. The number of shared servers retained is either the number specified by the preceding setting of
SHARED_SERVERS or the value of the
MAX_SHARED_SERVERS parameter, whichever is smaller. If both
MAX_SHARED_SERVERS are set to 0, then all shared servers will terminate and requests from remaining shared server clients will be queued until the value of
MAX_SHARED_SERVERS is raised again.
To terminate dispatchers once all shared server clients disconnect, enter this statement:
ALTER SYSTEM SET DISPATCHERS = '';
||Provides information on the dispatcher processes, including name, network address, status, various usage statistics, and index number.|
||Provides configuration information about the dispatchers.|
||Provides rate statistics for the dispatcher processes.|
||Contains information on the shared server message queues.|
||Contains information on the shared servers.|
||Contains information about virtual circuits, which are user connections to the database through dispatchers and servers.|
||Contains information for tuning shared server.|
||Contains size information about various system global area (SGA) groups. May be useful when tuning shared server.|
||Contains detailed statistical information about the SGA, useful for tuning.|
||Lists statistics to help tune the reserved pool and space within the shared pool.|
To maximize performance and accommodate many users, a multiprocess Oracle Database system uses background processes. Background processes consolidate functions that would otherwise be handled by multiple database programs running for each user process. Background processes asynchronously perform I/O and monitor other Oracle Database processes to provide increased parallelism for better performance and reliability.
Table 4-1 describes the basic Oracle Database background processes, many of which are discussed in more detail elsewhere in this book. The use of additional database server features or options can cause more background processes to be present. For example, when you use Advanced Queuing, the queue monitor (QMNn) background process is present. When you specify the
FILE_MAPPING initialization parameter for mapping datafiles to physical devices on a storage subsystem, then the FMON process is present.
Table 4-1 Oracle Database Background Processes
|Database writer (DBWn)||The database writer writes modified blocks from the database buffer cache to the datafiles. Oracle Database allows a maximum of 20 database writer processes (DBW0-DBW9 and DBWa-DBWj). The initialization parameter |
For more information about setting the
|Log writer (LGWR)||The log writer process writes redo log entries to disk. Redo log entries are generated in the redo log buffer of the system global area (SGA), and LGWR writes the redo log entries sequentially into a redo log file. If the database has a multiplexed redo log, LGWR writes the redo log entries to a group of redo log files. See Chapter 6, " Managing the Redo Log" for information about the log writer process.|
|Checkpoint (CKPT)||At specific times, all modified database buffers in the system global area are written to the datafiles by DBWn. This event is called a checkpoint. The checkpoint process is responsible for signalling DBWn at checkpoints and updating all the datafiles and control files of the database to indicate the most recent checkpoint.|
|System monitor (SMON)||The system monitor performs recovery when a failed instance starts up again. In a Real Application Clusters database, the SMON process of one instance can perform instance recovery for other instances that have failed. SMON also cleans up temporary segments that are no longer in use and recovers dead transactions skipped during system failure and instance recovery because of file-read or offline errors. These transactions are eventually recovered by SMON when the tablespace or file is brought back online.
SMON also coalesces free extents within the database dictionary-managed tablespaces to make free space contiguous and easier to allocate. See "Coalescing Free Space in Dictionary-Managed Tablespaces").
|Process monitor (PMON)||The process monitor performs process recovery when a user process fails. PMON is responsible for cleaning up the cache and freeing resources that the process was using. PMON also checks on the dispatcher processes (described later in this table) and server processes and restarts them if they have failed.|
|Archiver (ARCn)||One or more archiver processes copy the redo log files to archival storage when they are full or a log switch occurs. Archiver processes are the subject of Chapter 7, " Managing Archived Redo Logs".|
|Recoverer (RECO)||The recoverer process is used to resolve distributed transactions that are pending due to a network or system failure in a distributed database. At timed intervals, the local RECO attempts to connect to remote databases and automatically complete the commit or rollback of the local portion of any pending distributed transactions. For information about this process and how to start it, see Chapter 33, " Managing Distributed Transactions".|
|Dispatcher (Dnnn)||Dispatchers are optional background processes, present only when the shared server configuration is used. Shared server was discussed previously in "Configuring Oracle Database for Shared Server".|
|Global Cache Service (LMS)||In an Oracle Real Application Clusters environment, this process manages resources and provides inter-instance resource control.|
See Also:Oracle Database Concepts for more information about Oracle Database background processes
Note:The parallel execution feature described in this section is available with the Oracle Database Enterprise Edition.
This section describes how to manage parallel processing of SQL statements. In this configuration Oracle Database can divide the work of processing an SQL statement among multiple parallel processes.
The execution of many SQL statements can be parallelized. The degree of parallelism is the number of parallel execution servers that can be associated with a single operation. The degree of parallelism is determined by any of the following:
PARALLEL clause in a statement
For objects referred to in a query, the
PARALLEL clause that was used when the object was created or altered
A default determined by the database
An example of using parallel SQL execution is contained in "Parallelizing Table Creation".
The following topics are contained in this section:
When an instance starts up, Oracle Database creates a pool of parallel execution servers which are available for any parallel operation. A process called the parallel execution coordinator dispatches the execution of a pool of parallel execution servers and coordinates the sending of results from all of these parallel execution servers back to the user.
The parallel execution servers are enabled by default, because by default the value for
PARALLEL_MAX_SERVERS initialization parameter is set >0. The processes are available for use by the various Oracle Database features that are capable of exploiting parallelism. Related initialization parameters are tuned by the database for the majority of users, but you can alter them as needed to suit your environment. For ease of tuning, some parameters can be altered dynamically.
Parallelism can be used by a number of features, including transaction recovery, replication, and SQL execution. In the case of parallel SQL execution, the topic discussed in this book, parallel server processes remain associated with a statement throughout its execution phase. When the statement is completely processed, these processes become available to process other statements.
See Also:Oracle Data Warehousing Guide for more information about using and tuning parallel execution, including parallel SQL execution
You control parallel SQL execution for a session using the
ALTER SESSION statement.
You disable parallel SQL execution with an
ALTER SESSION DISABLE PARALLEL DML|DDL|QUERY statement. All subsequent DML (
DELETE), DDL (
ALTER), or query (
SELECT) operations are executed serially after such a statement is issued. They will be executed serially regardless of any
PARALLEL clause associated with the statement or parallel attribute associated with the table or indexes involved.
The following statement disables parallel DDL operations:
ALTER SESSION DISABLE PARALLEL DDL;
You enable parallel SQL execution with an
ALTER SESSION ENABLE PARALLEL DML|DDL|QUERY statement. Subsequently, when a
PARALLEL clause or parallel hint is associated with a statement, those DML, DDL, or query statements will execute in parallel. By default, parallel execution is enabled for DDL and query statements.
A DML statement can be parallelized only if you specifically issue an
ALTER SESSION statement to enable parallel DML:
ALTER SESSION ENABLE PARALLEL DML;
You can force parallel execution of all subsequent DML, DDL, or query statements for which parallelization is possible with the
ALTER SESSION FORCE PARALLEL DML|DDL|QUERY statement. Additionally you can force a specific degree of parallelism to be in effect, overriding any
PARALLEL clause associated with subsequent statements. If you do not specify a degree of parallelism in this statement, the default degree of parallelism is used. However, a degree of parallelism specified in a statement through a hint will override the degree being forced.
The following statement forces parallel execution of subsequent statements and sets the overriding degree of parallelism to 5:
ALTER SESSION FORCE PARALLEL DDL PARALLEL 5;
External procedures are procedures written in one language that are called from another program in a different language. An example is a PL/SQL program calling one or more C routines that are required to perform special-purpose processing.
These callable routines are stored in a dynamic link library (DLL), or a libunit in the case of a Java class method, and are registered with the base language. Oracle Database provides a special-purpose interface, the call specification (call spec), that enables users to call external procedures from other languages.
To call an external procedure, an application alerts a network listener process, which in turn starts an external procedure agent. The default name of the agent is
extproc, and this agent must reside on the same computer as the database server. Using the network connection established by the listener, the application passes to the external procedure agent the name of the DLL or libunit, the name of the external procedure, and any relevant parameters. The external procedure agent then loads, DLL or libunit, runs the external procedure, and passes back to the application any values returned by the external procedure.
To control access to DLLs, the database administrator grants execute privileges on the appropriate DLLs to application developers. The application developers write the external procedures and grant execute privilege on specific external procedures to other users.
Note:The external library (DLL file) must be statically linked. In other words, it must not reference any external symbols from other external libraries (DLL files). Oracle Database does not resolve such symbols, so they can cause your external procedure to fail.
The environment for calling external procedures, consisting of
listener.ora entries, is configured by default during the installation of your database. You may need to perform additional network configuration steps for a higher level of security. These steps are documented in the Oracle Net Services Administrator's Guide.
See Also:Oracle Database Application Developer's Guide - Fundamentals for information about external procedures
Sometimes it is necessary to terminate current user sessions. For example, you might want to perform an administrative operation and need to terminate all nonadministrative sessions. This section describes the various aspects of terminating sessions, and contains the following topics:
When a session is terminated, any active transactions of the session are rolled back, and resources held by the session (such as locks and memory areas) are immediately released and available to other sessions.
You terminate a current session using the SQL statement
ALTER SYSTEM KILL SESSION. The following statement terminates the session whose system identifier is 7 and serial number is 15:
ALTER SYSTEM KILL SESSION '7,15';
To identify which session to terminate, specify the session index number and serial number. To identify the system identifier (SID) and serial number of a session, query the
V$SESSION dynamic performance view. For example, the following query identifies all sessions for the user
SELECT SID, SERIAL#, STATUS FROM V$SESSION WHERE USERNAME = 'JWARD'; SID SERIAL# STATUS ----- --------- -------- 7 15 ACTIVE 12 63 INACTIVE
A session is
ACTIVE when it is making a SQL call to Oracle Database. A session is
INACTIVE if it is not making a SQL call to the database.
See Also:Oracle Database Reference for a description of the status values for a session
ORA-00028: your session has been killed
If, after receiving the
ORA-00028 message, a user submits additional statements before reconnecting to the database, Oracle Database returns the following message:
ORA-01012: not logged on
An active session cannot be interrupted when it is performing network I/O or rolling back a transaction. Such a session cannot be terminated until the operation completes. In this case, the session holds all resources until it is terminated. Additionally, the session that issues the
ALTER SYSTEM statement to terminate a session waits up to 60 seconds for the session to be terminated. If the operation that cannot be interrupted continues past one minute, the issuer of the
ALTER SYSTEM statement receives a message indicating that the session has been marked to be terminated. A session marked to be terminated is indicated in
V$SESSION with a status of
KILLED and a server that is something other than
If the session is not making a SQL call to Oracle Database (is
INACTIVE) when it is terminated, the
ORA-00028 message is not returned immediately. The message is not returned until the user subsequently attempts to use the terminated session.
When an inactive session has been terminated, the
STATUS of the session in the
V$SESSION view is
KILLED. The row for the terminated session is removed from
V$SESSION after the user attempts to use the session again and receives the
SELECT SID,SERIAL#,STATUS,SERVER FROM V$SESSION WHERE USERNAME = 'JWARD'; SID SERIAL# STATUS SERVER ----- -------- --------- --------- 7 15 INACTIVE DEDICATED 12 63 INACTIVE DEDICATED 2 rows selected. ALTER SYSTEM KILL SESSION '7,15'; Statement processed. SELECT SID, SERIAL#, STATUS, SERVER FROM V$SESSION WHERE USERNAME = 'JWARD'; SID SERIAL# STATUS SERVER ----- -------- --------- --------- 7 15 KILLED PSEUDO 12 63 INACTIVE DEDICATED 2 rows selected.
It is important that you monitor the operation of your database on a regular basis. Doing so not only informs you about errors that have not yet come to your attention but also gives you a better understanding of the normal operation of your database. Being familiar with normal behavior in turn helps you recognize when something is wrong.
This section describes some of the options available to you for monitoring the operation of your database.
A server-generated alert is a notification from the Oracle Database server of an impending problem. The notification may contain suggestions for correcting the problem. Notifications are also provided when the problem condition has been cleared.
Alerts are automatically generated when a problem occurs or when data does not match expected values for metrics, such as the following:
Physical Reads Per Sec
User Commits Per Sec
SQL Service Response Time
Server-generated alerts can be based on threshold levels or can issue simply because an event has occurred. Threshold-based alerts can be triggered at both threshold warning and critical levels. The value of these levels can be customer-defined or internal values, and some alerts have default threshold levels which you can change if appropriate. For example, by default a server-generated alert is generated for tablespace space usage when the percentage of space usage exceeds either the 85% warning or 97% critical threshold level. Examples of alerts not based on threshold levels are:
Snapshot Too Old
Resumable Session Suspended
Recovery Area Space Usage
An alert message is sent to the predefined persistent queue
ALERT_QUE owned by the user
SYS. Oracle Enterprise Manager reads this queue and provides notifications about outstanding server alerts, and sometimes suggests actions for correcting the problem. The alerts are displayed on the Enterprise Manager console and can be configured to send email or pager notifications to selected administrators. If an alert cannot be written to the alert queue, a message about the alert is written to the Oracle Database alert log.
Background processes periodically flush the data to the Automatic Workload Repository to capture a history of metric values. The alert history table and
ALERT_QUE are purged automatically by the system at regular intervals.
On the Database Home page, click on the Manage Metrics link at the bottom of the page to display the Thresholds page.
On the Thresholds page, you can edit the threshold values.
See Also:Oracle Enterprise Manager Concepts for information about alerts available with Oracle Enterprise Manager
You can view and change threshold settings for the server alert metrics using the
GET_THRESHOLD procedures of the
DBMS_SERVER_ALERTS PL/SQL package. The
DBMS_AQADM packages provide procedures for accessing and reading alert messages in the alert queue.
See Also:PL/SQL Packages and Types Reference for information about the
The following example shows how to set thresholds with the
SET_THRESHOLD procedure for CPU time for each user call for an instance:
DBMS_SERVER_ALERT.SET_THRESHOLD( DBMS_SERVER_ALERT.CPU_TIME_PER_CALL, DBMS_SERVER_ALERT.OPERATOR_GE, '8000', DBMS_SERVER_ALERT.OPERATOR_GE, '10000', 1, 2, 'inst1', DBMS_SERVER_ALERT.OBJECT_TYPE_SERVICE, 'main.regress.rdbms.dev.us.oracle.com');
In this example, a warning alert is issued when CPU time exceeds 8000 microseconds for each user call and a critical alert is issued when CPU time exceeds 10,000 microseconds for each user call. The arguments include:
CPU_TIME_PER_CALL specifies the metric identifier. For a list of support metrics, see PL/SQL Packages and Types Reference.
The observation period is set to 1 minute. This period specifies the number of minutes that the condition must deviate from the threshold value before the alert is issued.
The number of consecutive occurrences is set to 2. This number specifies how many times the metric value must violate the threshold values before the alert is generated.
The name of the instance is set to
DBMS_ALERT.OBJECT_TYPE_SERVICE specifies the object type on which the threshold is set. In this example, the service name is
To retrieve threshold values, use the
GET_THRESHOLD procedure. For example:
DECLARE warning_operator BINARY_INTEGER; warning_value VARCHAR2(60); critical_operator BINARY_INTEGER; critical_value VARCHAR2(60); observation_period BINARY_INTEGER; consecutive_occurrences BINARY_INTEGER; BEGIN DBMS_SERVER_ALERT.GET_THRESHOLD( DBMS_SERVER_ALERT.CPU_TIME_PER_CALL, warning_operator, warning_value, critical_operator, critical_value, observation_period, consecutive_occurrences, 'inst1', DBMS_SERVER_ALERT.OBJECT_TYPE_SERVICE, 'main.regress.rdbms.dev.us.oracle.com'); DBMS_OUTPUT.PUT_LINE('Warning operator: ' || warning_operator); DBMS_OUTPUT.PUT_LINE('Warning value: ' || warning_value); DBMS_OUTPUT.PUT_LINE('Critical operator: ' || critical_operator); DBMS_OUTPUT.PUT_LINE('Critical value: ' || critical_value); DBMS_OUTPUT.PUT_LINE('Observation_period: ' || observation_period); DBMS_OUTPUT.PUT_LINE('Consecutive occurrences:' || consecutive_occurrences); END; /
You can also check specific threshold settings with the
DBA_THRESHOLDS view. For example:
SELECT metrics_name, warning_value, critical_value, consecutive_occurrences FROM DBA_THRESHOLDS WHERE metrics_name LIKE '%CPU Time%';
If you use your own tool rather than Enterprise Manager to display alerts, you must subscribe to the
ALERT_QUE, read the
ALERT_QUE, and display an alert notification after setting the threshold levels for an alert. To create an agent and subscribe the agent to the
ALERT_QUE, use the
ADD_SUBSCRIBER procedures of the
Next you must associate a database user with the subscribing agent, because only a user associated with the subscribing agent can access queued messages in the secure
ALERT_QUE. You must also assign the enqueue privilege to the user. Use the
GRANT_QUEUE_PRIVILEGE procedures of the
Optionally, you can register with the
DBMS_AQ.REGISTER procedure to receive an asynchronous notification when an alert is enqueued to
ALERT_QUE. The notification can be in the form of email, HTTP post, or PL/SQL procedure.
To read an alert message, you can use the
DBMS_AQ.DEQUEUE procedure or
OCIAQDeq call. After the message has been dequeued, use the
DBMS_SERVER_ALERT.EXPAND_MESSAGE procedure to expand the text of the message.
The following dictionary views provide information about server alerts:
DBA_THRESHOLDS lists the threshold settings defined for the instance.
DBA_OUTSTANDING_ALERTS describes the outstanding alerts in the database.
DBA_ALERT_HISTORY lists a history of alerts that have been cleared.
V$ALERT_TYPES provides information such as group and type for each alert.
V$METRICNAME contains the names, identifiers, and other information about the system metrics.
V$METRIC_HISTORY views contain system-level metric values in memory.
See Also:Oracle Database Reference for information on static data dictionary views and dynamic performance views
Each server and background process can write to an associated trace file. When an internal error is detected by a process, it dumps information about the error to its trace file. Some of the information written to a trace file is intended for the database administrator, Other information is for Oracle Support Services. Trace file information is also used to tune applications and instances.
All internal errors (
ORA-600), block corruption errors (
ORA-1578), and deadlock errors (
ORA-60) that occur
Administrative operations, such as
DROP statements and
Messages and errors relating to the functions of shared server and dispatcher processes
Errors occurring during the automatic refresh of a materialized view
The values of all initialization parameters that had nondefault values at the time the database and instance start
Oracle Database uses the alert file to record these operations as an alternative to displaying the information on an operator's console (although some systems also display information on the console). If an operation is successful, a "completed" message is written in the alert file, along with a timestamp.
Initialization parameters controlling the location and size of trace files are:
These parameters are discussed in the sections that follow.
See Also:Oracle Database Reference for information about initialization parameters that control the writing to trace files
Check the alert file and other trace files of an instance periodically to learn whether the background processes have encountered errors. For example, when the log writer process (LGWR) cannot write to a member of a log group, an error message indicating the nature of the problem is written to the LGWR trace file and the database alert file. Such an error message means that a media or I/O problem has occurred and should be corrected immediately.
Oracle Database also writes values of initialization parameters to the alert file, in addition to other important statistics.
All trace files for background processes and the alert file are written to the directory specified by the initialization parameter
BACKGROUND_DUMP_DEST. All trace files for server processes are written to the directory specified by the initialization parameter
USER_DUMP_DEST. The names of trace files are operating system specific, but each file usually includes the name of the process writing the file (such as LGWR and RECO).
See Also:Your operating system specific Oracle documentation for information about the names of trace files
You can control the maximum size of all trace files (excluding the alert file) using the initialization parameter
MAX_DUMP_FILE_SIZE, which limits the file to the specified number of operating system blocks. To control the size of an alert file, you must manually delete the file when you no longer need it. Otherwise the database continues to append to the file.
You can safely delete the alert file while the instance is running, although you should consider making an archived copy of it first. This archived copy could prove valuable if you should have a future problem that requires investigating the history of an instance.
Background processes always write to a trace file when appropriate. In the case of the ARCn background process, it is possible, through an initialization parameter, to control the amount and type of trace information that is produced. This behavior is described in "Controlling Trace Output Generated by the Archivelog Process". Other background processes do not have this flexibility.
Trace files are written on behalf of server processes whenever internal errors occur. Additionally, setting the initialization parameter
SQL_TRACE = TRUE causes the SQL trace facility to generate performance statistics for the processing of all SQL statements for an instance and write them to the
Optionally, you can request that trace files be generated for server processes. Regardless of the current value of the
SQL_TRACE initialization parameter, each session can enable or disable trace logging on behalf of the associated server process by using the SQL statement
ALTER SESSION SET SQL_TRACE. This example enables the SQL trace facility for a specific session:
ALTER SESSION SET SQL_TRACE TRUE;
Caution:The SQL trace facility for server processes can cause significant system overhead resulting in severe performance impact, so you should enable this feature only when collecting statistics.
DBMS_SESSION or the
DBMS_MONITOR package if you want to control SQL tracing for a session.
If shared server is enabled, each session using a dispatcher is routed to a shared server process, and trace information is written to the server trace file only if the session has enabled tracing (or if an error is encountered). Therefore, to track tracing for a specific session that connects using a dispatcher, you might have to explore several shared server trace files. To help you, Oracle provides a command line utility program,
trcsess, which consolidates all trace information pertaining to a user session in one place and orders the information by time.
See Also:Oracle Database Performance Tuning Guide for information about using the SQL trace facility and using
Locks are mechanisms that prevent destructive interaction between transactions accessing the same resource. The resources can be either user objects, such as tables and rows, or system objects not visible to users, such as shared data structures in memory and data dictionary rows. Oracle Database automatically obtains and manages necessary locks when executing SQL statements, so you need not be concerned with such details. However, the database also lets you lock data manually.
A deadlock can occur when two or more users are waiting for data locked by each other. Deadlocks prevent some transactions from continuing to work. Oracle Database automatically detects deadlock situations and resolves them by rolling back one of the statements involved in the deadlock, thereby releasing one set of the conflicting row locks.
Oracle Database is designed to avoid deadlocks, and they are not common. Most often they occur when transactions explicitly override the default locking of the database. Deadlocks can affect the performance of your database, so Oracle provides some scripts and views that enable you to monitor locks.
utllockt.sql script displays, in a tree fashion, the sessions in the system that are waiting for locks and the locks that they are waiting for. The location of this script file is operating system dependent.
The following views can help you to monitor locks:
||Lists the locks currently held by Oracle Database and outstanding requests for a lock or latch|
||Displays a session if it is holding a lock on an object for which another session is waiting|
||Displays a session if it is waiting for a locked object|
||Lists all DDL locks held in the database and all outstanding requests for a DDL lock|
||Lists all DML locks held in the database and all outstanding requests for a DML lock|
||Lists all locks or latches held in the database and all outstanding requests for a lock or latch|
||Displays a row for each lock or latch that is being held, and one row for each outstanding request for a lock or latch|
Wait events are statistics that are incremented by a server process to indicate that it had to wait for an event to complete before being able to continue processing. A session could wait for a variety of reasons, including waiting for more input, waiting for the operating system to complete a service such as a disk write, or it could wait for a lock or latch.
When a session is waiting for resources, it is not doing any useful work. A large number of waits is a source of concern. Wait event data reveals various symptoms of problems that might be affecting performance, such as latch contention, buffer contention, and I/O contention.
Oracle provides several views that display wait event statistics. A discussion of these views and their role in instance tuning is contained in Oracle Database Performance Tuning Guide.
This section lists some of the data dictionary views that you can use to monitor an Oracle Database instance. These views are general in their scope. Other views, more specific to a process, are discussed in the section of this book where the process is described.
||Contains information about the currently active processes|
||Lists all locks acquired by every transaction on the system|
||Lists session information for each current session|
||Contains I/O statistics for each user session|
||Displays the status of various operations that run for longer than 6 seconds (in absolute time). These operations currently include many backup and recovery functions, statistics gathering, and query execution. More operations are added for every Oracle Database release.|
||Lists the resources or events for which active sessions are waiting|
||Contains session statistics|
||Provides information about current and maximum global resource utilization for some system resources|
||Contains statistics about shared SQL area and contains one row for each SQL string. Also provides statistics about SQL statements that are in memory, parsed, and ready for execution|
||Contains statistics for nonparent latches and summary statistics for parent latches|
See Also:Oracle Database Reference contains detailed descriptions of these views