|Oracle Procedural Gateway® for WebSphere MQ Installation and User's Guide,
10g Release 2 (10.2) for Windows
|PDF · Mobi · ePub|
WebSphere MQ has its own authorization mechanism. Applications are enabled to perform certain operations on queues or queue managers only when their effective user ID has authorization for each operation. The effective user ID, typically the operating system user, depends on the WebSphere MQ environment and the platform it runs on.
The effective user ID in an Oracle environment is not dependent on an operating system account or the platform. Because of this difference, the gateway provides two authorization models for Oracle applications to work with WebSphere MQ:
Although Oracle and operating system user IDs can be longer than 12 characters, the length of user IDs used for either model cannot exceed 12 characters. Oracle user accounts do not have a minimum number of characters required for their passwords, but some platforms and operating systems do. Take their requirements into consideration when deciding on a password or user ID.
The authorization model is configured with the
AUTHORIZATION_MODEL parameter in the gateway initialization file. Refer to Appendix C, "Gateway Initialization Parameters" for more information about the
This model discards the Oracle user name and password. The authorizations granted to the effective user ID of the gateway by the queue manager are the only associations an Oracle application has. For example, if the gateway user ID is granted permission to open or read messages, or place messages on a queue, then all Oracle applications that access the gateway can request those operations.
The effective user ID is determined by how the gateway runs:
If the gateway runs as an MQI client application, then the user ID is determined by the MQI channel definition.
See Also:Refer to IBM publications for more information about channel definitions
If the gateway runs as an MQI server application, then the effective user ID of the gateway is the user account that starts the Oracle Net listener and has authorization to all the WebSphere MQ objects that the Oracle application wants to access. Refer to Authorization for WebSphere MQ Objects for more information.
Oracle does not recommend using the relaxed model, unless your application has minimal security requirements.
This model uses the Oracle user ID and password provided in the
CREATE DATABASE LINK statement when a database link is created, or the current Oracle user ID and password if none was provided with the
CREATE DATABASE LINK statement.
The Oracle user ID:
Must match a user account for the system that runs the gateway and for the system that runs the WebSphere MQ queue manager
Must have authorization for all the accessed WebSphere MQ objects. Refer to Authorization for WebSphere MQ Objects for more information.
The authorization process to verify the Oracle user ID and password varies, depending on how the gateway runs.
If the gateway runs as a WebSphere MQ server application, then the authorization process checks the user ID and password against the local or network password file. If they match, then the gateway performs a
SET-UID for the user ID and continues to run under this user ID. Further, WebSphere MQ authorization checks happen for this user ID.
If the gateway runs as a WebSphere MQ client application, then the authorization process checks the user ID and password against the local or network password file. If they match, then the
MQ_PASSWORD WebSphere MQ environment variables are set to the values of the user ID and password. If the channel definition specifies the
MCAUSER WebSphere MQ environment variable as blank characters, then WebSphere MQ authorization checks are performed for the user ID.
MCAUSER is set, not set, or security exits are defined for the MQI channel, then these override the gateway efforts.
See Also:Refer to IBM publications for more information about WebSphere MQ environment variables
The effective user ID for the relaxed model and the Oracle user ID for the strict model require the WebSphere MQ authorizations described in Table 8-1.
|Type of Access||WebSphere MQ Authorization Keywords||Alternate WebSphere MQ Authorization Keywords|
Permission to access the WebSphere MQ queue manager
Permission to send messages to a WebSphere MQ queue
Permission to receive messages from a WebSphere MQ queue
See Also:Refer to IBM publications for more information about WebSphere MQ authorizations
Transactions from an Oracle application that use he gateway and invoke WebSphere MQ message queue operations are managed by the transaction coordinator at the Oracle server where the transaction originates.
When an Oracle distributed database contains a gateway, the gateway must be properly configured to take part in a distributed transaction. The outcome of a distributed transaction involving a gateway should be that all participating sites roll back or commit their parts of the distributed transaction. All participating sites, including gateway sites, that are updated during a distributed transaction must be protected against failure and must be able to take part in the two-phase commit mechanism.
A gateway that updates a target system as part of a distributed transaction must be able to take part in the automatic recovery mechanism, which might require that recovery information be recorded in transaction memory at the target system.If a SQL-based gateway is involved in a distributed transaction, then the distributed database must be in a consistent state after the distributed transaction is committed.
A procedural gateway or a SQL-based gateway with the procedural option translates remote procedure calls into target system calls. From the viewpoint of the Oracle transaction model, the gateway is like an Oracle server executing a PL/SQL block containing SQL statements that are used to access an Oracle database.
For a procedural gateway, it is unknown if a target system call alters data. To ensure the consistency of a distributed database, it must be assumed that a procedural gateway updates the target system. Accordingly, all remote procedure calls sent to a procedural gateway take part in a distributed transaction and must be protected by the two-phase commit protocol. For example, you could issue the following SQL*Plus statements:
EXECUTE REMOTE_PROC@FACTORY; INSERT INTO DEBIT@FINANCE ROLLBACK;
In this example,
REMOTE_PROC is a remote procedure call to access a procedural gateway,
DEBIT is an Oracle table residing in an Oracle database, and
FINANCE are database links used to access the remote sites.
When gateways are involved in a distributed transaction, the transaction capabilities of the non-Oracle data source determine whether the data source can participate in two-phase commit operations or distributed transactions.
Depending on the capabilities of the non-Oracle data source, transactions can be classified into one of the following transaction types:
|Read-only||During a distributed transaction, the gateway provides read-only access to the data source, so the gateway can only be queried. Read-only transactions are used for target systems that use the presumed-commit model or do not support rollback mechanisms.|
|Single-site||During a distributed transaction, the target system is read-only (other sites can be updated) or the only site that can be updated (can participate in remote transactions). Single-site is used for target systems that support rollback, commit, and presumed-abort, but cannot prepare or commit-confirm because they have no distributed transaction memory. Transaction memory is the ability to remember what happened during and after a distributed transaction.|
|Commit-confirm||The gateway is a partial partner in the Oracle transaction mode. During a distributed transaction in which it is updated, the gateway must be the commit point site. Commit-confirm is used for target systems that support rollback, commit, presumed-abort, and commit-confirm, but do not support prepare. The commit-confirm capability requires distributed transaction memory.|
|Two-phase commit||The gateway is a partial partner in the Oracle transaction model. During a distributed transaction, the gateway cannot be the commit point site.Two-phase commit is used for target systems that support rollback, commit, presumed-abort, and prepare, but do not support commit-confirm, because they have no distributed transaction memory.|
|Two-phase commit-commit confirm||The gateway is a full partner in the Oracle transaction model. During a distributed transaction, the gateway can be the commit point site, depending on the commit point strength defined in the gateway initialization file.This transaction type is used for target systems that support a full two-phased commit transaction model. That is, the target system supports rollback, commit, presumed-abort, prepare, and commit-confirm.|
Transactions from an Oracle application (that invoke WebSphere MQ message queue operations and that are using the gateway) are managed by the Oracle transaction coordinator at the Oracle server where the transaction originates. The procedural gateway for WebSphere MQ provides the following transaction types:
Single-site transactions are supported for all WebSphere MQ environments and platforms. Single-Site means that the gateway can participate in a transaction only when queues belonging to the same WebSphere MQ queue manager are updated. An Oracle application can select, but not update, data on any Oracle database within the same transaction that sends a message to, or receives a message from, a WebSphere MQ queue. To update objects in the Oracle database, the transaction involving the WebSphere MQ queue should first be committed or rolled back.
This default mode of the gateway is implemented using WebSphere MQ single-phase, where the queue manager acts as the synchronizing point coordinator.
Commit-Confirm transactions are an enhanced form of single-site transaction and is supported for all WebSphere MQ environments and platforms. Commit-confirm means that the gateway can participate in transactions when queues belonging to the same WebSphere MQ queue manager are updated and, at the same time, any number of Oracle databases can be updated. Only one gateway with the commit-confirm model can join the distributed transaction because the gateway operates as the focal point of the transaction. To apply changes to queues of more than one queue manager, updates applied to one queue manager need to be committed before a new transaction is started for the next queue manager.
As with single-site transactions, commit-confirm transactions are implemented using WebSphere MQ single-phase, but it requires a dedicated recovery queue at the queue manager to log the transaction ID. At commit time, the gateway places a message in this queue with the message ID set to the Oracle transaction ID. After the gateway calls the queue manager to commit the transaction, the extra message on the transaction log queue becomes part of the overall transaction. This makes it possible to determine the outcome of the transaction in case of system failure, enabling the gateway to recover a failed transaction. When a transaction completes successfully, the gateway removes the associated message from the queue.
The WebSphere MQ administrator must create a reserved queue at the queue manager. The name of this queue is specified in the gateway initialization file with the
TRANSACTION_LOG_QUEUE parameter. All Oracle users that access WebSphere MQ through the gateway should have full authorization for this queue. The transaction log queue is reserved for transaction logging only and must not be used, accessed, or updated other than by the gateway. When a system failure occurs, the Oracle recovery process checks the transaction log queue to determine the recovery strategy.
Two gateway initialization parameters,
TRANSACTION_RECOVERY_PASSWORD, are set in the gateway initialization file to specify the user ID and password for recovery purposes. When set, the gateway uses this user ID and password combination for recovery work. The recovery user ID should have full authorization for the transaction log queue.
Refer to Appendix C, "Gateway Initialization Parameters" for more information about configuring the gateway for commit-confirm transactions.
This section includes messages, error codes, gateway tracing, and gateway operations.
The gateway architecture includes a number of components. Any of these components can detect and report an error condition while processing PL/SQL code. An error condition can be complex, involving error codes and supporting data from multiple components. In all cases, the Oracle application receives a single Oracle error code on which to act.
Error conditions are represented in the following ways:
Messages from the Oracle integrating server are in the format ORA-xxxxx or PLS-xxxxx, where xxxxx is a code number. ORA-xxxxx is followed by text explaining the error code.
PLS-00306: wrong number or types of arguments in call to 'MQOPEN' ORA-06550: line7, column 3: PL/SQL: Statement ignored
See Also:Refer to the Oracle Database Error Messages for explanations of these errors.
When possible, a WebSphere MQ error code is converted to an Oracle error code. If that is not possible, then the Oracle error ORA-29400 with the corresponding WebSphere MQ error code is returned. Refer to Common Error Codes for more information.
ORA-29400: data cartridge error MQI MQCONNX failed. completion code=2, reason code=2058
Note:Because the Oracle integrating server distinguishes only between a successful or failed outcome of all user operations, MQI calls that return a warning are reported as a successful operation.
Gateway messages have the following format:
nnnn is an Oracle error number.
error_message_text is the text of the message associated with the error.
gateway_message_line is additional message text generated by the gateway.
The error conditions that are described in this section are common error conditions that an application might receive while using the gateway. However, this section does not cover all error situations.
2035, then do the following:
If the gateway is configured for the relaxed security model, then use the WebSphere MQ administrative command interface to grant sufficient message privileges to the user account that started the Oracle Net listener. These privileges enable the user to send and receive messages for the specified WebSphere MQ queue.
If the gateway is configured for the strict security model, use the WebSphere MQ administrative command interface to grant message privileges to the user name specified in the
CREATE DATABASE LINK statement. If no user name was specified in the
CREATE DATABASE LINK statement, then the privileges are granted to the current Oracle user ID. These privileges enable the user to send and receive messages for the specified WebSphere MQ queue.
MQOPEN, and if
2085, then verify that the queue that is specified on the WebSphere MQ profile exists at the WebSphere MQ queue manager that you are trying to access and that the queue name is correctly spelled in the correct letter case.
See Also:Refer to IBM publications for more information on
The gateway has a trace feature for testing and debugging purposes. The trace feature collects information about the gateway running environment, MQI calls, and parameter values of the MQI calls. The amount of trace data to collect is based on the tracing level selected with the
TRACE_LEVEL parameter. Refer to Appendix C, "Gateway Initialization Parameters" for more information about enabling tracing.
Note:Do not enable tracing when your application is running in a production environment because it reduces gateway performance.
This is a gateway initialization parameter.
LOG_DESTINATION = log_file
LOG_DESTINATION specifies the file name or directory where the gateway writes logging information. When
log_file already exists, logging information is written to the end of file.
If you do not specify
LOG_DESTINATION, then the default log file is created each time that the gateway starts up.
If your application cannot connect to the gateway, then rerun the application with the gateway trace feature enabled. If no trace information is written to the log file specified by
LOG_DESTINATION, or if the log file is not created at all, then verify that:
The Oracle Net configuration for the gateway and the Oracle integrating server is set up properly (refer to "Configuring Oracle Net for the Gateway")
A database link exist between the Oracle integrating server and the gateway ("Administering the Database Links Alias Library")
If the Oracle Net configuration and database link are set up correctly, then check the operation of the gateway with the
Change directory to the gateway sample directory by entering:
> cd \pg4mq\sample
Specify the database link name that you created for the gateway. To do this, replace the characters
dblink is the name you chose when the database link was created.
Replace the characters
YOUR_QUEUE_NAME with a valid WebSphere MQ queue name.
Using SQL*Plus, connect to your Oracle integrating server as a valid user.
test.sql, a script that sends and retrieves a message from a WebSphere MQ queue. A successful completion displays the following output:
SQL> @test.sql message put on queue = 10203040506070809000 MQPUT: CorrelId length = 24 MQPUT: MsgId length = 24 MQPUT returned with reason code 0 MQGET returned with reason code 0 message read back = 10203040506070809000
An unsuccessful test displays the following output:
SQL> @test.sql message put on queue = 10203040506070809000 Error: Procedural Gateway for WebSphere MQ verification script failed. ORA-29400: data cartridge error MQI MQOPEN failed. completion code=2, reason code=2085