Client Quick Installation Guide
10g Release 2 (10.2) for Linux Itanium
This guide describes how to quickly install Oracle Database Client on Linux x86-64 systems. It includes information about the following:
Note:This guide describes how to install Oracle Client on a system that does not have any Oracle software installed on it. If there is an existing Oracle software installation on this system, then refer to Oracle Database Client Installation Guide for Linux x86-64 for more detailed installation instructions.
This guide describes how to complete a default installation of Oracle Database Client on a system that does not have any Oracle software installed on it. It describes how to install one of the following installation types:
Administrator: Enables applications to connect to an Oracle Database instance on the local system or on a remote system. It also provides tools that enable you to administer Oracle Database.
Runtime: Enables applications to connect to an Oracle Database instance on the local system or on a remote system.
Instant Client: Enables you to install only the shared libraries required by Oracle Call Interface (OCI), Oracle C++ Call Interface (OCCI), Pro*C, or Java database connectivity (JDBC) OCI applications. This installation type requires much less disk space as compared to the other Oracle Database Client installation types.
See Also:Oracle Call Interface Programmer's Guide for more information about the Instant Client feature
This guide does not describe how to install the Custom installation type.
For more detailed information about installing Oracle Database Client, refer to Oracle Database Client Installation Guide for Linux x86-64.
This guide is available on the product disc. To access it, use a Web browser to open the
welcome.htm file located in the top-level directory of the installation media, and then select the Documentation tab.
Before you install Oracle Database Client, you must complete several tasks as the
root user. To log in as the
root user, complete one of the following procedures:
Note:You must install the software from an X Window System workstation, an X terminal, or a PC or other system with X server software installed.
If you are installing the software from an X Window System workstation or X terminal, then:
Start a local terminal session, for example, an X terminal (
If you are not installing the software on the local system, then enter the following command to enable the remote host to display X applications on the local X server:
$ xhost fully_qualified_remote_host_name
$ xhost somehost.us.acme.com
If you are not installing the software on the local system, then use the
telnet command to connect to the system where you want to install the software:
$ telnet fully_qualified_remote_host_name
If you are not logged in as the
root user, then enter the following command to switch user to
$ su - root password: #
If you are installing the software from a PC or other system with X server software installed, then:
Note:If necessary, refer to your X server documentation for more information about completing this procedure. Depending on the X server software that you are using, you may need to complete the tasks in a different order.
Start the X server software.
Configure the security settings of the X server software to permit remote hosts to display X applications on the local system.
Connect to the remote system where you want to install the software and start a terminal session on that system, for example, an X terminal (
If you are not logged in as the
root user on the remote system, then enter the following command to switch user to
$ su - root password: #
The system must meet the following minimum hardware requirements:
256 MB of physical RAM
The following table describes the relationship between installed RAM and the configured swap space requirement.
|Up to 256 MB||3 times the size of RAM|
|Between 257 MB and 512 MB||2 times the size of RAM|
|Between 513 MB and 726 MB||1.5 times the size of RAM|
|More than 726 MB||0.75 times the size of RAM|
The minimum client installation
TMP space required is 115 MB. The minimum disk space requirement in the
/tmp directory depends on the installation type you have selected. The following table lists the minimum disk space requirements for the
/tmp directory in each type of installation.
|Installation Type||Disk Space Required for the /tmp Directory (MB)|
|Custom (all components selected)||765|
Between 34 MB and 820 MB of disk space for the Oracle software, depending on the installation type
To ensure that the system meets these requirements, follow these steps:
To determine the physical RAM size, enter the following command:
# grep MemTotal /proc/meminfo
If the size of the physical RAM installed in the system is less than the specified value, then you must install more memory before continuing.
To determine the size of the configured swap space, enter the following command:
# grep SwapTotal /proc/meminfo
If necessary, refer to your operating system documentation for information about how to configure additional swap space.
To determine the amount of free disk space available in the
/tmp directory, enter the following command:
# df -k /tmp
If there is less than 400 MB of disk space available in the
/tmp directory, then complete one of the following steps:
Delete unnecessary files from the
/tmp directory to meet the disk space requirement.
TMPDIR environment variables when setting the
oracle user's environment (described later).
Extend the file system that contains the
/tmp directory. If necessary, contact your system administrator for information about extending file systems.
To determine the amount of free disk space available on the system, enter the following command:
# df -k
The following table shows the approximate disk space requirements for software files for each installation type.
|Installation Type||Requirement for Software Files|
|Instant Client||120 MB|
|Custom (maximum)||1.11 GB|
Note:If you want to configure only the Instant Client Light component of Instant Client, then you need 34 MB of disk space to store the related files.
To determine whether the system architecture can run the software, enter the following command:
# grep "model name" /proc/cpuinfo
This command displays the processor type. Verify that the processor architecture matches the Oracle software release that you want to install. If you do not see the expected output, then you cannot install the software on this system.
The system must meet the following minimum software requirements.
|Operating system||One of the following operating system versions:
|Kernel version||The system must be running the following kernel version (or a later version):
Red Hat Enterprise Linux 3.0:
Note: This is the default kernel version.
Red Hat Enterprise Linux 4.0:
SUSE Linux Enterprise Server 8.0:
SUSE Linux Enterprise Server 9.0:
|Packages for Red Hat Enterprise Linux 3.0||The following packages (or later versions) must be installed:
make-3.79.1-17 control-center-126.96.36.199-13 gcc-3.2.3-47 gcc-c++-3.2.3-47 gdb-6.1post-1.20040607.52 glibc-2.3.2-95.30 glibc-common-2.3.2-95.30 glibc-devel-2.3.2-95.30 glibc-devel-2.3.2-95.20 (32 bit) compat-db-4.0.14-5.1 compat-gcc-7.3-2.96.128 compat-gcc-c++-7.3-2.96.128 compat-libstdc++-7.3-2.96.128 compat-libstdc++-devel-7.3-2.96.128 gnome-libs-188.8.131.52.90-34.2 (32 bit) libstdc++-3.2.3-47 libstdc++-devel-3.2.3-47 openmotif-2.2.3-3.RHEL3 sysstat-5.0.5-5.rhel3 setarch-1.3-1 libaio-0.3.96-3 libaio-devel-0.3.96-3
|Packages for Red Hat Enterprise Linux 4.0||The following packages (or later versions) must be installed:
binutils-184.108.40.206.2-10.EL4 compat-db-4.1.25-9 control-center-2.8.0-12 gcc-3.4.3-9.EL4 gcc-c++-3.4.3-9.EL4 glibc-2.3.4-2 glibc-common-2.3.4-2 gnome-libs-220.127.116.11.90-44.1 libstdc++-3.4.3-9.EL4 libstdc++-devel-3.4.3-9.EL4 make-3.80-5 pdksh-5.2.14-30 sysstat-5.0.5-1 xscreensaver-4.18-5.rhel4.2
|Packages for SUSE Linux Enterprise Server 9||The following packages (or later versions) must be installed:
gcc-3.3.3 gcc-c++-3.3.3 glibc-2.3.3 libaio-0.3.102-1.2ia64 libaio-devel-0.3.102-1.2ia64 make-3.80
|PL/SQL native compilation, Pro*C/C++, Oracle Call Interface, Oracle C++ Call Interface, Oracle XML Developer's Kit (XDK)||Intel C++ Compiler 8.1 or later and the version of GNU C and C++ compilers listed previously for the distribution are supported for use with these products.
Intel C++ Compiler v8.1 or later is supported. However, it is not required for installation. On Red Hat Enterprise Linux 3, OCCI is supported with version 3.2 of the GNU C++ compiler. This is the default compiler version. OCCI is also supported with Intel Compiler v8.1 with gcc 3.2.3 standard template libraries.
Oracle XML Developer's Kit is not supported with GCC on Red Hat Linux 4.0. It is supported only with Intel C++ Compiler (ICC).
On Red Hat Enterprise Linux 4.0, Oracle C++ Call Interface (OCCI) does not support GCC 3.4.3. To use OCCI on Red Hat Enterprise Linux 4.0, you need to install GCC 3.2.3.
|Oracle JDBC/OCI Drivers||You can use the following optional JDK version with the Oracle JDBC/OCI drivers; however, it is not required for the installation:
See Also:If you plan to use GNU Compiler Collection as the primary compiler, then refer to Oracle Database Installation Guide for Linux Itanium for instructions on configuring the primary compiler.
To ensure that the system meets these requirements:
To determine which version of the operating system is installed, enter the following command:
# cat /etc/issue
Note:Only the distributions and versions listed earlier in this section are supported. Do not install the software on other versions of Linux.
To determine whether the required kernel is installed, enter the following command:
# uname -r
The following is sample output obtained by running this command on a Red Hat Enterprise Linux 3.0 system:
If the kernel version does not meet the requirement specified earlier in this section, then contact your operating system vendor for information about obtaining and installing kernel updates.
To determine whether the required packages are installed, enter commands similar to the following:
# rpm -q package_name
If a package is not installed, or if the version is lower than the required version, then install it from your Linux distribution media or download the required package from your Linux vendor's Web site.
The following local operating system group and user must exist on the system:
The Oracle Inventory group (
The Oracle software owner (
To determine if this group and user already exist, and if required, to create them, follow these steps:
To determine if the
oinstall group exists, enter the following command:
# more var/opt/oracle/oraInst.loc
If the output of this command shows the
oinstall group name, then the group already exists.
oraInst.loc file exists, then the output from this command is similar to the following:
inst_group parameter shows the name of the Oracle Inventory group (
If necessary, enter the following command to create the
# /usr/sbin/groupadd oinstall
To determine whether the
oracle user exists and belongs to the correct groups, enter the following command:
# id oracle
oracle user exists, then this command displays information about the groups to which the user belongs. The output should be similar to the following, indicating that
oinstall is the primary group:
uid=440(oracle) gid=200(oinstall) groups=201(dba),202(oper)
If necessary, complete one of the following actions:
oracle user exists, but its primary group is not
oinstall, then enter a command similar to the following, where the
-g option specifies
oinstall as the primary group and the
-G option specifies any existing groups to which the
oracle user belongs:
# /usr/sbin/usermod -g oinstall -G dba oracle
oracle user does not exist, then enter the following command to create it:
# /usr/sbin/useradd -g oinstall [-G dba] oracle
This command creates the
oracle user and specifies:
oinstall as the primary group
dba as an optional secondary group
Enter the following command to set the password of the
# passwd oracle
Note:You need not perform this procedure if an Oracle base directory already exists on the system. If you determine that the oinstall group exists, then, typically, the Oracle base directory is the parent directory of the Oracle Inventory directory.
To create the Oracle base directory:
Enter the following command to display information about all mounted file systems:
# df -k
This command displays information about all the file systems mounted on the system, including:
The physical device name
The total amount, used amount, and available amount of disk space
The mount point directory for that file system
From the display, identify either one or two file systems that meet the disk space requirements mentioned earlier in this section.
Note the name of the mount point directory for each file system that you identified.
Enter commands similar to the following to create the recommended subdirectories in the mount point directory that you identified and set the appropriate owner, group, and permissions on them:
# mkdir -p /mount_point/app/oracle_sw_owner # chown -R oracle:oinstall /mount_point/app/oracle_sw_owner # chmod -R 775 /mount_point/app/oracle_sw_owner
For example, if the mount point you identify is
oracle is the user name of the Oracle software owner, then the recommended Oracle base directory path is as follows:
When you configure the
oracle user's environment, set the
ORACLE_BASE environment variable to specify the Oracle base directory that you have created.
You run Oracle Universal Installer from the
oracle account. However, before you start Oracle Universal Installer, you must configure the environment of the
oracle user. To configure the environment, you must:
Set the default file mode creation mask (umask) to 022 in the shell startup file.
DISPLAY environment variable.
To set the
oracle user's environment:
Start a new terminal session, for example, an X terminal (
Enter the following command to ensure that X Window applications can display on this system:
$ xhost fully_qualified_remote_host_name
Complete one of the following steps:
If the terminal session is not connected to the system where you want to install the software, then log in to that system as the
If the terminal session is connected to the system where you want to install the software, then switch user to
$ su - oracle
To determine the default shell for the
oracle user, enter the following command:
$ echo $SHELL
oracle user's shell startup file in any text editor:
Note:On Red Hat Linux,
.bash_profileis the user startup file for the Bash shell.
Bourne shell (
sh), Bash shell (
bash), or Korn shell (
$ vi .bash_profile
C shell (
% vi .login
Enter or edit the following line in the shell startup file, specifying a value of 022 for the default file mode creation mask:
ORACLE_BASE environment variable is set in the file, then remove the corresponding lines from the file.
Save the file, and exit from the editor.
To run the shell startup script, enter the following command:
$ . ./.bash_profile
Bourne or Korn shell:
$ . ./.profile
% source ./.login
If you are not installing the software on the local system, then enter a command similar to the following to direct X applications to display on the local system:
Bourne, Bash, or Korn shell:
$ DISPLAY=local_host:0.0 ; export DISPLAY
% setenv DISPLAY local_host:0.0
In this example,
local_host is the host name or IP address of the system that you want to use to display Oracle Universal Installer (your workstation or PC).
If you determined that the
/tmp directory had insufficient free disk space when checking the hardware requirements, then identify a file system with the required amount of free space and set the
TMPDIR environment variables as follows:
df -k command to identify a suitable file system with sufficient free space.
If necessary, enter commands similar to the following to create a temporary directory on the file system that you identified, and set the appropriate permissions on the directory:
$ su - root # mkdir /mount_point/tmp # chmod a+wr /mount_point/tmp # exit
Enter commands similar to the following to set the
TMPDIR environment variables:
Bourne, Bash, or Korn shell:
$ TMP=/mount_point/tmp $ TMPDIR=/mount_point/tmp $ export TMP TMPDIR
% setenv TMP /mount_point/tmp % setenv TMPDIR /mount_point/tmp
Enter the following commands to ensure that the
TNS_ADMIN environment variables are not set:
Bourne, Bash, or Korn shell:
$ unset ORACLE_HOME $ unset TNS_ADMIN
% unsetenv ORACLE_HOME % unsetenv TNS_ADMIN
To verify that the environment has been set correctly, enter the following commands:
$ umask $ env | more
Verify that the
umask command displays a value of
0022 and the environment variables that you set in this section have the correct values.
On most Linux systems, the product disc mounts automatically when you insert it into the drive. If the disc does not mount automatically, follow these steps to mount it:
Switch user to root:
$ su - root
If necessary, enter a command similar to the following to eject the currently mounted disc, then remove it from the drive:
# eject /mnt/dvd
# eject /media/dvd
In these examples,
/media/dvd are the mount point directories for the disc drive.
Insert the disc into the disc drive.
To verify that the disc mounted automatically, enter a command similar to the following:
$ ls /mnt/dvd
$ ls /media/dvd
If this command fails to display the contents of the disc, then enter a command similar to the following:
# mount -t iso9660 /dev/dvd /mnt/dvd
# mount -t iso9660 /dev/dvd /media/dvd
In these examples,
/media/dvd are the mount point directories for the disc drive.
After configuring the
oracle user's environment, start Oracle Universal Installer and install the Oracle software as follows:
To start Oracle Universal Installer, enter the following command:
If Oracle Universal Installer does not start, then refer to Oracle Database Client Installation Guide for Linux x86-64 for information about how to troubleshoot X display problems.
The following table describes the recommended action for each Oracle Universal Installer screen. Use the following guidelines to complete the installation:
If you need more assistance, or if you want to choose an option that is not a default, then click Help for additional information.
If you encounter errors while installing or linking the software, then refer to for information about troubleshooting.
Note:If you have completed the tasks listed previously, then you can complete the installation by choosing the default values on most screens.
|Select Installation Type||Select InstantClient, Administrator, or Runtime. Then, click Next.|
|Specify Home Details||Specify the name and directory path of the Oracle home.|
|Product-Specific Prerequisite Checks||Verify that all of the prerequisite checks have succeeded, and then click Next.
Oracle Universal Installer checks the system to verify that it is configured correctly to run Oracle software. If you have completed all of the preinstallation steps in this guide, then all of the checks should pass.
If a check fails, then review the cause of the failure listed for that check on the screen. If possible, rectify the problem and rerun the check. Alternatively, if you are satisfied that your system meets the requirements, then you can select the check box for the failed check to manually verify the requirement.
|Summary||Review the information displayed on this screen, and then click Install.|
|Install||This screen displays status information while the product is being installed.|
|Configuration Assistants||This screen is displayed only if you select Administrator or Runtime on the Select Installation type screen.
This screen displays status information for the Oracle Net Configuration Assistant that configures Oracle Net. When the message is displayed at the end of this process, click OK to continue.
|Oracle Net Configuration Assistant: Welcome||This screen is displayed only if you select Administrator or Runtime on the Select Installation Type screen.
Review the information on this screen, and then click Next.
The Oracle Net Configuration Assistant configures the easy connect naming method. For more information about this naming method, click Help.
|Oracle Net Configuration Assistant: Done||Click Finish to continue.|
|Execute Configuration Scripts||When prompted, read the instructions and then run the script mentioned on this screen. Click OK to continue.|
|End of Installation||To exit from Oracle Universal Installer, click Exit, and then click Yes.|
After you have successfully installed Oracle Client, refer to Oracle Database Client Installation Guide for Linux x86-64 for information about required and optional postnstallation steps.
Our goal is to make Oracle products, services, and supporting documentation accessible, with good usability, to the disabled community. To that end, our documentation includes features that make information available to users of assistive technology. This documentation is available in HTML format, and contains markup to facilitate access by the disabled community. Accessibility standards will continue to evolve over time, and Oracle is actively engaged with other market-leading technology vendors to address technical obstacles so that our documentation can be accessible to all of our customers. For more information, visit the Oracle Accessibility Program Web site at
Screen readers may not always correctly read the code examples in this document. The conventions for writing code require that closing braces should appear on an otherwise empty line; however, some screen readers may not always read a line of text that consists solely of a bracket or brace.
This documentation may contain links to Web sites of other companies or organizations that Oracle does not own or control. Oracle neither evaluates nor makes any representations regarding the accessibility of these Web sites.
Oracle provides dedicated Text Telephone (TTY) access to Oracle Support Services within the United States of America 24 hours a day, seven days a week. For TTY support, call 800.446.2398.
Oracle Database Client Quick Installation Guide, 10g Release 2 (10.2) for Linux Itanium
Copyright © 2005, Oracle. All rights reserved.
The Programs (which include both the software and documentation) contain proprietary information; they are provided under a license agreement containing restrictions on use and disclosure and are also protected by copyright, patent, and other intellectual and industrial property laws. Reverse engineering, disassembly, or decompilation of the Programs, except to the extent required to obtain interoperability with other independently created software or as specified by law, is prohibited.
The information contained in this document is subject to change without notice. If you find any problems in the documentation, please report them to us in writing. This document is not warranted to be error-free. Except as may be expressly permitted in your license agreement for these Programs, no part of these Programs may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose.
If the Programs are delivered to the United States Government or anyone licensing or using the Programs on behalf of the United States Government, the following notice is applicable:
U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the Programs, including documentation and technical data, shall be subject to the licensing restrictions set forth in the applicable Oracle license agreement, and, to the extent applicable, the additional rights set forth in FAR 52.227-19, Commercial Computer Software—Restricted Rights (June 1987). Oracle Corporation, 500 Oracle Parkway, Redwood City, CA 94065
The Programs are not intended for use in any nuclear, aviation, mass transit, medical, or other inherently dangerous applications. It shall be the licensee's responsibility to take all appropriate fail-safe, backup, redundancy and other measures to ensure the safe use of such applications if the Programs are used for such purposes, and we disclaim liability for any damages caused by such use of the Programs.
Oracle, JD Edwards, PeopleSoft, and Retek are registered trademarks of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.
The Programs may provide links to Web sites and access to content, products, and services from third parties. Oracle is not responsible for the availability of, or any content provided on, third-party Web sites. You bear all risks associated with the use of such content. If you choose to purchase any products or services from a third party, the relationship is directly between you and the third party. Oracle is not responsible for: (a) the quality of third-party products or services; or (b) fulfilling any of the terms of the agreement with the third party, including delivery of products or services and warranty obligations related to purchased products or services. Oracle is not responsible for any loss or damage of any sort that you may incur from dealing with any third party.