|Oracle® Database SQL Reference
10g Release 2 (10.2)
|PDF · Mobi · ePub|
Caution:Oracle recommends that you perform a full backup of all files in the database before using this statement. For more information, see Oracle Database Backup and Recovery Basics.
All copies of your existing control files have been lost through media failure.
You want to change the name of the database.
You want to change the maximum number of redo log file groups, redo log file members, archived redo log files, datafiles, or instances that can concurrently have the database mounted and open.
An alternative to the
CONTROLFILE statement is
TRACE, which generates a SQL script in the trace file to re-create the controlfile. If your database contains any read-only or temporary tablespaces, then that SQL script will also contain all the necessary SQL statements to add those files back into the database. Please refer to the
DATABASE "BACKUP CONTROLFILE Clause" for information creating a script based on an existing database controlfile.
To create a control file, you must have the
SYSDBA system privilege.
The database must not be mounted by any instance. After successfully creating the control file, Oracle mounts the database in the mode specified by the
CLUSTER_DATABASE parameter. The DBA must then perform media recovery before opening the database. If you are using the database with Real Application Clusters, you must then shut down and remount the database in
SHARED mode (by setting the value of the
CLUSTER_DATABASE initialization parameter to
TRUE) before other instances can start up.
When you issue a
CONTROLFILE statement, Oracle Database creates a new control file based on the information you specify in the statement. The control file resides in the location specified in the
CONTROL_FILES initialization parameter. If that parameter does not have a value, then the database creates an Oracle-managed control file in the default control file destination, which is one of the following (in order of precedence):
One or more control files as specified in the
n initialization parameter. The file in the first directory is the primary control file. When
n is specified, the database does not create a control file in
DB_CREATE_FILE_DEST or in
DB_RECOVERY_FILE_DEST (the flash recovery area).
If no value is specified for
n, but values are set for both the
DB_RECOVERY_FILE_DEST, then the database creates one control file in each location. The location specified in
DB_CREATE_FILE_DEST is the primary control file.
If a value is specified only for
DB_CREATE_FILE_DEST, then the database creates one control file in that location.
If a value is specified only for
DB_RECOVERY_FILE_DEST, then the database creates one control file in that location.
If no values are set for any of these parameters, then the database creates a control file in the default location for the operating system on which the database is running. This control file is not an Oracle-managed file.
If you omit any clauses, Oracle Database uses the default values rather than the values for the previous control file. After successfully creating the control file, Oracle Database mounts the database in the mode specified by the initialization parameter
CLUSTER_DATABASE. If that parameter is not set, the default value is
FALSE, and the database is mounted in
EXCLUSIVE mode. Oracle recommends that you then shut down the instance and take a full backup of all files in the database.
REUSE to indicate that existing control files identified by the initialization parameter
CONTROL_FILES can be reused, overwriting any information they may currently contain. If you omit this clause and any of these control files already exists, then Oracle Database returns an error.
Specify the name of the database. The value of this parameter must be the existing database name established by the previous
DATABASE statement or
DATABASE to change the name of the database. The name of a database can be as long as eight bytes.
logfile_clause to specify the redo log files for your database. You must list all members of all redo log file groups.
Use the redo_log_file_spec form of
file_specification (see file_specification) to list regular redo log files in an operating system file system or to list Automatic Storage Management disk group redo log files. When using a form of
ASM_filename, you cannot specify the
autoextend_clause of the
If you specify
RESETLOGS in this clause, then you must use one of the file creation forms of
ASM_filename. If you specify
NORESETLOGS, you must specify one of the reference forms of
See Also:ASM_filename for information on the different forms of syntax and Oracle Database Administrator's Guide for general information about using Automatic Storage Management
If you omit this clause, then the database creates logfiles using system default values. In addition, if either the
DB_CREATE_FILE_DEST initialization parameter has been set, and if you have specified
RESETLOGS, then the database creates two logs in the default logfile destination specified in the
DB_CREATE_ONLINE_LOG_DEST_n parameter, and if it is not set, then in the
See Also:file_specification for a full description of this clause
RESETLOGS if you want Oracle Database to ignore the contents of the files listed in the
LOGFILE clause. These files do not have to exist. Each
redo_log_file_spec in the
LOGFILE clause must specify the
SIZE parameter. The database assigns all online redo log file groups to thread 1 and enables this thread for public use by any instance. After using this clause, you must open the database using the
RESETLOGS clause of the
NORESETLOGS if you want Oracle Database to use all files in the
LOGFILE clause as they were when the database was last open. These files must exist and must be the current online redo log files rather than restored backups. The database reassigns the redo log file groups to the threads to which they were previously assigned and reenables the threads as they were previously enabled.
Specify the datafiles of the database. You must list all datafiles. These files must all exist, although they may be restored backups that require media recovery.
Do not include in the
DATAFILE clause any datafiles in read-only tablespaces. You can add these types of files to the database later. Also, do not include in this clause any temporary datafiles (tempfiles).
Use the datafile_tempfile_spec form of
file_specification (see file_specification) to list regular datafiles and tempfiles in an operating system file system or to list Automatic Storage Management disk group files. When using a form of
ASM_filename, you must use one of the reference forms of
ASM_filename. Please refer to ASM_filename for information on the different forms of syntax.
See Also:Oracle Database Administrator's Guide for general information about using Automatic Storage Management
Specify the maximum number of online redo log file groups that can ever be created for the database. Oracle Database uses this value to determine how much space to allocate in the control file for the names of redo log files. The default and maximum values depend on your operating system. The value that you specify should not be less than the greatest
GROUP value for any redo log file group.
Specify the maximum number of members, or identical copies, for a redo log file group. Oracle Database uses this value to determine how much space to allocate in the control file for the names of redo log files. The minimum value is 1. The maximum and default values depend on your operating system.
This parameter is useful only if you are using Oracle Database in archivelog mode with Real Application Clusters. Specify the maximum number of archived redo log file groups for automatic media recovery of Real Application Clusters. The database uses this value to determine how much space to allocate in the control file for the names of archived redo log files. The minimum value is 0. The default value is a multiple of the
MAXINSTANCES value and depends on your operating system. The maximum value is limited only by the maximum size of the control file.
Specify the initial sizing of the datafiles section of the control file at
CONTROLFILE time. An attempt to add a file whose number is greater than
MAXDATAFILES, but less than or equal to
DB_FILES, causes the control file to expand automatically so that the datafiles section can accommodate more files.
The number of datafiles accessible to your instance is also limited by the initialization parameter
Specify the maximum number of instances that can simultaneously have the database mounted and open. This value takes precedence over the value of the initialization parameter
INSTANCES. The minimum value is 1. The maximum and default values depend on your operating system.
ARCHIVELOG to archive the contents of redo log files before reusing them. This clause prepares for the possibility of media recovery as well as instance or system failure recovery.
If you omit both the
ARCHIVELOG clause and
NOARCHIVELOG clause, then Oracle Database chooses noarchivelog mode by default. After creating the control file, you can change between archivelog mode and noarchivelog mode with the
Use this clause to put the database into
LOGGING mode after control file creation. When the database is in this mode, Oracle Database logs all changes in the database except changes to temporary tablespaces and temporary segments. This setting takes precedence over and is independent of any
LOGGING settings you specify for individual tablespaces and any
NOLOGGING settings you specify for individual database objects. If you omit this clause, the database will not be in
LOGGING mode after the control file is created.
LOGGINGmode can have performance effects. Please refer to Oracle Database Administrator's Guide for information on when to use this setting.
If you specify a character set, Oracle Database reconstructs character set information in the control file. If media recovery of the database is subsequently required, then this information will be available before the database is open, so that tablespace names can be correctly interpreted during recovery. This clause is required only if you are using a character set other than the default, which depends on your operating system. Oracle Database prints the current database character set to the alert log in
$ORACLE_HOME/log during startup.
If you are re-creating your control file and you are using Recovery Manager for tablespace recovery, and if you specify a different character set from the one stored in the data dictionary, then tablespace recovery will not succeed. However, at database open, the control file character set will be updated with the correct character set from the data dictionary.
You cannot modify the character set of the database with this clause.
See Also:Oracle Database Backup and Recovery Basics for more information on tablespace recovery
Creating a Controlfile: Example This statement re-creates a control file. In this statement, database
demo was created with the WE8DEC character set. The example uses the word
path where you would normally insert the path on your system to the appropriate Oracle Database directories.
STARTUP NOMOUNT CREATE CONTROLFILE REUSE DATABASE "demo" NORESETLOGS NOARCHIVELOG MAXLOGFILES 32 MAXLOGMEMBERS 2 MAXDATAFILES 32 MAXINSTANCES 1 MAXLOGHISTORY 449 LOGFILE GROUP 1 '/path/oracle/dbs/t_log1.f' SIZE 500K, GROUP 2 '/path/oracle/dbs/t_log2.f' SIZE 500K # STANDBY LOGFILE DATAFILE '/path/oracle/dbs/t_db1.f', '/path/oracle/dbs/dbu19i.dbf', '/path/oracle/dbs/tbs_11.f', '/path/oracle/dbs/smundo.dbf', '/path/oracle/dbs/demo.dbf' CHARACTER SET WE8DEC ;