|Oracle® Text Application Developer's Guide
11g Release 1 (11.1)
|PDF · Mobi · ePub|
This chapter discusses how to improve your query and indexing performance. The following topics are covered:
Query optimization with statistics uses the collected statistics on the tables and indexes in a query to select an execution plan that can process the query in the most efficient manner. As a general rule, Oracle recommends that you collect statistics on your base table if you are interested in improving your query performance.
The optimizer attempts to choose the best execution plan based on the following parameters:
The selectivity on the
The selectivity of other predicates in the query
The CPU and I/O costs of processing the
Note:Importing and exporting of statistics on domain indexes, including Oracle Text indexes, is not supported with the
DBMS_STATSpackage. For more information on importing and exporting statistics, see the PL/SQL Packages and Types Reference guide.
The following sections describe how to use statistics with the extensible query optimizer. Optimizing with statistics enables a more accurate estimation of the selectivity and costs of the
CONTAINS predicate and thus a better execution plan.
By default, Oracle Text uses the cost-based optimizer (CBO) to determine the best execution plan for a query. To enable the optimizer to better estimate costs, you can calculate the statistics on the table you query. To do so, enter the following statement:
ANALYZE TABLE <table_name> COMPUTE STATISTICS;
Alternatively, you can estimate the statistics on a sample of the table as follows:
ANALYZE TABLE <table_name> ESTIMATE STATISTICS 1000 ROWS;
ANALYZE TABLE <table_name> ESTIMATE STATISTICS 50 PERCENT;
You can also collect statistics in parallel with the
DBMS_STATS.GATHER_TABLE_STATS('owner', 'table_name', estimate_percent=>50, block_sample=>TRUE, degree=>4) ;
These statements collect statistics on all the objects associated with
table_name, including the table columns and any indexes (b-tree, bitmap, or Text domain) associated with the table.
To re-collect the statistics on a table, enter the
ANALYZE statement as many times as necessary or use the
By collecting statistics on the Text domain index, the cost-based optimizer in Oracle Database is able to perform the following tasks:
Estimate the selectivity of the
Estimate the I/O and CPU costs of using the Text index, that is, the cost of processing the
CONTAINS predicate using the domain index
Estimate the I/O and CPU costs of each invocation of
Knowing the selectivity of a
CONTAINS predicate is useful for queries that contain more than one predicate, such as in structured queries. This way the cost-based optimizer can better decide whether to use the domain index to evaluate
CONTAINS or to apply the
CONTAINS predicate as a post filter.
Consider the following structured query:
select score(1) from tab where contains(txt, 'freedom', 1) > 0 and author = 'King' and year > 1960;
author column is of type
VARCHAR2 and the
year column is of type
NUMBER. Assume that there is a b-tree index on the
Also assume that the structured
author predicate is highly selective with respect to the
CONTAINS predicate and the year predicate. That is, the structured predicate (
author = 'King') returns a much smaller number of rows with respect to the
CONTAINS predicates individually, say 5 rows returned versus 1000 and 1500 rows respectively.
In this situation, Oracle Text can execute this query more efficiently by first doing a b-tree index range scan on the structured predicate (
author = 'King'), followed by a table access by rowid, and then applying the other two predicates to the rows returned from the b-tree table access.
Note:When statistics are not collected for a Text index, the cost-based optimizer assumes low selectivity and index costs for the
After synchronizing your index, you can re-collect statistics on a single index to update the cost estimates.
If your base table has been re-analyzed before the synchronization, it is sufficient to analyze the index after the synchronization without re-analyzing the entire table.
To do so, enter any of the following statements:
ANALYZE INDEX <index_name> COMPUTE STATISTICS; or ANALYZE INDEX <index_name> ESTIMATE STATISTICS SAMPLE 1000 ROWS; or ANALYZE INDEX <index_name> ESTIMATE STATISTICS SAMPLE 50 PERCENT;
By default, Oracle Text optimizes queries for throughput. This results in queries returning all rows in shortest time possible.
However, in many cases, especially in a Web application scenario, queries must be optimized for response time, when you are only interested in obtaining the first few hits of a potentially large hitlist in the shortest time possible.
The following sections describe some ways to optimize
CONTAINS queries for response time:
There are other factors that can influence query response time such as:
Collection of table statistics
Presence of LOB columns in your base table
The number term expansions in your query
When you need the first rows of an
ORDER BY query, Oracle recommends that you use the cost-based
FIRST_ROWS(n)hint is cost-based, Oracle recommends that you collect statistics on your tables before you use this hint. See "Collecting Statistics".
You use the
FIRST_ROWS(n) hint in cases where you want the first number (n) of rows in the shortest possible time. For example, consider the following PL/SQL block that uses a cursor to retrieve the first 10 hits of a query and uses the
FIRST_ROWS(n) hint to optimize the response time:
declare cursor c is select /* FIRST_ROWS(10) */ article_id from articles_tab where contains(article, 'Omophagia')>0 order "by pub_date desc; begin
for i in c loop insert into t_s values(i.pk, i.col); exit when c%rowcount > 11; end loop;
c is a
SELECT statement that returns the rowids that contain the word omophagia in sorted order. The code loops through the cursor to extract the first 10 rows. These rows are stored in the temporary table
FIRST_ROWS hint, Oracle Text instructs the Text index to return rowids in score-sorted order, if possible.
Without the hint, Oracle Text sorts the rowids after the Text index has returned all the rows in unsorted order that satisfy the
CONTAINS predicate. Retrieving the entire result set this way takes time.
Because only the first 10 hits are needed in this query, using the hint results in better performance.
FIRST_ROWS(n)hint when you need only the first few hits of a query. When you need the entire result set, do not use this hint as it might result in poor performance.
You can also optimize for response time using the related
FIRST_ROWS hint. Like
FIRST_ROWS(n), when queries are optimized for response time, Oracle Text returns the first rows in the shortest time possible.
For example, you can use this hint as follows
select /*+ FIRST_ROWS */ pk, score(1), col from ctx_tab where contains(txt_col, 'test', 1) > 0 order by score(1) desc;
However, this hint is only rule-based. This means that Oracle Text always chooses the index which satisfies the
ORDER BY clause. This might result in sub-optimal performance for queries in which the
CONTAINS clause is very selective. In these cases, Oracle recommends that you use the
FIRST_ROWS(n) hint, which is fully cost-based.
Partitioning your data and creating local partitioned indexes can improve your query performance. On a partitioned table, each partition has its own set of index tables. Effectively, there are multiple indexes, but the results from each are combined as necessary to produce the final result set.
You create the
CONTEXT index using the
LOCAL keyword as follows:
CREATE INDEX index_name ON table_name (column_name) INDEXTYPE IS ctxsys.context PARAMETERS ('...') LOCAL
With partitioned tables and indexes, you can improve performance of the following types of queries:
This is a query that restricts the search to a particular range of values on a column that is also the partition key. For example, consider a query on a date range:
SELECT storyid FROM storytab WHERE CONTAINS(story, 'oliver')>0 and pub_date BETWEEN '1-OCT-93' AND '1-NOV-93';
If the date range is quite restrictive, it is very likely that the query can be satisfied by only looking in a single partition.
This is a query that requires only the first
n hits, and that the
ORDER BY clause names the partition key. Consider an
ORDER BY query on a
price column to fetch the first 20 hits such as:
SELECT * FROM (
SELECT itemid FROM item_tab WHERE CONTAINS(item_desc, 'cd player') >0 ORDER BY price) WHERE ROWNUM < 20;
In this example, with the table partitioned by price, the query might only need to get hits from the first partition to satisfy the query.
FIRST_ROWS hint on a local partitioned index might result in poor performance, especially when you order by score. This is because all hits to the query across all partitions must be obtained before the results can be sorted.
You can work around this by using an inline view when you use the
FIRST_ROWS hint. Specifically, you can use the
FIRST_ROWS hint to improve query performance on a local partitioned index under the following conditions:
The text query itself including the order by
SCORE() clause is expressed as an in-line view.
The text query inside the in-line view contains the
The query on the in-line view has
ROWNUM predicate limiting number of rows to fetch from the view.
For example, if you have the following text query and local text index created on a partitioned table doc_tab:
select doc_id, score(1) from doc_tab where contains(doc, 'oracle', 1)>0 order by score(1) desc;
and you are only interested in fetching top 20 rows, you can rewrite the query to
select * from (select /*+ FIRST_ROWS */ doc_id, score(1) from doc_tab where contains(doc, 'oracle', 1)>0 order by score(1) desc) where rownum < 21;
Optimizing a query for throughput returns all hits in the shortest time possible. This is the default behavior.
By default, queries are optimized for throughput under the
ALL_ROWS modes. When queries are optimized for throughput, Oracle Text returns all rows in the shortest time possible.
FIRST_ROWS mode, the optimizer in Oracle Database optimizes for fast response time by having the Text domain index return score-sorted rows, if possible. This is the default behavior when you use the
If you want to optimize for better throughput under
FIRST_ROWS, you can use the
DOMAIN_INDEX_NO_SORT hint. Better throughput means you are interested in getting all the rows to a query in the shortest time.
The following example achieves better throughput by not using the Text domain index to return score-sorted rows. Instead, Oracle Text sorts the rows after all the rows that satisfy the
CONTAINS predicate are retrieved from the index:
select /*+ FIRST_ROWS DOMAIN_INDEX_NO_SORT */ pk, score(1), col from ctx_tab where contains(txt_col, 'test', 1) > 0 order by score(1) desc;
See Also:Oracle Database Performance Tuning Guide for more information about the query optimizer and using hints such as
The Composite Domain Index feature of the Extensibility Framework in Oracle Database 11g, enables structured columns to be indexed by Oracle Text. Therefore, both text and one or more structured criteria can be satisfied by one single Oracle Text index row source. Performance for the following types of query are improved:
Text query with structured criteria in the SQL
Text query with structured
Combination of both of the previous two query types.
As with concatenated btree indexes or bitmap indexes, applications will experience slow-down in DML performance as the number of
BY columns increases. Where
SCORE-sort push-down is optimized for response time, the structured sort or combination of
SCORE and structured sort push-down are also optimized for response time, and not for throughput. However, using
(n) hints to force the sort to be pushed into CDI while fetching the entire hitlist may result in poor query response time.
Support for mapping a
BY column to
MDATA enables query performance to be optimized for equality searches by restricting supported functionality of
LIKE. However, mapping a
BY column to
MDATA is not recommended if the
BY column contains sequential values, or has very high cardinality. Doing so can result in a very long and narrow
$I table and reduced
$X performance. One example of such a sequential column might be one that uses
DATE stamp. For such sequential columns, mapping to
SDATA is recommended.
The following hints can be used to push or not push the
BY predicates into the CDI:
DOMAIN_INDEX_SORT. The query optimizer will try to push the applicable sorting criteria into the specified composite domain index.
DOMAIN_INDEX_NO_SORT. The query optimizer will try NOT to push sorting criteria into the specified composite domain index.
DOMAIN_INDEX_FILTER(table name index name). The query optimizer will try to push the applicable FILTER BY predicate(s) into the specified composite domain index.
DOMAIN_INDEX_NO_FILTER(table name index name). The query optimizer will not try to push the applicable
BY predicate(s) into the specified composite domain index.
The following example performs an optimized query on the table
SELECT bookid, pub_date, source FROM (SELECT /*+ domain_index_sort domain_index_filter(books books_ctxcdi) */ bookid, pub_date, source FROM books WHERE CONTAINS(text, 'aaa',1)>0 AND bookid >= 80 ORDER BY PUB_DATE desc nulls last, SOURCE asc nulls last, score(1) desc) WHERE rownum < 20;
domain_index_filterhint does not force the query optimizer to use CDI. Instead, if the cost-based optimizer chooses to use the CDI, then it should also push the filter predicate into the index. To force the query optimizer to choose CDI index, you additionally need to use the
Oracle Text includes a tracing facility that enables you to identify bottlenecks in indexing and querying.
Oracle Text provides a set of predefined traces. Each trace is identified by a unique number. There is also a symbol in
CTX_OUTPUT for this number.
Each trace measures a specific numeric quantity—for instance, the number of
$I rows selected during text queries.
Traces are cumulative counters, so usage is as follows:
The user enables a trace.
The user performs one or more operations. Oracle Text measures activities and accumulates the results in the trace.
The user retrieves the trace value, which is the total value across all operations done in step 2.
The user resets the trace to 0.
The user starts over at Step 2.
So, for instance, if in step 2 the user runs two queries, and query 1 selects 15 rows from
$I, and query 2 selects 17 rows from
$I, then in step 3 the value of the trace would be 32 (15 + 17).
Traces are associated with a session—they can measure operations that take place within a single session, and, conversely, cannot make measurements across sessions.
During parallel sync or optimize, the trace profile will be copied to the slave sessions if and only if tracing is currently enabled. Each slave will accumulate its own traces and implicitly write all trace values to the slave logfile before termination.
See Also:Oracle Text Reference
In general, parallel queries are optimal for DSS, OLAP, or analytical systems with large data collection, multiple CPUs with a low number of concurrent users, or parallelized across Oracle Real Application Clusters (Oracle RAC) nodes.
Oracle Text supports parallel queries as follows:
Parallel query refers to the parallelized processing of a local
CONTEXT index. Based on the parallel degree of the index and various system attributes, Oracle determines the number of parallel query slaves to be spawned to process the index. Each parallel query slave processes one or more index partitions. This is the default query behavior for local indexes created in parallel.
However, for heavily loaded systems with high numbers of concurrent users, query throughput will generally be worse with parallel query because top N hits can usually be satisfied by the first few partitions, if the query is run serially. For example, typical top N text queries with an
BY partition key column, such as:
select * from ( select story_id from stories_tab where contains(...)>0 order by publication_date desc) where rownum <= 10;
will generally perform worse with a parallel query.
You can disable parallel querying after a parallel index operation with an
ALTER INDEX statement as follows:
Alter index <text index name> NOPARALLEL; Alter index <text index name> PARALLEL 1;
You can also enable or increase the parallel degree by specifying:
Alter index <text index name> paralllel < parallel degree >;
When considering whether to use Oracle Real Application Clusters (Oracle RAC) to improve Oracle Text performance, it is essential to understand which performance issues that you are trying to solve. Oracle RAC is a great solution for improving query throughput. If you can get good performance from Oracle Text with a light query load, then you can expect to get excellent scalability from Oracle RAC as the query load increases.
Further improvements in Oracle Text performance in an Oracle RAC environment may be achieved by physically partitioning the text data and text indexes (using local partitioned indexes), and ensuring that partitions are handled by separate Oracle RAC nodes. This way, you avoid wasteful duplication of the cache contents across multiple nodes and, therefore, maximize the benefit of Oracle RAC cache fusion.
In Oracle 10g Release 1, each Oracle Text index partition must be forced into a separate database file when the index is created. This enables the use of the "re-mastering" feature in Oracle RAC to force database file affinity, in which each node concentrates on a particular database file and, therefore, a particular Oracle Text index partition.
In Oracle 10g Release 2 and forward, Oracle supports database object-level affinity, which makes it much easier to allocate index objects (
$R tables) to particular nodes.
While Oracle RAC offers solutions for improving query throughput and performance, is not a "magic bullet," and it will not necessarily enable you to continue to get the same performance improvements as you scale up the data volumes. You are more likely to see improvements by increasing the amounts of memory available to the SGA cache, or by partitioning your data in such a way that queries will normally not need to hit all of the partitions of a table in order to provide the required set of query results.
Issuing a query with more than one predicate can cause a blocking operation in the execution plan. For example, consider the following mixed query:
select docid from mytab where contains(text, 'oracle', 1) > 0 AND colA > 5 AND colB > 1 AND colC > 3;
Assume that all predicates are unselective and colA, colB, and colC have bitmap indexes. The cost-based optimizer in Oracle Database chooses the following execution plan:
TABLE ACCESS BY ROWIDS BITMAP CONVERSION TO ROWIDS BITMAP AND BITMAP INDEX COLA_BMX BITMAP INDEX COLB_BMX BITMAP INDEX COLC_BMX BITMAP CONVERSION FROM ROWIDS SORT ORDER BY DOMAIN INDEX MYINDEX
AND is a blocking operation, Oracle Text must temporarily save the rowid and score pairs returned from the Oracle Text domain index before running the
Oracle Text attempts to save these rowid and score pairs in memory. However, when the size of the result set containing these rowid and score pairs exceeds the
SORT_AREA_SIZE initialization parameter, Oracle Text spills these results to temporary segments on disk.
Because saving results to disk causes extra overhead, you can improve performance by increasing the
SORT_AREA_SIZE parameter using
SESSION as follows:
alter session set SORT_AREA_SIZE = <new memory size in bytes>;
For example, to set the buffer to approximately 8 megabytes, enter:
alter session set SORT_AREA_SIZE = 8300000;
This section answers some of the frequently asked questions about query performance.
Answer: There are generally two measures of query performance:
Response time, the time to get an answer to an individual query, and
Throughput, the number of queries that can be run in any time period; for example, queries each second).
These two are related, but are not the same. In a heavily loaded system, you normally want maximum throughput, whereas in a relatively lightly loaded system, you probably want minimum response time. Also, some applications require a query to deliver all its hits to the user, whereas others might only require the first 20 hits from an ordered set. It is important to distinguish between these two scenarios.
Answer: The fastest type of query will meet the following conditions:
No other conditions in the
BY clause at all
Only the first page of results is returned (for example, the first 10 or 20 hits).
Answer: Yes. Collecting statistics on your tables enables Oracle Text to do cost-based analysis. This helps Oracle Text choose the most efficient execution plan for your queries.
See Also:"Optimizing Queries with Statistics"
Answer: The speed at which the text index can deliver ROWIDs is not affected by the actual size of the data. Text query speed will be related to the number of rows that must be fetched from the index table, number of hits requested, number of hits produced by the query, and the presence or absence of sorting.
Answer: The format of the documents (plain ascii text, HTML or Microsoft Word) should make no difference to query speed. The documents are filtered to plain text at indexing time, not query time.
The cleanliness of the data will make a difference. Spell-checked and sub-edited text for publication tends to have a much smaller total vocabulary (and therefore size of the index table) than informal text such as e-mails, which will contain many spelling errors and abbreviations. For a given index memory setting, the extra text takes up more memory, which can lead to more fragmented rows than in the cleaner text, which can adversely affect query response time.
Answer: There are two ways the kernel can query the text index. In the first and most common case, the kernel asks the text index for all the rowids that satisfy a particular text search. These rowids are returned in batches. In the second, the kernel passes individual rowids to the text index, and asks whether that particular rowid satisfies a certain text criterion.
The second is known as a functional lookup, and is most commonly done where there is a very selective structured clause, so that only a few rowids must be checked against the text index. An example of a search where a functional lookup may be used:
SELECT ID, SCORE(1), TEXT FROM MYTABLE
WHERE START_DATE = '21 Oct 1992' <- highly selective AND CONTAINS (TEXT, 'commonword') > 0 <- unselective
Functional invocation is also used for text query ordered by structured column (for example date, price) and text query is unselective.
Answer: All queries look at the index token table. Its name has the form
DR$indexname$I. This contains the list of tokens (column
TOKEN_TEXT) and the information about the row and word positions where the token occurs (column
The row information is stored as internal DOCID values. These must be translated into external ROWID values. The table used for this depends on the type of lookup: For functional lookups, the
DR$indexname$K, is used. This is a simple Index Organized Table (IOT) which contains a row for each DOCID/ROWID pair.
For indexed lookups, the
DR$indexname$R, is used. This holds the complete list of ROWIDs in a BLOB column.
Hence we can easily find out whether a functional or indexed lookup is being used by examining a SQL trace, and looking for the $K or $R tables.
Note:These internal index tables are subject to change from release to release. Oracle recommends that you do not directly access these tables in your application.
Answer: Yes, it certainly does.
If there is no sorting, then Oracle Text can return results as it finds them, which is quicker in the common case where the application needs to display only a page of results at a time.
Answer: Sorting by relevance (
SCORE(n)) can be extremely quick if the
FIRST_ROWS(n) hint is used. In this case, Oracle Text performs a high speed internal sort when fetching from the text index tables.
An example of such a query:
SELECT /*+ FIRST_ROWS(10) */ ID, SCORE(1), TEXT FROM mytable WHERE CONTAINS (TEXT, 'searchterm', 1) > 0 ORDER BY SCORE(1) DESC;
Note that for this to work efficiently, there must be no other criteria in the
WHERE clause other than a single
Answer: For querying, you want to strive for a large system global area (SGA). You can set these parameters related to SGA in your Oracle Database initialization file. You can also set these parameters dynamically.
SORT_AREA_SIZE parameter controls the memory available for sorting for
ORDER BY queries. You should increase the size of this parameter if you frequently order by structured columns.
Answer: Yes. Typically, a
SELECT statement selects more than one column from your base table. Because Oracle Text fetches columns to memory, it is more efficient to store wide base table columns such as LOBs out of line, especially when these columns are rarely updated but frequently selected.
When LOBs are stored out of line, only the LOB locators need to be fetched to memory during querying. Out of line storage reduces the effective size of the base table making it easier for Oracle Text to cache the entire table to memory. This reduces the cost of selecting columns from the base table, and hence speeds up text queries.
In addition, having smaller base tables cached in memory enables more index table data to be cached during querying, which improves performance.
Answer: The fastest type of query is one where there is only a single
CONTAINS clause, and no other conditions in the
Consider the following multiple
SELECT title, isbn FROM booklist WHERE CONTAINS (title, 'horse') > 0 AND CONTAINS (abstract, 'racing') > 0
We can obtain the same result with section searching and the
WITHIN operator as follows:
SELECT title, isbn FROM booklist WHERE CONTAINS (alltext, 'horse WITHIN title AND racing WITHIN abstract')>0
This will be a much faster query. To use a query like this, we must copy all the data into a single text column for indexing, with section tags around each column's data. This can be done with PL/SQL procedures before indexing, or by making use of the
USER_DATASTORE datastore during indexing to synthesize structured columns with the text column into one document.
Answer: Each distinct word used in a query will require at least one row to be fetched from the index table. It is therefore best to keep the number of expansions down as much as possible.
You should not use expansions such as wild cards, thesaurus, stemming and fuzzy matching unless they are necessary to the task. In general, a few expansions (say up to 20) is OK, but you should try to avoid more than 100 or so expansions in a query. The query feedback mechanism can be used to determine the number of expansions for any particular query expression.
In addition for wildcard and stem queries, you can remove the cost of term expansion from query time to index time by creating prefix, substring or stem indexes. Query performance increases at the cost of longer indexing time and added disk space.
Prefix and substring indexes can improve wildcard performance. You enable prefix and substring indexing with the
BASIC_WORDLIST preference. The following example sets the wordlist preference for prefix and substring indexing. For prefix indexing, it specifies that Oracle Text create token prefixes between 3 and 4 characters long:
ctx_ddl.create_preference('mywordlist', 'BASIC_WORDLIST'); ctx_ddl.set_attribute('mywordlist','PREFIX_INDEX','TRUE'); ctx_ddl.set_attribute('mywordlist','PREFIX_MIN_LENGTH', '3'); ctx_ddl.set_attribute('mywordlist','PREFIX_MAX_LENGTH', '4'); ctx_ddl.set_attribute('mywordlist','SUBSTRING_INDEX', 'YES');
You enable stem indexing with the
ctx_ddl.create_preference('mylex', 'BASIC_LEXER'); ctx_ddl.set_attribute ( 'mylex', 'index_stems', 'ENGLISH');
Answer: You can create local partitioned
CONTEXT indexes on partitioned tables. This means that on a partitioned table, each partition has its own set of index tables. Effectively, there are multiple indexes, but the results from each are combined as necessary to produce the final result set.
The index is created using the
CREATE INDEX index_name ON table_name (column_name) INDEXTYPE IS ctxsys.context PARAMETERS ('...') LOCAL
With partitioned tables and local indexes, you can improve performance of the following types of
Answer: Depends. Even though parallel querying is the default behavior for indexes created in parallel, it usually results in degrading overall query throughput on heavily loaded systems.
In general, parallel queries are good for DSS or analytical systems with large data collections, multiple CPUs, and low number of concurrent users.
See Also:"Using Parallel Queries"
Answer: Indexing theme information with a
CONTEXT index takes longer and also increases the size of your index. However, theme indexes enable
ABOUT queries to be more precise by using the knowledge base, if available. If your application uses
ABOUT queries heavily, it might be worthwhile to create a theme component to the index, despite the extra indexing time and extra storage space required.
See Also:"ABOUT Queries and Themes"
CTXCAT indexes work best when text is in small chunks, maybe a few lines maximum, and searches need to restrict or sort the result set according to certain structured criteria, usually numbers or dates.
For example, consider an on-line auction site. Each item for sale has a short description, a current bid price, and dates for the start and end of the auction. A user might want to see all the records with antique cabinet in the description, with a current bid price less than $500. Because he is particularly interested in newly posted items, he wants the results sorted by auction start time.
Such a search is not always efficient with a
CONTAINS structured query on a
CONTEXT index, where the response time can vary significantly depending on the structured and
CONTAINS clauses. This is because the intersection of structured and
CONTAINS clauses or the ordering of text query is computed during query time.
By including structured information such as price and date within the
CTXCAT index, query response time is always in an optimal range regardless of search criteria. This is because the interaction between text and structured query is pre-computed during indexing. Consequently query response time is optimum.
Answer: There are differences in the time and space needed to create the index.
CTXCAT indexes take a bit longer to create and use considerably more disk space than
CONTEXT indexes. If you are tight on disk space, you should consider carefully whether
CTXCAT indexes are appropriate for you.
With respect to query operators, you can now use the richer
CONTEXT grammar in
CATSEARCH queries with query templates. The older restriction of a single
CATSEARCH query grammar no longer holds.
Answer: The optimizer hint
INDEX(table column) can be used in the usual way to drive the query with a text or b-tree index.
You can also use the
NO_INDEX(table column) hint to disable a specific index.
FIRST_ROWS(n) hint has a special meaning for text queries and should be used when you need the first n hits to a query. Use of the
FIRST_ROWS hint in conjunction with
ORDER BY SCORE(n) DESC tells Oracle Text to accept a sorted set from the text index, and not to do a further sort.
See Also:"Optimizing Queries for Response Time"
This section answers some of the frequently asked questions about indexing performance.
Answer: Indexing text is a resource-intensive process. Obviously, the speed of indexing will depend on the power of the hardware involved.
As a benchmark, with an average document size of 5K, Oracle Text can index approximately 200 documents each second with the following hardware and parallel configuration:
4x400Mhz Sun Sparc CPUs
4 gig of RAM
EMC symmetrix (24 disks striped)
Parallel degree of 5 with 5 partitions
Index memory of 600MB for each index process
XML news documents that averaged 5K in size
Other factors such as your document format, location of your data, and the calls to user-defined datastores, filters, and lexers can have an impact on your indexing speed.
Answer: You can set your index memory with the system parameters
MAX_INDEX_MEMORY. You can also set your index memory at run time with the
memory parameter in the parameter string.
You should aim to set the
DEFAULT_INDEX_MEMORY value as high as possible, without causing paging.
You can also improve Indexing performance by increasing the
SORT_AREA_SIZE system parameter.
Experience has shown that using a large index memory setting, even into hundreds of megabytes, will improve the speed of indexing and reduce the fragmentation of the final indexes. However, if set too high, then the memory paging that occurs will cripple indexing speed.
With parallel indexing, each stream requires its own index memory. When dealing with very large tables, you can tune your database system global area (SGA) differently for indexing and retrieval. For querying, you are hoping to get as much information cached in the system global area's (SGA) block buffer cache as possible. So you should be allocating a large amount of memory to the block buffer cache. But this will not make any difference to indexing, so you would be better off reducing the size of the SGA to make more room for a large index memory settings during indexing.
You set the size of SGA in your Oracle Database initialization file.
Answer: The overhead, the amount of space needed for the index tables, varies between about 50% of the original text volume and 200%. Generally, the larger the total amount of text, the smaller the overhead, but many small records will use more overhead than fewer large records. Also, clean data (such as published text) will require less overhead than dirty data such as e-mails or discussion notes, because the dirty data is likely to include many unique words from mis-spellings and abbreviations.
A text-only index is smaller than a combined text and theme index. A prefix and substring index makes the index significantly larger.
Answer: You can expect much lower storage overhead for formatted documents such as Microsoft Word files because such documents tend to be very large compared to the actual text held in them. So 1GB of Word documents might only require 50MB of index space, whereas 1GB of plain text might require 500MB, because there is ten times as much plain text in the latter set.
Indexing time is less clear-cut. Although the reduction in the amount of text to be indexed will have an obvious effect, you must balance this out against the cost of filtering the documents with the
AUTO_FILTER filter or other user-defined filters.
Answer: Parallel indexing can improve index performance when you have a large amount of data, and have multiple CPUs.
You use the
PARALLEL keyword when creating the index:
CREATE INDEX index_name ON table_name (column_name) INDEXTYPE IS ctxsys.context PARAMETERS ('...') PARALLEL 3;
This will create the index with up to three separate indexing processes depending on your resources.
Parallel indexing can also be used to create local partitioned indexes on partitioned tables. However, indexing performance only improves when you have multiple CPUs.
PARALLELto create a local partitioned index enables parallel queries. (Creating a non-partitioned index in parallel does not turn on parallel query processing.)
Parallel querying degrades query throughput especially on heavily loaded systems. Because of this, Oracle recommends that you disable parallel querying after parallel indexing. To do so, use
ALTER INDEX NOPARALLEL.
Answer: When you have multiple CPUs, you can improve indexing performance by creating a local index in parallel. There are two ways to index in parallel:
You can create a local partitioned index in parallel in two ways:
PARALLEL clause with the
LOCAL clause in
CREATE INDEX.In this case, the maximum parallel degree is limited to the number of partitions you have.
Create an unusable index first, then run the
DBMS_PCLXUTIL.BUILD_PART_INDEX utility. This method can result in a higher degree of parallelism, especially if you have more CPUs than partitions.
The following is an example for the second method. In this example, the base table has three partitions. We create a local partitioned unusable index first, the run the
DBMS_PCLUTIL.BUILD_PART_INDEX, which builds the 3 partitions in parallel (inter-partition parallelism). Also inside each partition, index creation is done in parallel (intra-partition parallelism) with a parallel degree of 2.
create index tdrbip02bx on tdrbip02b(text) indextype is ctxsys.context local (partition tdrbip02bx1, partition tdrbip02bx2, partition tdrbip02bx3) unusable; exec dbms_pclxutil.build_part_index(3,2,'TDRBIP02B','TDRBIP02BX',TRUE);
Answer: You can use the
CTX_OUTPUT.START_LOG procedure to log output from the indexing process. Filename will normally be written to
$ORACLE_HOME/ctx/log, but you can change the directory using the
LOG_DIRECTORY parameter in
See Also:Oracle Text Reference to learn more about using this procedure
This section answers some of the frequently asked questions about updating your index and related performance issues.
Answer: The less often you run reindexing with
CTX_DLL.SYNC_INDEX, the less fragmented your indexes will be, and the less you will need to optimize them.
However, this means that your data will become progressively more out of date, which may be unacceptable for your users.
Many systems are OK with overnight indexing. This means data that is less than a day old is not searchable. Other systems use hourly, ten minute, or five minute updates.
Answer: The best way is to time some queries, run index optimization, then time the same queries (restarting the database to clear the SGA each time, of course). If the queries speed up significantly, then optimization was worthwhile. If they don't, you can wait longer next time.
You can also use
CTX_REPORT.INDEX_STATS to analyze index fragmentation.