Skip Headers
Oracle® Identity Manager Connector Guide for IBM RACF Advanced
Release 9.0.4

Part Number E10451-20
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
PDF · Mobi · ePub

C Reconciliation Agent (Voyager) Messages

This appendix describes messages generated by the Reconciliation Agent.

Note:

All Reconciliation Agent messages are prefixed with IDMV.

Message: IDMV000I Voyager Reconciliation Agent Starting

Message-Type: Informational

Action Required: None

Message: IDMV001I Voyager Input Parameters are OK

Message-Type: Informational

Action Required: None

Description: All parameters passed via PARM= statement were ok no errors

Message: IDMV002I Voyager Build Level is at yyyymmddHHMM

Message-Type: Informational

Action Required: None

Description: Voyager Build yyyy = 4 digit year, mm = 2 digit month dd = 2 digit day, HH = 2 digit hour, MM = 2 digit month This was the year,month,day,hour and minute of the Pioneer Reconciliation Agent Production Build prior to Distribution.

Message: IDMV004I Voyager Detects (TCPIP) Jobname XXXXXXXX

Message-Type: Informational

Action Required: None

Description: Voyager has detected the TCPIP STC(Started Task) Name where XXXXXXXX is the STC name passed via the TCPN parameter and used for the connection to the LDAP Gateway.

Message: IDMP005I Pioneer Detects (TCPIP) IP Address of

xxx.xxx.xxx.xxx

Message-Type: Informational

Action Required: None

Description: Voyager will use this IP Address and PORT= to connect to the LDAP Gateway. This IP Address or Hostname is passed via PARM= , IPAD= parameter.

Message: IDMV006I Voyager Detects (TCPIP) IP PORT xxxx

Message-Type: Informational

Action Required: None

Description: Voyager will use the PORT= number in conjunction with the IPAD= parameter to connect to the LDAP gateway.

Message: IDMV007I Voyager Detects Encryption is ON

Message-Type: Informational

Action Required: None

Description: Voyager via ESIZE=16 will turn on 'enable' AES 128 encryption module for encryption of messages to/from LDAP.

Message: IDMV008I Voyager Detects Cache Delay Set to xx Secs

Message-Type: Informational

Action Required: None

Description: Voyager via DELAY= parameter will set a DELAY for polling Cache to xx Secs. This is only applicable to CA Top-Secret and RACF users only. All other users (ACF2) and initially should set this Parameter to DELAY=05 and increased if testing indicates.

Message: IDMV009I Voyager Detects Cache File Opened OK

Message-Type: Informational

Action Required: None

Description: Voyager's external Cache file on dasd has opened ok.

Message: IDMV010I Voyager Computing Cache Timer Delay successful

Message-Type: Informational

Action Required: None

Description: Voyager computed the DELAY= value correctly and will use it for polling cache. This is only applicable to CA Top-Secret and RACF users only.

Message: IDMV011I Voyager Detects Encryption

KVER xxxxxxxxxxxxxxxx

Message-Type: Informational

Action Required: None

Description: Voyager via ESIZE= parameter passed as a PARM= in the STC is using KVER xxxxxxxxxxxxxxxxx for Encryption.

Message: IDMV012I Voyager Detects Debugging is ON

Message-Type: Informational

Action Required: None

Description: Voyager will use the DEBUG= parameter passed to provide detailed diagnostics for Oracle/IDF technical personnel. The output routes to the DEBUGOUT 'DD' statement in Voyager. Be aware if DEBUG=Y then there will be a lot of output placed into the JES2 queue.

Message: IDMV013I Voyager Detects Debugging is OFF

Message-Type: Informational

Action Required: None

Description: Voyager will use the DEBUG= parameter passed and no detailed diagnostics will route to the DEBUGOUT 'DD' statement in Voyager.

Message: IDMV014I Voyager Detects MVS retcodes of xxx

Message-Type: Informational

Action Required: None

Description: Voyager via the PRTNCODE= parameter passed will use this value for its return code when it is shutdown. The value of 'SHUTRC' will produce a 0000 return code and the value of 'TERMRC' will produce the return code greater than zero and that was contained in register 15 at time of shutdown.

Message: IDMV015I Voyager Detects Country Code of XX

Message-Type: Informational

Action Required: None

Description: Voyager has queried z/OS and retrieved the Country code of this system. This will be used in all conversions from EBCDIC to ASCII and ASCII to EBCDIC.

Message: IDMV016I Voyager Detects Hostname of xxxxxxxxxx.xxx

Message-Type: Informational

Action Required: None

Description: Voyager was passed via IPAD= parameter a Hostname instead Of an IP address and this will be used to connect to the LDAP Gateway.

Message: IDMV016E Voyager Detects Bad Hostname of xxxxxxxxxx.xxx

Message-Type: Error

Action Required: Investigate error

Description: Voyager was passed via IPAD= parameter a Hostname instead Of an IP address and this will be used to connect to the LDAP Gateway this Hostname was queried via the local DNS server(s) and failed to be resolved.

Message: IDMV019I Voyager Initialization of TCP API was Successful

Message-Type: Informational

Action Required: None

Description: Voyager has initialized the TCPIP stack successfully

Message: IDMP019E Voyager Initialization of TCP API Failed RC: xx

Message-Type: Error

Action Required: Investigate error

Description: Voyager's initialization of the TCPIP API interface failed. A primary cause is a missing security subsystem (RACF,ACF2, Or Top-Secret) permit for facility 'bpx.*'

Message: IDMV020I Voyager Initialization of GETCLIENTID was Successful

Message-Type: Informational

Action Required: None

Description: Voyager has issued a GETCLIENTID and it was successful. This is normal for the client/socket server like Voyager.

Message: IDMV021I Voyager Accepting Messages on xxx.xxx.xxx.xxx (OR) hostname.com

Message-Type: Informational

Action Required: None

Description: Voyager will send/receive message to/from the LDAP gateway

on IP Address xxx.xxx.xxx.xxx with PORT= or on Hostname - Hostname.com with PORT=

* Note: Hostname.com is an example, this would be the hostname

Of the LDAP gateway.

Message: IDMV021I Voyager Initialization of PTON was successful

Message-Type: Informational

Action Required: None

Description: Voyager successfully converted the IP address to the correct

addressing type to communicate to the LDAP gateway.

Message: IDMV021E Voyager Initialization of PTON failed RC: xx

Message-Type: Error

Action Required: Investigate

Description: Voyager failed during its conversion to numeric. The RC(return code) is documented in the following source. z/OS V1R9.0 Communication Server IP CICS Sockets Guide Manual – SC31-8807-04

Message: IDMV025I Voyager Connected to Gateway Server

was successful

Message-Type: Informational

Action Required: None

Description: Voyager successfully connected to the LDAP Gateway using either IP address = xxx.xxx.xxx.xxx or Hostname.com with PORT = xxxx.

Message: IDMV032I Voyager Connection Start Timer Begins

Message-Type: Informational

Action Required: None

Description: Voyager using PARM= , 'STARTDELAY=' will delay it's connection by xx secs specified in 'STARTDELAY='. The 'STARTDELAY=' timer started.

Message: IDMV033I Voyager Connection Start Timer Ends

Message-Type: Informational

Action Required: None

Description: Voyager using PARM= , 'STARTDELAY=' will delay it's connection by xx secs specified in 'STARTDELAY='. The 'STARTDELAY=' timer ended.

Message: IDMV050I Voyager Cache Polling Begins

Message-Type: Informational

Action Required: None

Description: Voyager has started polling its subpool 231 cache for events created by the installed product exits. This is a normal process for the real-time reconciliation agent.

Message: IDMV051I Voyager Cache Polling Ends

Message-Type: Informational

Action Required: None

Description: Voyager has ended its polling its subpool 231 cache for events created by the installed product exits. This is a normal process for the real-time reconciliation agent.

Message: IDMV100I Voyager Shutdown Started

Message-Type: Informational

Action Required: None

Description: Voyager Shutdown has started via a z/OS Modify command.

Message: IDMV101I Voyager Reconciliation Agent Has Terminated

Message-Type: Informational

Action Required: None

Description: Voyager has been terminated

Message: IDMV102I Voyager has Ended with Zero Return Codes

Message-Type: Informational

Action Required: None

Description: Voyager has ended with a zero MVS Condition code. This condition was set with the PRTNCODE=SHUTRC parameter.

Message: IDMV103I Voyager has Ended with Non-Zero Return Code

Message-Type: Informational

Action Required: None

Description: Voyager has ended with a non-zero MVS Condition code. This condition was set with the PRTNCODE=TERMRC parameter.

Message: IDMV104I Voyager sent messages xxxxxx received messages xxxxxx

Message-Type: Informational – Shutdown Statistic

Action Required: None

Description: Voyager shutdown statistic on amount of work done.

Message: IDMV102E Voyager Cache Dasd File Not be Found

Message-Type: Error

Action Required: Investigate

Description: Voyager Cache dasd file used for recovery was not found and Voyager will abend.

Message: IDMV130I Voyager Operator Interface now Open for 30 Seconds

Message-Type: Informational

Action Required: None

Description: Voyager Modify Operator interface is now open for commands.

Message: IDMV130I Voyager Operator Interface now Closed

Message-Type: Informational

Action Required: None

Description: Voyager Modify Operator interface is now closed and no more Modify commands are accepted.

Message: IDMV151I Voyager DNS Request hostname.com

Message-Type: Informational

Action Required: None

Description: Voyager via IPAD= has been asked to use a DNS hostname instead of an IP Address to connect to the LDAP gateway.

Message: IDMV152I Voyager IP Connect Request xxx.xxx.xxx.xxx

Message-Type: Informational

Action Required: None

Description: Voyager via IPAD= has been asked to use an IP address instead of a hostname to connect to the LDAP gateway.

-

Message: IDMV200E Voyager Startup Parameter Error xxxxxxxxxxxxxxx

Message-Type: Informational

Action Required: None

Description: Voyager had a startup PARM= error , indicated by xxxxxxxxxxxxxxx

-

Message: IDMV200I Voyager unable to connect to the Gateway

Message-Type: Informational

Action Required: None

Description: Voyager was unable to connect to the LDAP Gateway either Via hostname or IP Address, Voyager will retry the connection. This message and IDMV201I usually are together.

-

Message: IDMV201I Voyager connection to the Gateway failed

Message-Type: Informational

Action Required: None

Description: Voyager was unable to connect to the LDAP Gateway either Via hostname or IP Address, Voyager will retry the connection. This message and IDMV200I are usually together.

-

Message: IDMV202E Voyager no Storage Token Found

Message-Type: Informational

Action Required: None

Description: Voyager was unable to find the required subpool 231 storage token, Voyager will terminate.

-

Message: IDMV202I Voyager Unable to Connect to new IP/Port

Message-Type: Informational

Action Required: None

Description: Voyager's IP address and port were swapped via a Modify command and it could not connect to the LDAP using that combination.

Message: IDMV203E Voyager Quiescing Because of the subpool Not found.

Message-Type: Informational

Action Required: None

Description: Voyager is shutting down because of a missing Storage token for the subpool, required for normal operations.

Message: IDMV204E Voyager subpool 231 cannot be found

Message-Type: Informational

Action Required: None

Description: Voyager went to poll the subpool 231 (cache) for events And the subpool was not there. This will result in Voyager Quiescing and shutting down.

Message: IDMV300I *Debug* - xxxxxxxxxxxxxxxxxxxxxxxx

Message-Type: Error

Action Required: None

Description: Voyager will display this statement when DEBUG=Y is on and Output will route to // DEBUGOUT 'DD'.

Message: IDMV305I Voyager Debugging Was Turned XXX

Message-Type: Informational

Action Required: None

Dsecription: An Operator Command has either turned Debugging 'ON' or 'OFF'. If turned 'ON' and debugging is 'ON' Voyager takes no action. If debugging is 'OFF' the Voyager will turn 'ON' debugging and route all debug Output to z/OS Sysout/Sysprint.

Message: IDMV306I Voyager Received Status Query an is Alive

Message-Type: Informational

Action Required: None

Dsecription: An Operator Command has asked Voyager for a STATUS