This chapter describes how to perform the main kinds of GeoRaster operations. A typical GeoRaster workflow consists of most or all of the following steps:
Create the GeoRaster table and raster data table (see Section 3.1).
Initialize or create GeoRaster objects (see Section 3.2).
Load raster imagery or grids (see Section 3.3).
Validate GeoRaster objects, if they have not already been validated (see Section 3.4).
Georeference the GeoRaster objects, if necessary (see Section 3.5).
Set the spatial extents of the GeoRaster objects (see Section 3.6).
Create spatial indexes or other indexes, or both (see Section 3.7).
Change and optimize the GeoRaster storage format, if necessary (see Section 3.8).
Copy GeoRaster objects (see Section 3.9).
Query and update the GeoRaster metadata (see Section 3.10).
Query and update cell data (see Section 3.11).
Process GeoRaster objects (see Section 3.12).
Compress GeoRaster objects, if appropriate (see Section 3.13).
View GeoRaster objects (see Section 3.14).
Export GeoRaster objects (see Section 3.15).
Update GeoRaster objects before committing the transaction (see Section 3.16).
Use template-related subprograms to develop GeoRaster applications (see Section 3.17).
Use GeoRaster with Workspace Manager and Label Security (see Section 3.18).
Maintain efficient tablespace use by GeoRaster objects (see Section 3.19).
Maintain GeoRaster objects and system data in the database (see Section 3.20).
Transfer GeoRaster data between databases (see Section 3.21).
Use the Oracle Database transportable tablespaces feature with GeoRaster data (see Section 3.22).
After you create the GeoRaster objects, load the data, and validate the GeoRaster objects, you can perform the remaining operations in any order, depending on your application needs. You may also be able to skip certain operations.
Some operations can be performed using SQL, and some operations must be performed using PL/SQL blocks. You must update the GeoRaster object after you delete or edit the metadata or cell data of the GeoRaster object and before you commit the changes (see Section 3.16). For some examples of these operations, see the demo files described in Section 1.15 and the examples in Chapter 4.
This chapter contains the sections that explain the main kinds of GeoRaster operations.
Subsequent chapters contain detailed reference information about the SDO_GEOR, SDO_GEOR_ADMIN, and SDO_GEOR_UTL packages, which contains subprograms (functions and procedures) to work with GeoRaster data and metadata.
Before you can work with GeoRaster objects, you must create a GeoRaster table and one or more raster data tables, if they do not already exist.
A GeoRaster table is any table that includes a column of type SDO_GEORASTER. This column can be an attribute column of another user-defined object type. Example 3-1 creates a GeoRaster table named CITY_IMAGES, which contains a column named IMAGE for storing GeoRaster objects.
CREATE TABLE city_images (image_id NUMBER PRIMARY KEY, image_description VARCHAR2(50), image SDO_GEORASTER);
For more information about GeoRaster tables, see Section 1.4.
After creating a GeoRaster table, you should create one or more raster data tables (RDTs) to be used with the objects in the GeoRaster table. You can create a raster data table using the original LOB storage paradigm BasicFile Lobs (BasicFiles) or using the LOB storage format SecureFile LOBs (SecureFiles) introduced in Release 11.1. Using SecureFiles significantly improves the performance of GeoRaster operations.
Example 3-2 creates a raster data table named CITY_IMAGES_RDT using BasicFiles. The RDT will be used to store information about each block of each GeoRaster object in the CITY_IMAGES table. (The association between a GeoRaster table and a raster table is not made until you create a GeoRaster object, as explained in Section 3.2.)
CREATE TABLE city_images_rdt OF SDO_RASTER (PRIMARY KEY (rasterID, pyramidLevel, bandBlockNumber, rowBlockNumber, columnBlockNumber)) TABLESPACE im_tbs_1 LOB(rasterBlock) STORE AS ( CHUNK 32768 CACHE READS PCTVERSION 0 STORAGE (PCTINCREASE 0) );
CREATE TABLE city_images_rdt OF SDO_RASTER (PRIMARY KEY (rasterID, pyramidLevel, bandBlockNumber, rowBlockNumber, columnBlockNumber)) TABLESPACE im_tbs_2 LOB(rasterBlock) STORE AS SECUREFILE (CACHE);
Example 3-4 creates a raster data table with the same name as in Example 3-2 and Example 3-3, also using SecureFiles as in Example 3-3, but creating it as a relational table instead of an object table.
CREATE TABLE city_images_rdt (rasterID NUMBER, pyramidLevel NUMBER, bandBlockNumber NUMBER, rowBlockNumber NUMBER, columnBlockNumber NUMBER, blockMBR SDO_GEOMETRY, rasterBlock BLOB, CONSTRAINT pkey PRIMARY KEY (rasterId, pyramidLevel, bandBlockNumber, rowBlockNumber, columnBlockNumber)) LOB (rasterblock) STORE AS SECUREFILE(cache);
The CREATE TABLE statement for a raster data table must include the following clause (which is included in the preceding examples):
(PRIMARY KEY (rasterID, pyramidLevel, bandBlockNumber, rowBlockNumber, columnBlockNumber))
This PRIMARY KEY clause creates a B-tree index on the raster data table, and this index is essential for optimal query performance.
When you use BasicFiles, you can specify a larger CHUNK size (16 or 32 KB) for the LOB storage to improve performance. With SecureFiles, there is no need to specify the CHUNK size parameter, and there are few other storage parameters to consider. Raster data tables using SecureFile LOBs must be created in a tablespace with the automatic segment space management option. For information about using Oracle SecureFiles and performance considerations for BasicFile LOBs, see Oracle Database SecureFiles and Large Objects Developer's Guide.
For reference information about creating tables, including specifying LOB storage, see the section about the CREATE TABLE statement in Oracle Database SQL Language Reference.
For more information about the keywords and options when creating a raster data table, see Section 1.4.2.
To ensure the consistency and integrity of internal GeoRaster tables and data structures, GeoRaster automatically creates a unique DML trigger for each GeoRaster column whenever a user creates a GeoRaster table (that is, a table with at least one GeoRaster column), with the following exception: if you use the ALTER TABLE statement to add one or more GeoRaster columns, you must call the SDO_GEOR_UTL.createDMLTrigger procedure to create the DML trigger on each added GeoRaster column.
The trigger is fired after each of the following data manipulation language (DML) operations affecting a GeoRaster object: insertion of a row, update of a GeoRaster object, and deletion of a row.
GeoRaster automatically performs the following actions when the trigger is fired:
After an insert operation, the trigger inserts a row with the GeoRaster table name, GeoRaster column name, raster data table name, and
rasterID value into the USER_SDO_GEOR_SYSDATA view (described in Section 2.4). If an identical entry already exists, an exception is raised.
After an update operation, if the new GeoRaster object is null or empty, the trigger deletes the old GeoRaster object. If there is no entry in the USER_SDO_GEOR_SYSDATA view for the old GeoRaster object (that is, if the old GeoRaster object is null), the trigger inserts a row into that view for the new GeoRaster object. If there is an entry in the USER_SDO_GEOR_SYSDATA view for the old GeoRaster object, the trigger updates the information to reflect the new GeoRaster object.
After a delete operation, the trigger deletes raster data blocks for the GeoRaster object in its raster data table, and it deletes the row in the USER_SDO_GEOR_SYSDATA view for the GeoRaster object.
Before you can store a GeoRaster image in a GeoRaster table, you must create the GeoRaster object and insert it into a GeoRaster table before you start working on it. To create a new GeoRaster object, you have the following options:
Initialize an empty GeoRaster object, using the SDO_GEOR.init function.
Create a blank GeoRaster object, using the SDO_GEOR.createBlank function.
You cannot perform any GeoRaster operations if the object has not been properly created (that is, if the object is an atomic null). The SDO_GEOR.init and SDO_GEOR.createBlank functions initialize GeoRaster objects with their raster data table and raster ID values if these are not already specified, and the GeoRaster DML trigger ensures that the raster data table name and raster ID value pair is unique for the current user.
If the new GeoRaster object will hold raster cell data (resulting from another GeoRaster procedure, such as SDO_GEOR.importFrom, SDO_GEOR.subset, or SDO_GEOR.copy), and if the raster data table for this new GeoRaster object does not exist, you must first create the raster data table. For information about creating a raster data table, including examples, see Section 3.1.2.
To avoid potential GeoRaster data problems (some of which are described in Section 3.20), an initialized GeoRaster object must be registered in the GeoRaster system views, which is done automatically when you insert the GeoRaster object into a GeoRaster table. This should be done before you perform any other operations on the GeoRaster object. Any GeoRaster operations that need to manipulate the raster data table raise an exception if the source or target GeoRaster object is not registered.
To load and export imagery or raster data, always consider third-party ETL tools (see the note in Section 1.14)
If you use features in GeoRaster to load raster data, you have the following options:
Call the SDO_GEOR.importFrom procedure to load images into GeoRaster objects.
Use the GeoRaster loader tool or viewer tool, which are described in Section 1.14.
With both options, you can do the following:
Compress raster data and store the data in JPEG-compressed or DEFLATE-compressed GeoRaster objects.
Load an ESRI world file or a Digital Globe RPC text file (.rpb) into an existing GeoRaster object, and georeference the raster data without reloading it. You can also specify an SRID with the world file and generate the spatial extent of the data.
Load a GeoTIFF format file with georeferencing, with or without raster data.
Because an ESRI world file or .
rpb file does not contain coordinate system information, you can specify the SRID value of a coordinate reference system for the load operation. However, if you do not specify an SRID, the model SRID of the GeoRaster objects is set to 0 (zero) by the loader, which means that the GeoRaster object is invalid, and therefore you must use the SDO_GEOR.setModelSRID procedure to specify a valid model space for this object. If you do not yet know the coordinate system of the model space, you can specify the SRID value as 999999, which means that the coordinate reference system is unknown. (Specifically, SRID 999999 is associated with a coordinate reference system named
unknown CRS.) Later, when you know the actual coordinate reference system of the model space, you can set the SRID value accordingly.
For more information about the
unknown CRS (SRID 999999) coordinate reference system, see Oracle Spatial Developer's Guide.
The GeoRaster loader does not support source raster files in BSQ interleaving, and it might raise an "insufficient memory" error if the files are too big, and it might have other restrictions. To avoid such problems, you can reformat and reblock the source files so that they can be properly loaded.
As an example, one way to do this is to use GDAL, an Open Source raster transformation library available from
http://www.gdal.org, to reformat or reblock the image or raster file so that JAI (Java Advanced Imaging) can handle it. GDAL supports GeoRaster natively and can import and export GeoRaster objects directly, and can also process GeoRaster objects; for more information, see
http://www.oracle.com/technetwork/database/enterprise-edition/getting-started-with-gdal-133874.pdf. You can also use GDAL to generate TFW files. For example, execute commands such as the following two (each command on a single line) using the GDAL command line or (for batch conversion) shell:
gdal_translate -of GTiff -co "TFW=YES" -co "INTERLEAVE=PIXEL" -co "TILED=YES" D:\my_image.tif D:\my_new_image.tif gdal_translate -of GTiff -co "TILED=YES" -co "TFW=YES" D:\my_image.ecw D:\my_new_image.tif
In the preceding example, the first command generates a TFW file, changes the interleaving to BIP (which is supported by JAI), and reblocks the image to 256x256. The second command converts ECW to TIFF, generates TFW, and reblocks the image.
Then use the GeoRaster loader tool (described in Section 1.14) , specifying reblocking so that the image can be loaded successfully and later retrieved from the database efficiently, as in the following example (a single command):
java -Xmx1024m oracle.spatial.georaster.tools.GeoRasterLoader mymachine db11 6521 georaster georaster thin 32 T globe image "blocking=true, blocksize=(512,512,3)" "D:my_image.tif,2,RDT_15, D:\my_image.tfw,82213"
If you receive an "insufficient memory" error when calling SDO_GEOR.importFrom to load a very large image, try loading the image with a different blocking size parameter or reblock the image into smaller internal tile sizes using GDAL before loading. For extremely large images, you can also use GDAL to tile the image into multiple smaller image files with sizes that JAI can handle, or you use GDAL to load and export the images directly.
Before you use a GeoRaster object or after you manually edit the raster data and metadata of a GeoRaster object, you should ensure that the object is valid. Validation for a GeoRaster object includes checking the registration of the GeoRaster object, checking the metadata and the raster cell data, and making sure that the metadata and data are consistent. For example, validation checks the raster type, dimension information, and the actual sizes of cell blocks, and it performs other checks.
If you used the GeoRaster loader tool described in Section 1.14, the GeoRaster objects were validated during the load operation.
GeoRaster provides the following validation subprograms:
SDO_GEOR.validateGeoRaster validates the GeoRaster object, including cell data and metadata. It returns
TRUE if the object is valid; otherwise, it returns one of the following: an Oracle error code indicating why the GeoRaster object is invalid,
FALSE if validation fails for an unknown reason, or
NULL if the GeoRaster object is null. You should always use this function after you create a GeoRaster object.
SDO_GEOR.schemaValidate validates the metadata against the GeoRaster XML schema. You can use this function to locate errors if the SDO_GEOR.validateGeoRaster function returned the error code 13454. The SDO_GEOR.schemaValidate and SDO_GEOR.validateGeoRaster functions do not validate the spatial extent geometry.
SDO_GEOR.validateBlockMBR validates the
blockMBR geometry associated with each raster block stored in the raster data table. If there are any invalid
blockMBR geometries, call the SDO_GEOR.generateBlockMBR procedure to regenerate them.
Georeferencing, as explained in Section 1.6, establishes the relationship between cell coordinates of GeoRaster data and real-world ground coordinates (or some local coordinates). If you need to georeference GeoRaster objects, the following approaches are available:
If the original image is already georeferenced and if the georeferencing information is stored in an ESRI world file or .
rpb file containing RPC coefficients you can use the SDO_GEOR.importFrom procedure to load an ESRI world file or .
rpb file from a file or from a CLOB object, along with the image data itself (in either FILE or BLOB format). You can also use the GeoRaster client-side loader tool (described in Section 1.14) to load an ESRI world file or .
rpb file from a file, along with the image file itself.
Because an ESRI world file or .
rpb file does not specify the model coordinate system, you can set the model space of the georeferenced GeoRaster object using an Oracle SRID in either of the following ways: specify the SRID along with the world file as a parameter to the SDO_GEOR.importFrom procedure or the GeoRaster client-side loader (described in Section 1.14); or, after loading the world file, call the SDO_GEOR.setModelSRID procedure. You can also call the SDO_GEOR.setModelSRID procedure to change the model space of a georeferenced GeoRaster object.
If the original image is a georeferenced GeoTIFF image, you can use the SDO_GEOR.importFrom procedure to load the image with georeferencing, by specifying
GEOTIFF as the input format. To load only the georeferencing information from a GeoTIFF image, without the raster image data, into an existing GeoRaster object, add the
raster=false storage parameter. You can specify a backup SRID with the
srid storage parameter, in case the GeoTIFF configuration values do not match any SRID recognized by Oracle Spatial.
PixelIsArea raster space is equivalent to the GeoRaster upperleft-based cell coordinate system. An export to GeoTiff is always in
PixelIsArea raster space, with a half-pixel adjustment of the affine transformation if the GeoRaster object is in center-based cell coordinate system. An import from GeoTIFF is always to the GeoRaster center-based cell coordinate system, with a half-pixel adjustment of the affine transformation if the GeoTIFF file is specified in
PixelIsArea raster space.
You can also use the GeoRaster client-side loader tool (described in Section 1.14) to load GeoTIFF images with georeferencing, using the storage parameter
geotiff=true. If you omit this parameter or specify
geotiff=false, the image is loaded as a simple TIFF image without georeferencing. The
srid storage parameters also apply to the client-side loader tool.
To load or export GeoTIFF images with the GeoRaster client-side tools, add the following GeoTIFF libraries to your CLASSPATH definition:
xtiff-jai.jar (available from the SourceForge Extensible-TIFF-JAI group)
geotiff-jai.jar (available from the SourceForge GeoTIFF-JAI group)
To load or export GeoTIFF images with the SDO_GEOR.importFrom or SDO_GEOR.exportTo procedure, load these libraries into the MDSYS schema by connecting to the database as the SYSTEM user, editing
/md/admin/sdoldgtf.sql as needed to reflect the paths to the
geotiff-jai.jar files, and running the
sdoldgtf.sql SQL*Plus script. As an alternative to using the
sdoldgtf.sql script, you can enter the following commands:
loadjava -user system/password@database -resolve -force -synonym -schema MDSYS -grant PUBLIC xtiff-jai.jar loadjava -user system/password@database -resolve -force -synonym -schema MDSYS -grant PUBLIC geotiff-jai.jar
If the database is downgraded to a release before Oracle Database 11g, these libraries should be uninstalled according to the script in
/md/admin/sdormgtf.sql, editing it as needed to reflect the paths to the
geotiff-jai.jar files, and either running the
sdormgtf.sql script or entering the following commands:
dropjava -user system/password@database -resolve -force -synonym -schema MDSYS -grant PUBLIC xtiff-jai.jar dropjava -user system/password@database -resolve -force -synonym -schema MDSYS -grant PUBLIC geotiff-jai.jar
You can use the SDO_GEOR.setSRS procedure to add, modify, and delete georeferencing information by directly accessing the GeoRaster SRS metadata. For example, you can create an SDO_GEOR_SRS object and assign the coefficients and related georeferencing information, and then call the SDO_GEOR.setSRS procedure to add or update the spatial reference information of any GeoRaster object. You can use the SDO_GEOR.setSRS procedure to set up the spatial reference information for all supported functional fitting georeferencing models. Examples of setting up the SRS information from an existing DLT model and from an existing RPC model are included in reference section for the SDO_GEOR.setSRS procedure.
If you know that one GeoRaster object has the same SRS information as another GeoRaster object, you can call the SDO_GEOR.getSRS function to retrieve an SDO_GEOR_SRS object from this GeoRaster object, and then call the SDO_GEOR.setSRS procedure to georeference the first GeoRaster object.
If the GeoRaster object can be georeferenced using an affine transformation, you can call the SDO_GEOR.georeference procedure to georeference a GeoRaster object directly. As described in the reference information for the SDO_GEOR.georeference, this procedure takes the coefficients
F and other information, converts them into the coefficients
f, and stores them in the spatial reference information of a GeoRaster object. If the original raster data is rectified and if the model coordinate of its origin (upper-left corner) is (x0, y0) and its spatial resolution or scale is
s, then the following are true: A = s, B = 0, C = x0, D = 0, E = -s, F = y0.
If you have ground control points (GCPs) and want to calculate georeferencing information using a geometric model, you can call the SDO_GEOR.georeference procedure to find the solution. To get and set the GCP-based georeferencing model, use the SDO_GEOR.getGCPGeorefModel function and the SDO_GEOR.setGCPGeorefModel procedure. To get and set only the geometric model, use the SDO_GEOR.getGCPGeorefMethod function and the SDO_GEOR.setGCPGeorefMethod procedure. To manipulate GCPs, use the SDO_GEOR.getControlPoint function and the SDO_GEOR.setControlPoint and SDO_GEOR.deleteControlPoint procedures.
Based on the SRS information of a georeferenced GeoRaster object, transforming GeoRaster coordinate information means finding the model (ground) coordinate associated with a specific cell (raster) coordinate, and the reverse. That is, you can do the following:
Given a specific cell coordinate, you can find the associated model space coordinate using the SDO_GEOR.getModelCoordinate function. For example, if you identify a point in an image, you can find the longitude and latitude coordinates associated with that point.
Given a model space coordinate, you can find the associated cell coordinate using the SDO_GEOR.getCellCoordinate function. For example, if you identify longitude and latitude coordinates, you can find the cell in an image associated with those coordinates.
When a GeoRaster object is created, its spatial extent (
spatialExtent attribute, described in Section 2.1.2) is not necessarily the enclosing geometry in its model space coordinate system. The spatial extent (footprint) geometry might initially be null, or it might reflect the cell space coordinate system or some other coordinate system. The ability to generate and set spatial extents is useful for building large GeoRaster databases of a global or large regional scope, in which the spatial extents are in one global geodetic coordinate system while the GeoRaster objects (imagery, DEMs, and so on) are in different projected coordinate systems. In such a case, you can create a spatial (R-tree) index on the spatial extents, which requires that all spatial extent geometries have the same SRID value.
To ensure that the spatial extent geometry of each GeoRaster object in a table is correct for its model space coordinate system (or for any other coordinate system that you may want to use), you must set the spatial extent. Moreover, to use a spatial index on the spatial extent geometries (described in Section 3.7), all indexed geometries must be based on the same coordinate system (that is, have the same SRID value).
You can set the spatial extent in either of the following ways: specify
spatialExtent=TRUE as a storage parameter to the SDO_GEOR.importFrom procedure or the GeoRaster client-side loader (described in Section 1.14), or use the SQL UPDATE statement. If you use the SDO_GEOR.importFrom procedure or the loader, the SRID cannot be null or 0 (zero), and if there is an R-tree index on the GeoRaster spatial extent, the SRID of the spatial extent must match the SRID of the existing spatial index; otherwise, the spatial extent is set to a null value.
In addition, if you do not already have the spatial extent geometry, you can generate it using the SDO_GEOR.generateSpatialExtent function, and use that geometry to update the GeoRaster object. The following example updates the spatial extent geometry of a specified GeoRaster object in the CITY_IMAGES table (created in Example 3-1 in Section 3.1.1) to the generated spatial extent (reflecting the model coordinate system) of that object:
UPDATE city_images c SET c.image.spatialExtent = sdo_geor.generateSpatialExtent(image) WHERE c.image_id = 100; COMMIT;
If you already know the spatial extent geometry for a GeoRaster object, or if you want the spatial extent geometry to be based on a coordinate system other than the one for the model space, construct the SDO_GEOMETRY object or select it from a table, and then update the GeoRaster object to set its spatial extent attribute to that geometry, as shown in the following example:
DECLARE geom sdo_geometry; BEGIN -- Set geom to an SDO_GEOMETRY object that covers the spatial extent -- of the desired GeoRaster object. If necessary, perform coordinate -- system transformation before setting geom. -- geom := sdo_geometry(...); UPDATE city_images c SET c.image.spatialExtent = geom WHERE c.image_id = 100; COMMIT; END;
If you create a spatial R-tree index on the GeoRaster spatial extents (as described in Section 3.7), all spatial extent geometries must have the same SRID value. However, the GeoRaster objects may have different model SRIDs, and most GeoRaster operations automatically generate a spatial extent for the output GeoRaster objects based on the model SRID of the source GeoRaster object or objects. This can cause problems when the resulting GeoRaster object with a spatial extent is updated into a GeoRaster table, which might already have a spatial index built on its
spatialExtent attribute but using a different SRID.
In such cases, you must transform the spatial extent to the same SRID as that of the spatial index before the insert or update operation. The following example performs a mosaic operation, but then transforms the spatial extent of the resulting GeoRaster object to SRID 8307 before updating the GeoRaster table with that object.
DECLARE gr sdo_georaster; BEGIN SELECT georaster INTO gr FROM mosaic_test WHERE georid=1 FOR UPDATE; sdo_geor.mosaic('mosaic_data', 'georaster', gr, 'blocksize=(512,512)'); -- Transform the spatial extent geometry, if ncessary. -- In this example example, the modelSRID of the mosaic is 27302, -- but the SRID of the spatial index on mosaic_test is 8307. gr.spatialExtent := sdo_cs.transform(gr.spatialExtent, 8307); UPDATE mosaic_test SET georaster=gr WHERE georid=1; END; /
If a spatial R-tree index exists, a commit operation after an insert or update operation causes the index to be updated if the inserted or updated GeoRaster object has a spatial extent geometry. This could slow some operations if you perform a commit after each operation, particularly for batch jobs such as batch image loading. It is usually more efficient to balance the performance of index updates with GeoRaster operations, and to commit only in batches after the operations.
For example, image data loading (the SDO_GEOR.importFrom procedure and the GeoRaster loader) is followed by an internal commit operation, so it would be inefficient to load while generating spatial extents by specifying
spatialExtent=TRUE. Instead, you should probably specify
spatialExtent=FALSE, and then update the
spatialExtent attribute afterward, to speed the loading process.
GeoRaster data can be indexed in various ways. The most important index you can create on a GeoRaster object is a spatial index on the spatial extent (footprint) geometry of the GeoRaster object (
spatialExtent attribute, described in Section 2.1.2); however, see Section 3.6.1 for special considerations if the GeoRaster table has a spatial index. For information about creating spatial indexes, see Oracle Spatial Developer's Guide.
You can also create one or more other indexes, such as:
Function-based indexes on metadata objects using the Oracle XMLType or Oracle Text document indexing functionality
Standard indexes on other user-defined columns of the GeoRaster table, such as cloud coverage, water coverage, or vegetation
You should also create a single B-tree index on the
columnBlockNumber columns of each raster data table.
You can change or specify some aspects of the way raster image data is or will be stored: the raster blocking size, cell depth, interleaving type, and other aspects. To make such changes on an existing GeoRaster object, use the SDO_GEOR.changeFormatCopy procedure, and specify the desired storage parameter values with the
storageParam parameter. You can specify storage parameters with most subprograms that load and process a GeoRaster object to create another GeoRaster object. That is, you can specify the output format when you call functions or procedures such as SDO_GEOR.importFrom, SDO_GEOR.subset, SDO_GEOR.mosaic, SDO_GEOR.reproject, SDO_GEOR.scaleCopy, SDO_GEOR.mergeLayers, and SDO_GEOR.createTemplate.
The storageParam parameter for the resulting GeoRaster objects should be based on factors such as the data size, dimension sizes, and application needs, as you determine them. However, the block sizes can also be optimized automatically based on the dimension sizes of the GeoRaster object and the desired output required by users, so that each GeoRaster object uses only minimum padding space but still meets the application requirements.
For more information, see Section 1.4.1, especially Table 1-1, "storageParam Keywords for Raster Data".
To copy a GeoRaster object, you must either copy it into an empty GeoRaster object or overwrite an existing valid GeoRaster object. (Empty GeoRaster objects are explained in Section 1.4.3.) To make an identical copy of the source GeoRaster object, use the SDO_GEOR.copy procedure; to make a copy that includes storage format changes, use the SDO_GEOR.changeFormatCopy procedure (see Section 3.8).
To copy a GeoRaster object using an empty GeoRaster object, follow these steps:
Initialize an empty GeoRaster object while inserting it into the destination table, returning the empty GeoRaster object.
Use UPDATE statement to update the desired row in the destination table so that its GeoRaster column contains the copied GeoRaster object.
When you are ready to commit the transaction, use the COMMIT statement.
To copy a GeoRaster object so that it overwrites (replaces) an existing GeoRaster object, follow these steps:
Select the existing GeoRaster object for update.
Use UPDATE statement to update the desired row in the destination table so that its GeoRaster column contains the copied GeoRaster object.
When you are ready to commit the transaction, use the COMMIT statement.
You can query metadata for a GeoRaster object, and you can update many attributes of the metadata.
For many of the get functions, there is a corresponding procedure, whose name starts with set, to set, modify, or delete the value of a metadata attribute. For most set procedures, to delete the value of the metadata attribute that the procedure is designed to modify, specify a null value for the attribute. For example, to delete the bin table for a layer of a GeoRaster object, call the SDO_GEOR.setBinTable procedure and specify a null
tableName parameter. However, in most cases you cannot specify a null value for other related attributes. For example, you cannot specify a null
layerNumber parameter in a call to the SDO_GEOR.setBinTable procedure.
Note the following recommendations, requirements, and restrictions:
Most GeoRaster metadata can also be retrieved and modified using XMLType methods or XML-specific SQL functions, such as
updateXML. However, if a GeoRaster get or set subprogram exists for the metadata attribute you want to retrieve or change, use the GeoRaster subprogram instead of an XMLType interface, because the GeoRaster subprograms validate any changes before they are made. If you do call XMLType methods or XML-specific SQL functions to update metadata, you should validate the GeoRaster object before you commit the transaction.
Never directly set the metadata to be null.
Do not directly update the rasterType attribute of a GeoRaster object; instead, call the SDO_GEOR.setRasterType procedure.
To change the raster data table name, use the SDO_GEOR_UTL.renameRDT procedure.
In general, you should not directly update the attributes of a GeoRaster object, except for the
To display part or all of a raster image, you can query the data for a cell (pixel), a range of cells, or the entire image associated with a GeoRaster object:
SDO_GEOR.getCellValue returns cell values of one or multiple layers or bands for a specified location.
SDO_GEOR.evaluateDouble evaluates a direct location based on neighboring cell values by using a specified interpolation method, and returns the raster values (double precision numbers) for the specified bands or layers for that location.
SDO_GEOR.getRasterSubset creates a single BLOB object containing all cells of a precise subset of the GeoRaster object (as specified by a rectangular window or a clipping polygon geometry, layer or band numbers, and pyramid level). This BLOB object contains only raster cells and no related metadata.
SDO_GEOR.reproject not only transforms a whole GeoRaster object from one projected coordinate system to another, but can also include the same capability as SDO_GEOR.getRasterSubset by directly transforming the query result (a single BLOB) into a different coordinate system.
SDO_GEOR.getRasterData creates a single BLOB object containing all cells of the GeoRaster object at a specified pyramid level. This BLOB object contains only raster cells and no related metadata.
SDO_GEOR.getRasterBlocks returns an object that includes all image data inside or touching a specified window. Specifically, it returns an object of the SDO_RASTERSET collection type that identifies all blocks of a specified pyramid level that are inside or touch a specified window.
You can also use the SDO_GEOR.exportTo procedure to export all or part of a raster image to a BLOB object (binary image format) or to a file of a specified file format type.
To update or change the value of raster cells in a specified window to a single value, you can use the SDO_GEOR.changeCellValue procedure. You can call the SDO_GEOR.updateRaster procedure to update a specified pyramid of a specified area, or the overlapping parts of one GeoRaster object, with a specified pyramid and specified bands or layers of another GeoRaster object. Both the SDO_GEOR.changeCellValue and the SDO_GEOR.updateRaster procedures support all pyramid levels, including the original raster data (that is, pyramid level 0).
Note:If you use any procedure that adds or overwrites data in the input GeoRaster object, you should make a copy of the original GeoRaster object and use the procedure on the copied object. After you are satisfied with the result of the procedure, you can discard the original GeoRaster object if you wish.
If you want to change the raster data table name, the attributes of a GeoRaster object, or any other metadata, see the recommendations, requirements, and restrictions noted in Section 3.10, "Querying and Updating GeoRaster Metadata".
You can perform a variety of processing operations on GeoRaster data, including changing the format, subsetting (cropping), scaling, reprojecting (from one coordinate system to another), generating pyramids, and generating statistics and histograms. Some relevant subprograms are SDO_GEOR.changeFormatCopy, SDO_GEOR.subset, SDO_GEOR.mosaic, SDO_GEOR.reproject, SDO_GEOR.generatePyramid, SDO_GEOR.deletePyramid, SDO_GEOR.scaleCopy, SDO_GEOR.mergeLayers, and SDO_GEOR.generateStatistics.
See also the GeoRaster PL/SQL demo files, described in Section 1.15, for examples and explanatory comments.
You can reduce the storage space requirements for GeoRaster objects by compressing them using JPEG-B, JPEG-F, or DEFLATE compression. You can decompress any compressed GeoRaster object, although this is not required for any GeoRaster operations, because any GeoRaster operation that can be performed on an uncompressed (decompressed) GeoRaster object can be performed on a compressed GeoRaster object.
To compress or decompress a GeoRaster object, use the compression keyword in the
storageParam parameter with the SDO_GEOR.changeFormatCopy procedure, or with several other procedures that load and process a GeoRaster object to create another GeoRaster object, including SDO_GEOR.importFrom, SDO_GEOR.mosaic, SDO_GEOR.scaleCopy, and SDO_GEOR.subset. (There are no separate procedures for compressing and decompressing a GeoRaster object.)
To view GeoRaster objects, you have the following options:
Call the SDO_GEOR.exportTo procedure to export GeoRaster objects to image files, and then display the images using image tools or a Web browser.
Use the standalone GeoRaster viewer tool (one of the tools described in Section 1.14).
With the GeoRaster viewer tool, you can select a GeoRaster object of a database schema (user), query and display the whole or a subset of a GeoRaster object, zoom in and zoom out, scroll, and perform other basic operations. The pyramid level, cell coordinates, and model coordinates (if the object is georeferenced) are displayed for the point at the mouse pointer location. You can display individual cell values and choose different layers of a multiband or hyperspectral image for RGB full color display. The blocking boundaries can be overlapped on the top of the display. Depending on the data and your requests, the viewer can display the raster data in grayscale, pseudocolor, and 24-bit true color over an intranet or the Internet. Some of the basic GeoRaster metadata is also displayed.
The GeoRaster viewer tool provides a set of image processing operators for enhanced display of the GeoRaster objects, especially for those whose cell depth is greater than 8 or is a floating-point number. It can also display and apply bitmap masks on the GeoRaster objects if they have bitmap masks.
The GeoRaster viewer tool also includes menu commands to call the GeoRaster loader and exporter tools, thus enabling you to use a single tool as an interface to the capabilities of all the GeoRaster tools.
To load and export imagery or raster data, always consider third-party ETL tools (see the note in Section 1.14)
If you use features in GeoRaster to export GeoRaster objects to image files, you have the following options:
Before you commit a database transaction that inserts, updates, or deletes GeoRaster cell data or metadata, you should update the GeoRaster object. If you do not update the GeoRaster object after changing cell data, one or more of the following can result: an invalid GeoRaster object, dangling raster data, and inconsistent metadata. If you do not update the GeoRaster object after changing GeoRaster metadata, the metadata changes will not take effect.
If you decide to roll back the transaction instead of committing it, an UPDATE statement is not needed.
DECLARE gr1 sdo_georaster; gr2 sdo_georaster; BEGIN SELECT georaster INTO gr2 from georaster_table WHERE georid=11 FOR UPDATE; SELECT georaster INTO gr1 from georaster_table WHERE georid=1; sdo_geor.changeFormatCopy(gr1, 'blocksize=(2048,2048)', gr2); UPDATE georaster_table SET georaster=gr2 WHERE georid=11; COMMIT; END; /
The SDO_GEOR.createTemplate and SDO_GEOR.getRasterBlockLocator subprograms enable you to develop GeoRaster applications, such as ETL tools and image processing systems that work with GeoRaster objects, by reading and writing GeoRaster metadata and binary raster data without dealing directly with the Oracle XMLType, the GeoRaster XML schema, and Oracle BLOBs.
After you create a new GeoRaster object (explained in Section 3.2), you can use the SDO_GEOR.createTemplate function to populate the metadata of the GeoRaster object with basic information, such as raster type, dimension sizes, ultCoordinates, cell depth, interleaving type, blocking and block size, pyramid resampling method and reducing level, and compression method and quality. This function can optionally populate the raster data table with the correct number of rows and row data consisting of raster blocks containing empty BLOBs.
The XML metadata generated by the SDO_GEOR.createTemplate function conforms to the GeoRaster metadata schema. You can then use other GeoRaster subprogams to query or update the metadata (see Section 3.10).
You can use the SDO_GEOR.getRasterBlockLocator procedure to get the raster block locator by specifying the pyramid level and block number. If you have the raster block locator, you can then use the OCI or Java JDBC LOB interfaces to read and write the binary raster data. (The SDO_GEOR.getRasterBlockLocator procedure does not itself read or process LOB data.) To use this approach, you must understand the physical storage of the raster data (explained in Section 1.4), and you must compress and decompress the data as necessary before reading from or writing to the BLOB.
To use GeoRaster with Oracle Workspace Manager or Oracle Label Security, you must define an object view of SDO_RASTER type and use the object view as the raster storage. The object view must be defined on a single relational table (the base raster data table) that has all the necessary columns and the necessary primary key definition. The following example shows the general form of statements to create the table and the view:
CREATE TABLE <rdt_base_table> ( RASTERID NUMBER, PYRAMIDLEVEL NUMBER, BANDBLOCKNUMBER NUMBER, ROWBLOCKNUMBER NUMBER, COLUMNBLOCKNUMBER NUMBER, BLOCKMBR SDO_GEOMETRY, RASTERBLOCK BLOB, PRIMARY KEY (RASTERID,PYRAMIDLEVEL,BANDBLOCKNUMBER, ROWBLOCKNUMBER,COLUMNBLOCKNUMBER) ) LOB (RASTERBLOCK) STORE AS SECUREFILE(CACHE); CREATE VIEW <rdt_view> OF SDO_RASTER WITH OBJECT OID (RASTERID,PYRAMIDLEVEL,BANDBLOCKNUMBER, ROWBLOCKNUMBER,COLUMNBLOCKNUMBER) AS SELECT RASTERID,PYRAMIDLEVEL,BANDBLOCKNUMBER,ROWBLOCKNUMBER,COLUMNBLOCKNUMBER, BLOCKMBR,RASTRBLOCK FROM <rdt_base_table>;
Use the name of the object view to create GeoRaster objects. For example (general format):
INSERT INTO georaster_table (georid, georaster) VALUES (0, SDO_GEOR.init(<rdt_view>));
The name of the object view is used in the RDT_TABLE_NAME column of the GeoRaster system data views (see Section 2.4). Grant the same privileges on the object view as you would for a raster object table. For example (general format)
GRANT SELECT,INSERT,UPDATE,DELETE on <rdt_view> TO SCOTT;
With Workspace Manager, you can conveniently manage changes to the raster data by saving different raster data versions and making modifications in different workspaces. To use GeoRaster with Workspace Manager, you must use raster data views for raster storage and version-enable the underlying base raster data tables. For example (general format):
EXECUTE DBMS_WM.EnableVersioning (<rdt_base_table>, 'VIEW_WO_OVERWRITE');
Note:You can version-enable only raster data tables. Do not version-enable any GeoRaster tables, where GeoRaster objects are stored, and do not perform any operations that will require a GeoRaster table to be modified while you are in a workspace.
After you version-enable a base RDT, you can use the subprograms in the DBMS_WM package to manage changes to the raster data. If you need to directly modify a raster block, call the DBMS_WM.copyForUpdate procedure before the operation, as shown in the following example:
declare geor sdo_georaster; cond varchar2(1000); lb blob; r1 raw(1024); amt number; begin r1 := utl_raw.copies(utl_raw.cast_to_raw('0'),1024); select georaster into geor from georaster_table where georid=1; cond := 'rasterId=' || geor.rasterId || ' AND pyramidLevel=0 AND ' || ' bandBlockNumber=0 AND rowBlockNumber=0 AND columnBlockNumber=0'; dbms_wm.copyForUpdate(geor.rasterDataTable, cond); sdo_geor.getRasterBlockLocator(geor, 0, 0, 0, 0, lb, null, 'TRUE'); amt := 1024; dbms_lob.write(lb, amt, 1, r1); end; /
However, if you modify raster data using GeoRaster subprograms, you do not need to call the DBMS_WM.copyForUpdate procedure beforehand.
For information about Workspace Manager, see Oracle Database Workspace Manager Developer's Guide.
Oracle Label Security provides row-level access control for sensitive data based on a user's level of security clearance. To use GeoRaster with Label Security, follow these basic steps:
Create the GeoRaster table, RDT base table or tables, and an object view of SDO_RASTER type for each RDT.
Create an Oracle Label Security policy and define the label components.
Create labeling functions for the GeoRaster table and the RDT base table or tables.
The labels for rows in a GeoRaster table should be generated according to the application's requirements. Use the same label for both the row that stores a GeoRaster object and for the GeoRaster object's raster rows in the associated RDT base table; otherwise, the GeoRaster objects might be invalid or have an inconsistent status.
The following example creates the labeling function for an RDT base table:
CREATE OR REPLACE FUNCTION gen_rdt_label(rdt_view_name varchar2, rid number) RETURN LBACSYS.LBAC_LABEL AS tabname varchar2(80); schema varchar2(32); grcol varchar2(1024); colname varchar2(30); label NUMBER; BEGIN EXECUTE IMMEDIATE 'SELECT v.owner, v.table_name, v.column_name grcol, p.column_name ' || ' FROM all_sdo_geor_sysdata v, all_sa_policies p, all_sa_table_policies t ' || ' WHERE v.rdt_table_name=:1 AND v.raster_id=:2 AND ' || ' v.owner=t.schema_name AND v.table_name=t.table_name AND ' || ' p.policy_name=t.policy_name ' INTO schema, tabname, grcol, colname USING upper(rdt_view_name), rid; EXECUTE IMMEDIATE 'SELECT t.' || colname || ' FROM ' || schema || '.' || tabname || ' t ' || ' WHERE t.' || grcol || '.rasterdatatable=:1 AND ' || ' t.' || grcol || '.rasterid=:2' INTO label USING upper(rdt), rid; RETURN LBACSYS.LBAC_LABEL.NEW_LBAC_LABEL(label); END; /
Apply the Label Security policy to a GeoRaster table and its associated RDT base table or tables.
The following example (general format) applies a Label Security policy to an RDT base table using the labeling function example from the preceding step.
BEGIN SA_POLICY_ADMIN.REMOVE_TABLE_POLICY(<policy_name>,<schema_name>,<rdt_base_table>); SA_POLICY_ADMIN.APPLY_TABLE_POLICY( POLICY_NAME => <policy_name>, SCHEMA_NAME => <schema_name>, TABLE_NAME => <rdt_base_table>, TABLE_OPTIONS => 'READ_CONTROL,WRITE_CONTROL,CHECK_CONTROL', LABEL_FUNCTION => '<schema_name>.gen_rdt_label(<rdt_view>,:new.rasterid)', PREDICATE => NULL); END; /
Create and authorize users, and complete other administrative tasks related to Label Security.
You can load GeoRaster data before or after applying the policy to the tables.
The ALL_SDO_GEOR_SYSDATA view (described in Section 2.4) contains system data for all GeoRaster objects accessible by the current user, and accessibility in this case is determined by the user's privileges as defined in the context of discretionary access control (DAC).
After the label for a GeoRaster table row is updated, ensure that the related data labels in the base RDT are updated, so that the labels are synchronized.
For information about Label Security, see Oracle Label Security Administrator's Guide.
After delete or rollback operations, unused space allocated to a raster data table might not be promptly returned to the underlying tablespace. This could result in wasted tablespace area, and it can be a significant issue if the amount of raster data is large. If the raster data table is created using BasicFile LOBs in an automatic segment space management tablespace, you can explicitly shrink the
rasterBlock LOB segment or the raster data table by altering the raster data table, as shown in Example 3-6 and Example 3-7.
ALTER TABLE city_images_rdt MODIFY LOB (rasterBlock) (SHRINK SPACE);
ALTER TABLE city_images_rdt ENABLE ROW MOVEMENT; ALTER TABLE city_images_rdt SHRINK SPACE CASCADE;
If you are using SecureFiles, or if you are using BasicFiles allocated in a manual segment space management tablespace, you cannot reclaim unused space using the ALTER TABLE statements as shown in the preceding examples. Instead, you should create some working (for temporary use) raster data tables and try to put any intermittent results in these RDTs, and then drop these working RDTs after they are no longer needed.
Although GeoRaster provides internal database mechanism to prevent the creation of invalid GeoRaster objects and system data, sometimes such GeoRaster objects and system data might exist in the database, especially after an upgrade from a previous release, or after some user errors in operations on GeoRaster system data. Examples of such invalid objects and system data include the following:
An entry in the GeoRaster system data views (xxx_SDO_GEOR_SYSDATA, described in Section 2.4) refers to a nonexistent GeoRaster table or column.
Two or more GeoRaster objects have the same pair of RDT name and raster ID values.
Some GeoRaster objects, tables, columns, or RDTs not registered.
An RDT name is not unique.
A GeoRaster object is non-empty or nonblank, but an associated RDT does not exist.
After a database upgrade, you should call the SDO_GEOR_ADMIN.isUpgradeNeeded function to check for any invalid GeoRaster objects and invalid system data for the current version. If there are any errors or invalid data, call the SDO_GEOR_ADMIN.upgradeGeoRaster function to have the problems automatically corrected. If you connect as user MDSYS, the SDO_GEOR_ADMIN.upgradeGeoRaster function upgrades all GeoRaster objects in the database; otherwise, it upgrades only GeoRaster objects in the schema of the current user. (See the reference and usage information about SDO_GEOR_ADMIN.upgradeGeoRaster in Chapter 5.)
For regular maintenance due to possible user errors, several functions and procedures will be helpful in checking for and correcting invalid GeoRaster objects and system data entries:
To check for dangling raster data, call SDO_GEOR_ADMIN.listDanglingRasterData.
To correct all invalid system data entries, call SDO_GEOR_ADMIN.maintainSysdataEntries.
To create correct DML triggers for all GeoRaster columns, call SDO_GEOR_ADMIN.registerGeoRasterColumns.
To register all existing GeoRaster objects in the sysdata table, call SDO_GEOR_ADMIN.registerGeoRasterObjects.
See the reference and usage information about these procedures and functions in Chapter 5.
You can use either the Data Pump Export and Import utilities or the original Export and Import utilities to transfer GeoRaster data between databases. You must export and import rows from both the GeoRaster table and its related raster data table or tables. After the transfer, you do not need to insert the GeoRaster system data for the imported GeoRaster objects into the USER_SDO_GEOR_SYSDATA view (described in Section 2.4) in the target schema; however, you should use the SDO_GEOR.validateGeoRaster function to check the validity of imported GeoRaster objects before you perform any operations on these objects.
For information about the Data Pump Export and Import utilities and the original Export and Import utilities, see Oracle Database Utilities.
To transfer GeoRaster data between databases, follow these general steps:
Check for and resolve any conflicts, as explained in Section 3.21.1.
Perform the data transfer, as explained in Section 3.21.2.
For a successful import of GeoRaster data into a target database, there must be no conflicts in the target schema's GeoRaster system data. The following conditions can cause a conflict:
A raster data table with the same name is already defined in another schema in the target database.
For example, you might plan to import a GeoRaster object by creating its raster data table (RDT) in the target schema, but an existing RDT in the target schema might already have the same name. In this case, you should use the SDO_GEOR_ADMIN.listRDT or SDO_GEOR_ADMIN.isRDTNameUnique function to check both source database and target database to see if there are RDT name conflicts; and if there are any conflicts, use the SDO_GEOR_UTL.renameRDT procedure to rename the RDT to a different name in the target database to solve the conflicts before you import the GeoRaster objects.
Any pairs of raster data table name and raster ID to be inserted into the target schema's USER_SDO_GEOR_SYSDATA view are not unique.
For example, if you import RDT data by appending to an existing RDT in the target database, this conflict might occur. In this case, before importing the data into the target database, use the SDO_GEOR_ADMIN.listGeoRasterObjects function to list all GeoRaster objects defined in the target schema, and make sure that there are no conflicts in the combination of RDT name and raster ID between existing GeoRaster data and the GeoRaster data to be imported. If there are any conflicts, change the raster ID of the GeoRaster object in the target schema to resolve the conflicts; otherwise, those GeoRaster objects with conflicts in the dump file will get rejected when you perform import process.
If you need to check the raster data table (RDT) name and raster ID (RID) information in the dump file, you have the following options: check the information in the source database; request the information from the provider of the dump file; load the dump file into a separate test database and check the information there; or (if you cannot use a separate database for testing) load the dump file into a test schema in the current database and check the information. To load the dump file into a test schema in the current database and check the information, follow these steps:
Create a test schema in the target database.
Load all GeoRaster tables into this test schema from the dump file, using the Data Pump Import utility with the
CONTENT = METADATA_ONLY parameter.
Connect to the database as the MDSYS user, and disable all DML triggers on the GeoRaster tables that were loaded in the preceding step.
Load the data into the GeoRaster tables, using the Data Pump Import utility with the
CONTENT = DATA_ONLY parameter.
Retrieve the RDT/RID (raster data table name and raster ID) pairs directly from the GeoRaster tables in the test schema.
After you resolve conflicts, you should ensure the integrity of GeoRaster metadata and data (see Section 3.20). You should also validate any fixed GeoRaster objects before performing a commit or any other operation.
For general information about resolving conflicts during import operations, see the description of the
TABLE_EXISTS_ACTION parameter in the Data Pump Import chapter of Oracle Database Utilities.
When you export GeoRaster data from one database and import it into another, the GeoRaster database management system ensures that the necessary DML triggers and system data entries are automatically generated after the GeoRaster tables and objects are imported into the target database.
To export GeoRaster data, do as you would for other types of data. For example:
expdp scott schemas=scott directory=dump_dir dumpfile=exp.dmp Enter password: password
To import GeoRaster data, do as you would for other types of data, but exclude the GeoRaster internal DML triggers. For example:
Ensure that no conflicts exist between the GeoRaster data to be imported and the existing GeoRaster data in the target database, as explained in Section 3.21.1.
If any conflicts are not resolved, some exceptions will be raised and only non-conflicted GeoRaster data will be imported into the target database.
Import GeoRaster data as you would for other types of data, but exclude the GeoRaster internal DML triggers (whose names start with
GRDMLTR_). For example:
impdp scott schemas=scott directory=dump_dir dumpfile=exp.dmp parfile=exclude.par Enter password: password
exclude.par file contains the following:
You can use the Oracle Database transportable tablespaces feature with GeoRaster data.
If a tablespace to be transported contains any spatial indexes on the GeoRaster tables or raster data tables (RDTs), you may have to take some preparatory steps. See the Usage Notes for the SDO_UTIL.PREPARE_FOR_TTS and SDO_UTIL.INITIALIZE_INDEXES_FOR_TTS procedures in Oracle Spatial Developer's Guide for more information about using the transportable tablespace feature with spatial data.
For a successful import of GeoRaster data into a target database, there must be no conflicts in the target schema's GeoRaster system data. Before you transport the tablespace to another database or schema, it is recommended (but not required) that you check for and resolve such conflicts by following the procedure described in Section 3.21.1. For this reason, you should design GeoRaster tables and RDT tables so as to avoid such foreseeable conflicts before you use such transportable tablespaces in the source database.
Regardless or whether a transported tablespace has any spatial indexes, after transporting the tablespace that contains GeoRaster objects, do the following:
Before you use the transported GeoRaster data, perform the "regular maintenance" operations described in Section 3.20, to maintain GeoRaster objects and system data and to ensure all GeoRaster objects are correctly transported and properly registered.
For detailed information about transportable tablespaces and transporting tablespaces to other databases, see Oracle Database Administrator's Guide.