|Oracle® Database Gateway for APPC User's Guide
11g Release 2 (11.2)
|PDF · Mobi · ePub|
This chapter discusses how you will call a TIP and control a remote host transaction if your gateway uses TCP/IP support for IMS Connect. It also provides you with the steps for preparing and executing a gateway transaction.
This chapter assumes:
a remote host transaction (RHT) has already been written
a TIP corresponding to the RHT has already been defined using the steps described in Chapter 3, "Creating a TIP".
This chapter contains the following sections:
The Procedural Gateway Administration Utility (PGAU) generates a complete TIP using definitions you provide. The client application can then call the TIP to access the remote host transaction. Chapter 2, "Procedural Gateway Administration Utility", discusses the use of PGAU in detail.
This overview explains what you must do in order to call a TIP and control a remote host transaction.
The following application programs make this possible:
PGAU generates the TIP specification for you. In the shipped samples, the PGAU-generated package is called
pgtflip.pkb. This generated TIP includes at least three function calls that map to the remote transaction program:
pgtflip_init initializes the conversation with the remote transaction program
pgtflip_main exchanges application data with the remote transaction program
pgtflip_term terminates the conversation with the remote transaction program
Refer to Appendix E, "Tip Internals" for more information about TIPs, if you are writing your own TIP or debugging.
a client application that calls the TIP
The client application calls the three TIP functions with input and output arguments. In the example, the client application passes an input and the remote transaction and the remote transaction sends back the flipped input as an output.
Table 7-1 demonstrates the logic flow between the PL/SQL driver, the TIP, and the gateway using the example IMS Connect-IMS transaction.
|Client Application||Oracle TIP||Procedures Established Between the Gateway and the Remote Transaction (mainframe IMS)|
Gateway issues TCP/IP socket and connect to initiate the conversation with IMS Connect.
Gateway issues TCP/IP send() to IMS Connect. IMS Connect, through OTMA and XCF, talks to the IMS instance. IMS
Gateway issues TCP/IP close().
A client application which utilizes the gateway to exchange data with a remote host transaction performs some tasks for itself and instructs the TIP to perform other tasks on its behalf. The client application designer must consequently know the behavior of the remote transaction and how the TIP facilitates the exchange.
The following sections provide an overview of remote host transaction behavior, how this behavior is controlled by the client application and how TIP function calls and data declarations support the client application to control the remote host transaction. These sections also provide background information about what the TIP does for the client application and how the TIP calls exchange data with the remote host transaction.
To prepare the client application for execution you must understand the remote host transaction requirements and then perform these steps:
Make sure that the pg4tcpmap tool has been used to map the
SIDEPROFILE name, defined in the
.ctl file for the PGAU utility, to TCP/IP and IMS Connect attributes.
Refer to Chapter 6, "PG4TCPMAP Commands (TCP/IP Only)" in this guide for detailed information about mapping parameters.
Make certain that you have identified the remote host transaction program facilities to be called.
Generate the TIP in the Oracle database, using
Create the client application that calls the TIP public functions.
Grant privileges on the newly created package.
The content of a PGAU-generated TIP reflects the calls available to the remote host transaction and the data that has been exchanged. Understanding this content helps when designing and debugging client applications that call the TIP.
A Package Specification containing:
Public function prototypes and parameters, and
A Package Body containing:
Private functions and internal control variables
Package initialization following the last public function.
The purpose of the TIP is to provide a PL/SQL callable public function for every allowed remote transaction program interaction. A remote transaction program interaction is a logically related group of data exchanges through one or more
PGAXFER RPC calls. This is conceptually similar to a screen or menu interaction in which several fields are filled in, the enter key is pressed, and several fields are returned to the user. Carrying the analogy further:
the user might be likened to the TIP or client application
fields to be filled in are
IN parameters on the TIP function call
fields returned are
OUT parameters on the TIP function call
screen or menu is the group of
OUT parameters combined
a pressed enter key is likened to the
PGAXFER remote procedural call (RPC)
The actual grouping of parameters that constitute a transaction call is defined by the user. The gateway places no restrictions on how a remote transaction program might correspond to a collection of TIP function calls, each call having many
PGA users typically have one TIP per remote transaction program. How the TIP function calls are grouped and what data parameters are exchanged on each call depends on the size, complexity and behavior of the remote transaction program.
Refer to Oracle's Oracle Database PL/SQL Language Reference for a discussion of how PL/SQL packages work. The following discussion covers the logic that must be performed within a TIP. Refer to the sample TIP and driver supplied in the
%ORACLE_HOME%\dg4appc\demo\IMS directory on Microsoft Windows and in
$ORACLE_HOME/dg4appc/demo/IMS directory on UNIX based systems, in files
From a database gateway application perspective, there are three main types of remote host transactions:
You should be familiar with the remote host transaction types. Refer to the IBM IMS Connect Guide and Reference for a full description of these transaction types.
Parameter datatype conversion, which results from the way in which transaction DATA is defined. Refer to Appendix D, "Datatype Conversions" for a discussion of how PGAU-generated TIPs convert data based on the data definitions.
TCP/IP send/receive synchronization, which results from the way in which transaction
CALLs are defined
CALL definitions are then included by reference in a
Make certain that the
SIDEPROFILE name has been mapped to TCP/IP and IMS Connect attributes, using the
Using data definitions programmed in the language of the remote host transaction, the PGAU
DEFINE DATA command stores in the PG DD the information needed for PGAU
GENERATE to create the TIP function logic to perform:
all data conversion from PL/SQL
IN parameters supplied by the receiving remote host transaction
all buffering into the format expected by the receiving remote host transaction
all data unbuffering from the format supplied by the sending remote host transaction
all data conversion to PL/SQL
OUT parameters supplied by the sending remote host transaction
PGAU determines the information needed to generate the conversion and buffering logic from the data definitions included in the remote host transaction program. PGAU
DEFINE DATA reads this information from files, such as COBOL copy books, or in-stream from scripts and saves it in the PG DD for repeated use. The Gateway Administrator needs to transfer these definition files from the remote host to the Oracle host where PGAU runs.
From the data definitions stored in the PG DD, PGAU
GENERATE determines the remote host datatype and matches it to an appropriate PL/SQL datatype. It also determines data lengths and offsets within records and buffers and generates the needed PL/SQL logic into the TIP. Refer to the PGAU "DEFINE DATA" statement in Chapter 2, "Procedural Gateway Administration Utility" and "Sample PGAU DEFINE DATA Statements" in Appendix F, "Administration Utility Samples" for more information.
All data that are referenced as parameters by subsequent calls must first be defined using PGAU
DEFINE DATA. Simple data items, such as single numbers or character strings, and complex multi-field data aggregates, such as records or structures, can be defined. PGAU automatically generates equivalent PL/SQL variables and records of fields or tables for the client application to reference in its calls to the generated TIP.
As discussed, a parameter might be a simple data item, such as an employee number, or a complex item, such as an employee record. PGAU
DEFINE DATA automatically extracts the datatype information it needs from the input program data definition files.
In this example,
FLIPOUT are the arguments to be exchanged.
DEFINE DATA statement must therefore be issued for each of these parameters:
DEFINE DATA FLIPIN PLSDNAME (FLIPIN) USAGE (PASS) LANGUAGE (IBMVSCOBOLII) ( 01 MSGIN PIC X(20). ); DEFINE DATA FLIPOUT PLSDNAME (flipout) USAGE (PASS) LANGUAGE (IBMVSCOBOLII) ( 01 MSGOUT PIC X(20). );
Note that a definition is not required for the
trannum argument. This is the APPC conversation identifier and does not require a definition in PGAU.
The requirement to synchronize TCP/IP send() and receive() means that when the remote transaction program expects data parameters to be input, it issues TCP/IP receive() to read the data parameters. Accordingly, the TIP must cause the gateway to issue TCP/IP send() to write the data parameters to the remote transaction program. The TIP must also cause the gateway to issue TCP/IP receive() when the remote transaction program issues TCP/IP send().
DEFINE CALL statement specifies how the generated TIP is to be called by the client application and which data parameters are to be exchanged with the remote host transaction for that call. Each PGAU
DEFINE CALL statement might specify the name of the TIP function, one or more data parameters, and the
IN/OUT mode of each data parameter. Data parameters must have been previously defined with PGAU
DEFINE DATA statements. Refer to "DEFINE CALL" in Chapter 2, "Procedural Gateway Administration Utility" and "Sample PGAU DEFINE CALL Statements" in Appendix F for more information.
DEFINE CALL processing stores the specified information in the PG DD for later use by PGAU
GENERATE then creates the following in the TIP package specification:
declarations of public PL/SQL functions for each
CALL defined with PL/SQL parameters for each
DATA definition specified on the
declarations of the public PL/SQL data parameters
The client application calls the TIP public function as a PL/SQL function call, using the function name and parameter list specified in the PGAU
DEFINE CALL statement. The client application might also declare, by reference, private variables of the same datatype as the TIP public data parameters to facilitate data passing and handling within the client application, thus sharing the declarations created by PGAU
In this example, the following PGAU
DEFINE CALL statement must be issued to define the TIP public function:
DEFINE CALL FLIPMAIN PKGCALL (pgtflip_main) PARMS ((FLIPIN IN),(FLIPOUT OUT));
The number of data parameters exchanged between the TIP and the gateway on each call can vary at the user's discretion, as long as the remote transaction program's
SEND/RECEIVE requests are satisfied. For example, the remote transaction program data exchange sequence might be:
TCP/IP SEND 5 fields (field1-field5) TCP/IP RECEIVE 1 fields (field6) TCP/IP SEND 1 field (field7) TCP/IP RECEIVE 3 fields (field8 - field10)
The resulting TIP/application call sequence could be:
tip_call1(parm1 OUT, <-- TCP/IP SEND field1 from remote TP parm2 OUT, <-- TCP/IP SEND field2 from remote TP parm3 OUT); <-- TCP/IP SEND field3 from remote TP tip_call2(parm4 OUT, <-- TCP/IP SEND field4 from remote TP parm5 OUT); <-- TCP/IP SEND field5 from remote TP tip_call3(parm6 IN OUT); --> TCP/IP RECEIVE field6 in remote TP <-- TCP/IP SEND field7 from remote TP tip_call4(parm8 IN, --> TCP/IP RECEIVE field8 into remote TP parm9 IN, --> TCP/IP RECEIVE field9 into remote TP parm10 IN); --> TCP/IP RECEIVE field10 into remote TP
To define these four public functions to the TIP, four PGAU
DEFINE CALL statements must be issued, each specifying its unique public function name (
tip_callx) and the data parameter list to be exchanged. Once a data item is defined using
DEFINE DATA, it can be referenced in multiple calls in any mode (
IN OUT). For example,
parm5 could be used a second time in place of
parm6 This implies the same data is being exchanged in both instances, received into the TIP and application on
tip_call2 and returned, possibly updated, to the remote host in
Notice also that the remote transaction program's first five written fields are read by two separate TIP function calls,
tip_call2. This could also have been equivalently accomplished with five TIP function calls of one
OUT parameter each or a single TIP function call with five
OUT parameters. Then the remote transaction program's first read field (
field6) and subsequent written field (
field7) correspond to a single TIP function call (
tip_call3) with a single
IN OUT parameter (
This use of a single
IN OUT parameter implies that the remote transaction program's datatype for
field7 are both the same and correspond to the conversion performed for the datatype of
field7 were of different datatypes, then they have to correspond to different PL/SQL parameters (for example,
parm6 IN and
parm7 OUT). They could still be exchanged as two parameters on a single TIP call or one parameter each on two TIP calls, however.
Lastly, the remote transaction program's remaining three
RECEIVE fields are supplied by
tip_call4 parameters 8-10. They also could have been done with three TIP calls passing one parameter each or two TIP calls passing one parameter on one call and two parameters on the other, in either order. This flexibility permits the user to define the correspondence between the remote transaction program's operation and the TIP function calls in whatever manner best suits the user.
Each TIP public function first sends all
IN parameters, before it receives any
OUT parameters. Thus, a remote transaction program expecting to send one field and then receive one field must correspond to separate TIP calls.
tip_callO( parmO OUT); <-- TCP/IP SEND outfield from remote TP
PGAXFER RPC checks first for parameters to send, but finds none and proceeds to receive parameters:
tip_callI( parmI IN); --> TCP/IP RECEIVE infield to remote TP
PGAXFER RPC processes parameters to send and then checks for parameters to receive, but finds none and completes; therefore, a single TIP public function with an
OUT parameter followed by an
IN parameter does not work, because the
IN parameter is processed first--regardless of its position in the parameter list.
transaction ID or name
network address or location
system type (such as IBM370)
Oracle National Language of the remote host
Note:The PL/SQL package name is specified when the transaction is defined; this is the name by which the TIP is referenced and which the public function calls to be included within the TIP. Each public function must have been previously defined with a PGAU
DEFINE CALLstatement, which has been stored in the PG DD. If you do not specify a package name (TIP name) in the
GENERATEstatement, the transaction name you specified will become the package name by default. In that case, the transaction name (
tname)must be unique and must be in valid PL/SQL syntax within the database containing the PL/SQL packages.
For more information, refer to "DEFINE TRANSACTION" in Chapter 2, "Procedural Gateway Administration Utility" and "Sample PGAU DEFINE TRANSACTION Statement" in Appendix F, "Administration Utility Samples".
DEFINE TRANSACTION IMSFLIP CALL (FLIPMAIN) SIDEPROFILE(PGATCP) TPNAME(FLIP) NLS_LANGUAGE("american_america.us7ascii");
Once a TIP is created, a client application must be written to interface with the TIP. A client application that calls the TIP functions must include five logical sections:
declaring TIP variables
initializing the conversation
terminating the conversation
When passing PL/SQL parameters on calls to TIP functions, the client application must use the exact same PL/SQL datatypes for TIP function arguments as are defined by the TIP in its specification section. Assume, for example, the following is in the TIP specification, or
FUNCTION tip_call1 tranuse, IN BINARY_INTEGER, tip_var1 io_mode pls_type1, tip_record io_mode tran_rectype) RETURN INTEGER; TYPE tran_rectype is RECORD (rec_field1 pls_type1, ... rec_fieldN pls_typeN);
Where Table 7-2 provides a description of each of the parameters:
The TIP function name as defined in the package specification.
The remote transaction instance parameter returned from the TIP init function identifying the conversation on which this TIP call is to exchange data.
The PL/SQL record datatype declared in the
Is a PL/SQL atomic datatype.
Is a PL/SQL record field corresponding to a remote transaction program record field.
In the client application PL/SQL atomic datatypes should be defined as the exact same datatype of their corresponding arguments in the TIP function definition. The following should be coded in the client application before the
appl_var pls_type1; /* declare appl variable for .... */
TIP datatypes need not be redefined. They must be declared locally within the client application, appearing in the client application before the
appl_record tipname.tran_rectype; /* declare appl record */
Table 7-3 describes the meaning of each procedure declaration:
Is a PL/SQL record exchanged with the TIP and used within the client application.
Is the PL/SQL package (TIP) name as stored in Oracle database. This is the same value as in the statement
Is the PL/SQL record datatype declared in the
Refer to the
.doc content file for a complete description of the user declarations you can reference.
The client application calls the TIP public function as if it were any local PL/SQL function:
rc = tip_call1( tranuse, appl_var, appl_record);
In the TCP/IP IMS Connect example, the PL/SQL driver
pgtflipd.sql, which is located in
%ORACLE_HOME%\dg4appc\demo\IMS directory on Microsoft Windows and in
$ORACLE_HOME/dg4appc/demo/IMS directory on UNIX based systems, is the client application and includes the following declaration:
... ... CREATE or REPLACE PROCEDURE pgtflipd(mesgin IN CHAR) IS trannum INTEGER :=0 /* transaction usage number */ mesgout VARCHAR2(254); /* the output parameter */ rc INTEGER :=0 /* PGA RPC return codes */ term INTEGER :=0; /* 1 if pgtflip_term called */ ... ...
To cause the PL/SQL package, the TIP, to be loaded and to perform the initialization logic programmed in the TIP initialization section.
To cause the TIP init function to call the
PGAINIT remote procedural call (RPC), which in turn establishes communication with the remote transaction program (RTP), and returns a transaction instance number to the application.
Optionally, calls to initialize the conversation can be used to:
Override default RHT/OLTP identification, network address attributes, and conversation security user ID and password.
Specify what diagnostic traces the TIP is to produce. Refer to Chapter 8, "Troubleshooting" for more information about diagnostic traces.
PGAU-generated TIPs provide four different initialization functions that client applications can call. These are overloaded functions which all have the same name, but vary in the types of parameters passed.
Three initialization parameters are passed:
The transaction instance number for RHT socket file descriptor. The
tranuse parameter is required on all TIP initializations.
TIP diagnostic flags for TIP runtime diagnostic controls. The
tipdiag parameter is optional. Refer to Chapter 8, "Troubleshooting" for a discussion of TIP diagnostics.
TIP default overrides for overriding OLTP and network attributes. The
override parameter is optional.
The following four functions are shown as they might appear in the TIP Content documentation file. Examples of client application use are provided later.
TYPE override_Typ IS RECORD ( tranname VARCHAR2(2000), /* Transaction Program */ transync BINARY_INTEGER, /* RESERVED */ trannls VARCHAR2(50), /* RESERVED */ oltpname VARCHAR2(2000), /* Logical Unit */ oltpmode VARCHAR2(2000), /* LOG Mode Entry */ netaddr VARCHAR2(2000), /* Side Profile */ tracetag VARCHAR2(2000), /* gateway trace idtag */ FUNCTION pgtflip_init( /* init standard */ tranuse IN OUT BINARY_INTEGER) RETURN INTEGER; FUNCTION pgtflip_init( /* init override */ tranuse IN OUT BINARY_INTEGER, override IN override_Typ) RETURN INTEGER; FUNCTION pgtflip_init( /* init diagnostic */ tranuse IN OUT BNARY_INTEGER, tipdiag IN CHAR) RETURN INTEGER; FUNCTION pgtflip_init( /* init over-diag */ tranuse IN OUT BINARY_INTEGER, override IN override_Typ, tipdiag IN CHAR) RETURN INTEGER;
This transaction instance number (shown in examples as
tranuse) must be passed to subsequent TIP exchange and terminate functions. It identifies to the gateway on which TCP/IP conversation--and therefore which iteration of a remote transaction program--the data is to be transmitted or communication terminated.
A single client application might control multiple instances of the same remote transaction program or multiple different remote transaction programs, all concurrently. The transaction instance number is the TIP's mechanism for routing the client application call through the gateway to the intended remote transaction program.
It is the responsibility of the client application to save the transaction instance number of each active transaction and pass the correct one to each TIP function called for that transaction.
The client application calls the TIP initialization function as if it were any local PL/SQL function. For example:
... ... trannum INTEGER := 0;/* transaction usage number*/ ... ... BEGIN rc := pgtflip.pgtflip_init(trannum); ... ...
Note that in the preceding example the client application did not specify any remote transaction program name, network connection, or security information. The TIP has such information internally coded as defaults and the client application simply calls the appropriate TIP for the chosen remote transaction program. The client application can, however, optionally override some TIP defaults and supply security information.
You do not need to change any client applications that do not require overrides.
Refer to "DEFINE TRANSACTION" in Chapter 2, "Procedural Gateway Administration Utility" for more information about the
DEFINE TRANSACTION statement.
These PG DD-defined transaction attributes are generated into TIPs as defaults and can be overridden at TIP initialization time. This facilitates the use of one TIP, which can be used with a test transaction or system, and can later be used with a production transaction or system, without having to regenerate the TIP.
tranname can be set to override the value that was specified by the
TPNAME parameter of the
DEFINE TRANSACTION statement
netaddr can be set to override the value that was specified by the
SIDEPROFILE parameter of the
DEFINE TRANSACTION statement
In addition to the transaction attributes defined in the PG DD, there are two security-related parameters, conversation security user ID and conversation security password, that can be overridden at TIP initialization time. The values for these parameters normally come from either the database link used to access the gateway or the Oracle database session. There are cases when the Oracle database user ID is not sufficient for accessing the OLTP system. The user ID and password overrides provide a way to specify those parameters to the OLTP system.
The following overrides are currently supported:
oltpuser can be set to override the user ID used to initialize the conversation with the OLTP
oltppass can be set to override the password used to initialize the conversation with the OLTP
The security overrides have an effect only if
PGA_SECURITY_TYPE=PROGRAM is specified in the gateway initialization file, and the OLTP system is configured to accept a user ID and password on incoming conversation requests.
transync (IMS Connect
trannls (Globalization Support character set) are defined in the override record datatype, but are reserved for future use. The RHT
SYNCLEVEL and Globalization Support name cannot be overridden.
The client application might override the default attributes at TIP initialization for the following reasons:
to start a different version of the RHT (such as production instead of test)
to change the location of the OLTP containing the RHT (if the OLTP was moved due to migration or a switch to backup configuration)
Client applications requiring overrides can use any combination of override and initialization parameters and might alter the combination at any time without regenerating the TIP or affecting applications that do not override parameters.
To override the TIP defaults, an additional client application record variable must be declared as
override_Typ datatype, values must be assigned to the override subfields, and the override record variable must be passed on the TIP initialization call from the client application. For example:
... ... my_overrides pgtflip.override_Typ; -- declaration ... ... my_overrides.oltpname := 'IVTNO'; -- swap to production IMS my_overrides.tranname := 'IVTNV'; -- new transaction name BEGIN rc := pgtflip.pgtflip_init(trannum,my_overrides); -- init ... ...
Within the TIP, override attributes are checked for syntax problems and passed to the gateway server.
The security requirements of the default and overridden OLTPs must be the same because the same gateway server is used in either conversation, as dictated by the database link names in the PGA RPC calls. The gateway server startup security mode is set at gateway server initialization time and passed unchanged to the OLTP at TIP or conversation initialization time.
The client application should pass the transaction instance number, returned from a previous
tip_init call, to identify which remote transaction program is affected and to identify any client application data parameters to be exchanged with the remote transaction program.
In this IMS Connect inquiry example, we pass an employee number and receive an employee record back:
rc = pgtflip.pgtflip_main(trannum, /* transfer data */ mesgin, /* input parameter */ mesgout); /* output parameter*/
The client application calls the TIP termination function as if it were any local PL/SQL function. For example:
... ... term := 1; /* indicate term called */ rc := pgtflip.pgtflip_term(trannum,0); /* terminate normally */ ... ...
After a transaction instance number has been passed on a TIP terminate call to terminate the transaction, or after the remote transaction program has abended, that particular transaction instance number might be forgotten.
The client application should include an exception handler that can clean up any active TCP/IP conversations before the client application terminates. The sample client application provided in
pgtflipd.sql contains an example of exception handling.
Gateway exceptions are reported in the range
PGA 22099. When an exception occurs, the TIP termination function should be called for any active conversations that have been started by prior calls to the TIP initialization function.
EXCEPTION WHEN OTHERS THEN IF term = 0 THEN /* terminate function not called yet */ rc := pgtflip.pgtflip_term(trannum,1); /*terminate abnormally*/ END IF; RAISE;
The remote transaction should also include provisions for error handling and debugging, such as writing debugging information to the IMS temporary storage queue area. Refer to the Oracle Database PL/SQL Language Reference for a discussion of how to intercept and handle Oracle exceptions.
The TIP is a standard PL/SQL package and execute authority must be granted to users who call the TIP from their client application. In this example, we grant execute on the
pgtflip package to user
GRANT EXECUTE ON PGTFLIP TO SCOTT
Refer to the Oracle Database Administrator's Guide for further information.
PGAU need not be modified in order to have a conversation on a gateway using TCP/IP. You use the APPC format of PGAU, but you will map parameters to TCP/IP using the
To map the
DEFINE TRANSACTION parameters using TCP/IP, you must have a valid input within the
PGA_TCP_IMSC table before executing the application. Refer to Chapter 6, "PG4TCPMAP Commands (TCP/IP Only)" for information about setting up and using the mapping tool.
Before executing the client application, ensure that a connection to the host is established and that the receiving partner is available. In this example we use PL/SQL driver
PGTFLIPD to execute the IMS/IMS Connect inquiry. To execute this client application, enter from SQL*Plus:
set serveroutput on execute pgtflipd('hello');
PGAU processes IBM VS COBOLII
PIC G datatypes as PL/SQL
VARCHAR2 variables and generates TIPs which automatically convert the data according to the Oracle
NLS_LANGUAGEs specified for the remote host data and the local Oracle data.
NLS_LANGUAGEs can be specified as defaults for all
PIC G data exchanged by the TIP with the remote transaction (see
DEFINE TRANSACTION ... REMOTE_MBCS or
LOCAL_MBCS). The Oracle
NLS_LANGUAGEs for any individual
PIC G data item can be further overridden (see
REDEFINE DATA ... REMOTE or
DBCS data can be encoded in any combination of supported DBCS character sets. For example, a remote host application which allows different codepages for each field of data in a record is supported by the Oracle Database Gateway MBCS support.
REDEFINE DATA ... REMOTE_LANGUAGE or
PIC X items is also supported. Thus a TIP can perform DBCS or MBCS conversions for specified
PIC X data fields, in addition to SBCS conversions by default for the remaining
PIC X data fields. Default SBCS conversion is according to the
DEFINE TRANSACTION... NLS_LANGUAGE and local Oracle default
LANGUAGE environment values.
When PGAU is generating a TIP, the
PIC G datatypes are converted to PL/SQL
VARCHAR2 datatypes. After conversion by the TIP, received
'PIC G' VARCHAR2s can have a length less then the maximum due to deletion of shift-out and shift-in meta characters, and sent
'PIC G' RAW datatypes will have the shift-out and shift-in characters inserted as required by the remote host character set specified.
This is different from the conversions performed for
PIC X data which is always a known fixed-length and hence
CHAR datatypes are used in TIPs for
PIC X data fields. However, even when the
PIC X field contains DBCS or MBCS data, a
CHAR variable is still used and padded with blanks if needed.
Some remote host applications bracket a
PIC G field with
PIC X bytes used for shift-out, shift-in meta-character insertion. Such a COBOL definition might look like:
01 MY_RECORD. 05 SO PIC X. 05 MY_MBCS_DATA PIC G(50). 05 SI PIC X.
This is not processed correctly by PGAU, because all three fields are defined, and consequently treated, as separate data items when conversion is performed.
To be properly processed, the definition input to PGAU should be:
01 MY_RECORD. 05 MY_MBCS_DATA PIC G(51).
REDEFINE DATA statement can redefine the 3-field definition to the 1-field definition by specifying
USAGE(SKIP) on fields
'05 MY_MBCS_DATA PIC G(51).' to redefine
MY_MBCS_DATA. The three
REDEFINE statements can be placed in the PGAU input control file, and thus the remote host definition need not be altered.
Execute privileges must be explicitly granted to callers of TIPs or procedures. This privilege cannot be granted through a role.
Any TIP user wanting to trace a TIP must be granted execute privileges on the rtrace and ptrace procedures. Refer to the "Configuring PGAU" chapter appropriate for your communications protocol in the Oracle Database Gateway for APPC Installation and Configuration Guide for AIX 5L Based Systems (64-Bit), HP-UX Itanium, Solaris Operating System (SPARC 64-Bit), Linux x86, and Linux x86-64, Oracle Database Gateway for APPC Installation and Configuration Guide for Microsoft Windows ,and the Oracle Database Advanced Application Developer's Guide for more information.
On Microsoft Windows:
C:\> sqlplus pgaadmin\pw@database_specification_string SQL> grant execute on pgaadmin.purge_trace to tip_user_userid; SQL> grant execute on pgaadmin.read_trace to tip_user_userid;
On UNIX based systems:
$ sqlplus pgaadmin/pw@database_specification_string SQL> grant execute on pgaadmin.purge_trace to tip_user_userid; SQL> grant execute on pgaadmin.read_trace to tip_user_userid;
After a TIP has been developed, the TIP user must be granted execute privileges on the TIP by the TIP owner. The TIP owner is usually
PGAADMIN, but can be another user who has been granted either the
PGDDGEN roles. For example:
For Microsoft Windows:
C:\> sqlplus tip_owner\pw@database_specification_string SQL> grant execute on tipname to tip_user_userid;
For UNIX based systems:
$ sqlplus tip_owner/pw@database_specification_string SQL> grant execute on tipname to tip_user_userid;
database_specification_string is the Oracle Net identifier for the Oracle database where the gateway
UTL_PG components were installed. This is the same Oracle database where the TIPs are executed and where grants on the TIPs are performed from the TIP owner user ID.
A SQL script for performing these grants is provided in the
%ORACLE_HOME%\\dg4appc\\admin directory for Microsoft Windows and
$ORACLE_HOME/dg4appc/admin in the directory for UNIX based systems. The
pgddausr.sql script performs the grants for private access to the packages by a single TIP user. If private grants are to be used, the
pgddausr.sql script must be run once for each TIP user's user ID.
To run these scripts, use SQL*Plus to connect to the Oracle database as user
PGAADMIN. From SQL*Plus, run the
pgddausr.sql script from the
%ORACLE_HOME%\\dg4appc\\admin directory on Microsoft Windows or
$ORACLE_HOME/dg4appc/admin directory on UNIX based systems. The script performs the necessary grants as previously described. You are prompted for the required user IDs, passwords, and database specification strings. If you are using private grants, repeat this step for each user ID requiring access to the packages.
No script has been provided to perform public grants. To do this, issue the following commands:
For Microsoft Windows:
C:\> sqlplus tip_owner\pw@database_specification_string SQL> grant execute on tipname to PUBLIC;
For UNIX based systems:
$ sqlplus tip_owner/pw@database_specification_string SQL> grant execute on tipname to PUBLIC;