See Also:Chapter 6, "Troubleshooting Oracle Configuration Manager" in Oracle Configuration Manager Installation and Administration Guide for information about some errors that may occur while using Oracle Configuration Manager and tips to troubleshoot these errors
Before performing any of the troubleshooting steps in this appendix, ensure that the system meets the requirements and that you have completed all of the preinstallation tasks specified in Chapter 2.
Read the release notes for the product before installing it. The release notes are available on the Oracle Database 11g DVD. The latest version of the release notes is also available on the Oracle Technology Network Web site:
If you run Oracle Universal Installer on a remote system and you want to display Oracle Universal Installer's user interface on your local system, you might see error messages similar to the following:
"Failed to connect to server" "Connection refused by server" "Can't open display"
If you see any of these error messages, follow these steps:
Note:This procedure applies only to users of UNIX workstations. If you are using a PC or other system with X server software installed, contact your X server vendor, system administrator, or refer to the X server documentation for information about how to permit remote systems to display X applications on the local system.
In a local terminal window, log in as the user that started the X Window session.
Enter the following command:
$ xhost fully_qualified_remote_host_name
$ xhost somehost.us.example.com
Enter the following commands, where
workstation_name is the host name or IP address of your workstation:
Bourne, Bash, or Korn shell:
$ DISPLAY=workstation_name:0.0 $ export DISPLAY
% setenv DISPLAY workstation_name:0.0
To determine if an X Window application displays correctly on the local system, enter the following command:
The X clock should appear on your monitor.
If the X clock appears, close the X clock and start Oracle Universal Installer again.
See Also:PC-X Server or operating system vendor documents for further assistance
If you run the installation from a remote terminal, or if you use an
su command to change users you might receive an error similar to the following:
Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo
This can occur if the
DISPLAY variable is not set, or the user running the installation is not authorized to open an X window. For instance, if you use an
su command to change from a user that is authorized to open an X window to a user account that is not authorized to open an X window on the display, such as a lower-privileged user opening windows on the
root user's console display.
To troubleshoot this issue, run the command
echo $DISPLAY to ensure that the display variable is set to the correct visual or to the correct host. If the display variable is set correctly then either ensure that you are logged in as the user authorized to open an X window, or run the command
xhost + to allow any user to open an X window.
If you encounter an error during installation:
Do not exit Oracle Universal Installer.
If you click Next after you enter incorrect information on one of the installation screens, click Back to return to the screen and correct the information.
If you encounter errors while Oracle Universal Installer (OUI) is copying or linking files, then review the installation logs for more information.
For copy file errors review:
/u01/app/oraInventory/logs/timestamp for date of install.log /u01/app/oraInventory/logs/timestamp for date of install.err /u01/app/oraInventory/logs/timestamp for date of install.out
For errors during linking review:
Check the log file for details. Refer to "Reviewing the Log of an Installation Session" section.
If you encounter an error while a configuration assistant is running, refer to "Troubleshooting Configuration Assistants" section.
If you cannot resolve the problem, remove the failed installation by following the steps listed in the "Cleaning Up After a Failed Installation" section.
During an installation, Oracle Universal Installer records all of the actions that it performs in a log file. If you encounter problems during the installation, review the log file for information about possible causes of the problem.
To view the log file, follow these steps:
If necessary, enter the following command to determine the location of the
inventory_loc parameter in this file specifies the location of the
Enter the following command to change directory to Oracle Universal Installer log file directory, where
orainventory_location is the location of the
$ cd /orainventory_location/logs
Enter the following command to determine the name of the log file:
$ ls -ltr
Run these commands to list the files in the order of creation, with the most recent file shown last. Installer log files have names similar to the following, where
date_time indicates the date and the time when the installation started:
installActionsdate_time.log oraInstalldate_time.err oraInstalldate_time.out
To view the most recent entries in the log file, where information about a problem is most likely to appear, enter a command similar to the following:
$ tail -50 installActionsdate_time.log | more
This command displays the last 50 lines in the log file.
If the error displayed by Oracle Universal Installer or listed in the log file indicates a relinking problem, refer to the following file for more information:
roothas.pl command flags
-force enables you to deconfigure Oracle Restart without removing installed binaries. This feature is useful if you encounter an error during an Oracle Grid Infrastructure for a standalone server installation, when running the
root.sh command, such as a missing operating system package. By running
roothas.pl -deconfig -force you can deconfigure Oracle Restart, correct the cause of the error, and then run
Note:Stop any databases, services, and listeners that may be installed and running before deconfiguring Oracle Restart.
To deconfigure Oracle Restart:
Log in as the
Go to the
Grid_home/crs/install directory. For example:
# cd /u01/app/11.2.0/grid/crs/install
roothas.pl with the
-deconfig -force flags. For example:
# roothas.pl -deconfig -force
If you change the host name for Oracle Automatic Storage Management (Oracle ASM), then the Oracle CSS daemon does not start. To solve this issue, perform the following steps:
Login as the
roothas.pl to to deconfigure CSS:
# cd /u01/app/oracle/product/12.1.0/grid/crs/install # perl roothas.pl -deconfig -force
This removes any configuration on the system that referenced the old host name.
root.sh to reconfigure CSS using the new host name:
# cd /u01/app/oracle/product/12.1.0/grid # ./root.sh
Go to the grid home's
srvctl add database command with the
-c SINGLE flag to add the database in an Oracle Restart configuration. Also use the
srvctl add command to add the listener, the Oracle ASM instance, all Oracle ASM disk groups, and any database services to the Oracle Restart configuration.
See Also:"srvctl add" in Oracle Database Administrator's Guide
Review the installation log files listed in the "Reviewing the Log of an Installation Session" section.
Review the specific configuration assistant log file located in the
$ORACLE_HOME/cfgtoollogs directory. Try to fix the issue that caused the error.
If you see the "Fatal Error. Reinstall" message, look for the cause of the problem by reviewing the log files. Refer to "Irrecoverable Errors" for further instructions.
Oracle configuration assistant failures are noted at the bottom of the installation screen. The configuration assistant interface displays additional information, if available. The configuration assistant execution status is stored in the following file:
The execution status codes are listed in the following table:
|Configuration assistant succeeded||0|
|Configuration assistant failed||1|
|Configuration assistant canceled||-1|
If you receive a irrecoverable error while a configuration assistant is running, you must remove the current installation and reinstall the Oracle software, as follows:
Remove the failed installation as described in the "Cleaning Up After a Failed Installation" section.
Correct the cause of the irrecoverable error.
Reinstall the Oracle software.
If you face any of the following situations for Oracle home, then run the
opatch lsinventory -detail command to list the contents of the inventory and see section "Recovering from inventory corruption" in the Oracle Universal Installer and OPatch User's Guide for Windows and UNIX for information about fixing the issue.
Oracle home is cloned without completing the inventory steps.
There is bad inventory.
Inventory is not available but it is created when the Oracle Enterprise Manager Agent is installed in a separate Oracle home.
If you connect to Oracle database with a screen resolution of 640X480 or 800X600, then the Next button in the GUI is not visible as it hides behind the Taskbar. To fix this problem, perform one of the following:
Hide the Taskbar.
Move the Oracle Universal Installer screen up.
Set the screen resolution to 1024X768 or higher.
To determine if a silent-mode installation succeeds or fails, refer to the following log file:
If necessary, refer to the previous section for information about determining the location of the
A silent installation fails if:
You do not specify a response file
You specify an incorrect or incomplete response file
Oracle Universal Installer encounters an error, such as insufficient disk space
Oracle Universal Installer or configuration assistant validates the response file at run time. If the validation fails, the silent-mode installation or configuration process ends.
If an installation fails, you must remove files that Oracle Universal Installer created during the attempted installation using the Deinstallation Tool.
For more information about how to run the Deinstallation Tool see Chapter 7, "Removing Oracle Database Software" and "Troubleshooting and Deconfiguring Oracle Restart"