This figure shows the Playback tab. It contains the following sections: Playback Current Status, Playback Parameters, Event Type List, Playback Filter Entry, Playback Schedule Entry, Change Playback Filter Parameters, and Change Playback Schedule Parameters. The Playback Parameters area contains a DataSet Name text entry field and a Provider Name pull-down menu. The Event Type List contains a Selected event list and an Available event list and a left-pointing arrow and right-point arrow button between the two lists. The Playback Filter Entry area contains a table with columns Filter Start Time and Filter End Time. The Playback Schedule Entry area contains a table with columns Schedule Start Time, Schedule End Time, Speed, and Repeat. The Change Playback Filter Parameters area contains text entry fields Start Recording and Stop Recording. Next to each field is a Calendar button and a time entry menu with hour, minute, and seconds fields. This area also contains a Clear Schedule button. The Change Playback Schedule Parameters area contains text entry fields Start Recording and Stop Recording. Next to each field is a Calendar button and a time entry menu with hour, minute, and seconds fields. This area also contains a a Speed numeric entry field and a Repeat pull-down menu (with value false selected) and a Clear Schedule button. At the bottom of the tab are buttons: Add, Edit, Start, Stop, Save, and Cancel. Only the Start, Save, and Cancel buttons are active.