Skip Headers
Oracle® TimesTen In-Memory Database TimesTen to TimesTen Replication Guide
Release 11.2.1

Part Number E13072-14
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
View PDF

Index

A  B  C  D  E  F  G  H  I  L  M  N  O  P  R  S  T  U  V  W 

A

active database
change to standby, 4.7
detecting dual active masters, 4.8
active standby pair, 6.1
add or drop table column, 6.1
adding host to cluster, 7.6.10
adding or dropping a subscriber, 6.2
adding or dropping cache groups, 6.2
adding sequences and cache groups, 6.2
altering, 6.2
changing PORT or TIMEOUT connection attributes, 6.2
configuring network interfaces, 3.8
create or drop index, 6.1
create or drop synonym, 6.1
defined, 1.5.1
detecting dual active masters, 4.8
disaster recovery, 5.9
dropping sequences and cache groups, 6.2
DSN, 3.2
examples of altering, 6.2.1
failback, 4.4.3, 5.4.3
overview, 1.5.1
recover active when standby not ready, 4.4.2
recovering active database, 4.4
replicating a global AWT cache group, 5.3
replicating a local read-only cache group, 5.2
restrictions, 3.1
return service, 3.6
reverse roles, 4.7
setting up, 4.3
states, 4.1
SUBSCRIBER clause, 3.4
subscriber failure, 4.6
verify that standby has received updates, 13.3.4
active standby pair with cache groups
recover active when standby not ready, 5.4.2
recovering active database, 5.4
subscriber failure, 5.6
ADD ELEMENT clause
DATASTORE, 14.1.2
ADMIN privilege, 3.3, 10.2
aging
replication, 1.9
ALTER ELEMENT clause, 14.1.1
ALTER REPLICATION state
using, 14.1
ALTER TABLE
and replication, 14.2
AppCheckCmd Clusterware attribute, 8.1
AppFailoverDelay Clusterware attribute, 8.1
AppFailureThreshold Clusterware attribute, 8.1
application failover
Oracle Clusterware, 7.2.5
apply threads
active standby pair, 11.2.4
AppName Clusterware attribute, 8.1
AppScriptTimeout Clusterware attribute, 8.1
AppStartCmd Clusterware attribute, 8.1
AppStopCmd Clusterware attribute, 8.1
AppType Clusterware attribute, 8.1
asynchronous writethrough cache group
propagating to Oracle database, 1.6.2
replication, 1.6.1
attributes, connection
required, 11.2.1.1
autocommit
and RETURN RECEIPT BY REQUEST, 10.6.2
and RETURN TWOSAFE BY REQUEST, 10.6.3
RETURN RECEIPT BY REQUEST, 3.6.2
RETURN TWOSAFE BY REQUEST, 3.6.4
autocommit mode
RETURN TWOSAFE, 3.6.3
automatic catch-up, 12.2.3
automatic client failover, 7.1
AutoRecover Clusterware attribute, 8.1
AWT cache group
propagating to Oracle Database, 1.6.2
replicating, 1.6.1, 5.3

B

bidirectional general workload
syntax example, 10.9.6
update conflicts, 10.9.6
bidirectional replication, 1.5.3
bidirectional replication scheme
recovery, 10.1.1
return twosafe service, 10.6.4
bidirectional split workload
syntax example, 10.9.5
bookmarks in log, 11.2.3.3, 13.5

C

cache grid
active standby pairs, 5.3
add cache group with Oracle Clusterware, 7.4.3.1
creating a cluster, 7.4.1
drop cache group with Oracle Clusterware, 7.4.3.2
managing with Oracle Clusterware, 7.4
recovery with Oracle Clusterware, 7.4.2
schema changes with Oracle Clusterware, 7.4.3
cache groups
replicating, 1.6
replicating a global AWT cache group, 5.3
replicating a read-only cache group, 5.2
CacheConnect Clusterware attribute, 7.2.3, 8.1
catch-up feature
replication, 12.2.3
CHECK CONFLICTS clause
examples, 15.3.2
in CREATE REPLICATION statement, 10.4
client failover, 7.1
cluster
virtual IP addresses, 7.1
cluster agent, 7.3.2
cluster manager
role, 10.1.1
cluster status, 7.7
cluster.oracle.ini file, 7.1
advanced availability, 7.2.2
advanced availability, one subscriber, 7.2.2
and sys.odbc.ini file, 7.2
application failover, 7.2.5, 7.2.5
attribute descriptions, 8
automatic recovery from failure of both master nodes, 7.2.6
basic availability, 7.2.1
basic availability, one subscriber, 7.2.1
cache grid, 7.2.4
cache groups, 7.2.3
examples, 7.2
excluding tables, cache groups and sequences, 7.2.7
location, 7.2
manual recovery from failure of both master nodes, 7.2.6
specify route, 7.2.7
Windows example, 7.2.5
Clusterware
required privileges, 7.1.2
COMPRESS TRAFFIC clause
in CREATE ACTIVE STANDBY PAIR statement, 3.7.3
in CREATE REPLICATION statement, 10.7, 10.7.3
configuring replication, 10.1
configuring the network, 11.1
conflict report
XML Document Type Definition, 15.5
conflict reporting, 15.4
CONFLICT REPORTING clause
in CREATE REPLICATION statement, 10.7
conflict resolution, 15.1
update rules, 15.2
conflict types, 15.1
controlling replication, 11.6
copying a database
privileges, 4.2, 11.2.2
copying a master database, 11.2.2
CREATE ACTIVE STANDBY PAIR statement, 4.3, 5.2
syntax, 3.3
create or drop table, 6.1
CREATE REPLICATION statement
defining data store element, 10.3.1
defining table element, 10.3.2
use of, 10.2
crsTT directories, 7.1.3

D

data source name, 10.2.2
data store element, 10.3.1
data types
size limits, 3.5, 11.2.1.2
database
duplicating, 11.2.2
failed, 3.7.5
ForceConnect connection attribute, 12.2.3
database name, 10.2.2
database objects
excluding from active standby pair, 3.9
DatabaseCharacterSet data store attribute, 11.2.1.1
DatabaseFailoverDelay Clusterware attribute, 8.1
databases
establishing, 11.2.1
failed, 10.7.5
managing logs, 11.2.3
recovering, 10.1.1
required connection attributes for replication, 11.2.1.1
setting state, 11.6
DATASTORE element, 10.3
adding to replication scheme, 14.1.2
and materialized views, 10.3.4
and nonmaterialized views, 10.3.4
default column values
changing, 14.2
DISABLE RETURN clause
in CREATE REPLICATION statement, 10.7, 10.7
DISABLE RETURN policy, 10.7.2.2.2
active standby pair, 3.7.2.2.2, 3.7.2.2.4
disaster recovery
active standby pair with AWT cache group, 5.9
disaster recovery subscriber
Oracle Clusterware, 7.3.13
distributed workload configuration, 1.5.3.2
recovery issues, 10.1.1
DNS server
UNIX, 11.1.3.2
Windows, 11.1.3.3
DROP REPLICATION statement, 2.2.6, 14.4
dropping replication scheme, 2.2.6, 14.4
DSN
creating, 2.2.1, 11.2.1
define for active standby pair, 3.2
defining, 10.2.2
duplicating a database
privileges, 4.2, 11.2.2
with cache groups, 4.2
duplicating a master database, 11.2.2
DURABLE COMMIT clause
in CREATE REPLICATION statement, 10.7
DURABLE COMMIT policy, 10.7.2.2.4

E

element
data store, 10.3.1
defined, 1.1
ELEMENT descriptions, 10.3
example
replicating tables to different subscribers, 10.9.3
EXCLUDE clause
in CREATE ACTIVE STANDBY PAIR statement, 3.9
EXCLUDE SEQUENCE clause
in ALTER REPLICATION statement, 14.1.2.2
in CREATE REPLICATION statement, 10.3.1
EXCLUDE TABLE clause
in ALTER REPLICATION statement, 14.1.2.2
in CREATE REPLICATION statement, 10.3.1

F

failback, 4.4.3
active standby pair, 5.4.3
failed database
connecting to, 3.7.5, 10.7.5
Failed state
log space, 10.7.5
log threshold, 3.7.5
replication, 11.6
failover and recovery
issues, 10.1.1
FAILTHRESHOLD attribute, 12.2.1
FAILTHRESHOLD clause
active standby pair, 3.7.2.2.1
altering, 14.1.12
example, 10.9.2
in CREATE ACTIVE STANDBY PAIR statement, 3.7.5
in CREATE REPLICATION statement, 10.7, 10.7.2.2.1, 10.7.5
subscriber failures, 12.2.1
failure
return service, 3.7.2.2
subscriber, 4.6, 12.2.1
failure recovery script, 12.5
failure threshold
description, 11.2.3.3
displaying, 13.4.1
example, 10.9.2
subscriber failures, 12.2.1
FailureThreshold Clusterware attribute, 8.1
ForceConnect connection attribute, 12.2.3, 12.2.3, 12.4
foreign keys
replication, 1.8, 10.3.3
full replication, 1.5.2
full store name
active standby pair, 3.4

G

general workload
syntax example, 10.9.6
GridPort Clusterware attribute, 7.2.4, 8.1

H

host name
identifying, 10.3.1, 11.1.3
hostname command, 10.3.1

I

INCLUDE clause
in CREATE ACTIVE STANDBY PAIR statement, 3.9
INCLUDE SEQUENCE clause
in ALTER REPLICATION statement, 14.1.2.1
in CREATE REPLICATION statement, 10.3.1
INCLUDE TABLE
in CREATE REPLICATION statement, 10.3.1
INCLUDE TABLE clause
in ALTER REPLICATION statement, 14.1.2.1
IP addresses
replication, 11.1.3

L

LOCAL COMMIT ACTION clause
active standby pair, 3.7.2.2.5
in CREATE REPLICATION statement, 10.7
LOCAL COMMIT ACTION policy, 10.7.2.2.5
log
locating bookmarks, 11.2.3.3, 13.5
management, 11.2.3
size and persistence, 11.2.3.1
threshold value, 10.7.5, 10.7.5, 11.2.3.3
log failure threshold, 10.7.5
log sequence number, 13.5
log threshold value
active standby pair, 3.7.5
LogBufMB connection attribute, 11.2.3.3, 11.2.3.3
LogFileSize connection attribute, 11.2.3.3
logging, 11.2.3.3
logs
setting the size, 11.2.3.3
LSN, 13.5

M

master catch-up, 12.2.3
master database
defined, 10.2.2
MasterHosts Clusterware attribute, 8.1
MasterStoreAttribute Clusterware attribute, 8.1
MasterVIP Clusterware attribute, 8.1
materialized views
replicating, 10.3.4
monitoring replication, 13

N

network configuration
replication, 11.1
NO RETURN clause
in CREATE ACTIVE STANDBY PAIR statement, 3.6.5
in CREATE REPLICATION statement, 10.6.5
NVARCHAR columns
size limit, 3.5, 11.2.1.2

O

ocrConfig option, 7.3.3
ON DELETE CASCADE clause
replication, 1.8
Oracle Cluster Registry
configuring for TimesTen cluster, 7.3.3
Oracle Clusterware, 7
add cache group to cache grid, 7.4.3.1
add subscriber not managed by Oracle Clusterware, 7.6.7
adding active standby pair to cluster, 7.6.6
adding subscriber to active standby pair, 7.6.4
altering tables and cache groups, 7.6.1
application failure, 7.2.5
AppScriptTimeout attribute, 7.2.5
automatic recovery, 7.2.6
automatic recovery from dual failure, 7.5.5.1
cache grid, 7.2.4
cache grid recovery, 7.4.2
changing cache administration user name or password, 7.6.16
changing internal user name or password, 7.6.16
cluster.oracle.ini and sys.odbc.ini files, 7.2
creating a cluster of cache grid members, 7.4.1
creating or dropping tables and cache groups, 7.6.1
crsTT directories, 7.1.3
drop cache group from cache grid, 7.4.3.2
failure of both master nodes, 7.2.6
failure of more than two master hosts, 7.5.6
GridPort attribute, 7.2.4
host maintenance, 7.6.14
machine room maintenance, 7.6.15
manual recovery for advanced availability, 7.5.5.2
manual recovery for basic availability, 7.5.5.3
message log files, 7.7.2
moving a database to another host, 7.6.13
network maintenance, 7.6.14
rebuild subscriber not managed by Oracle Clusterware, 7.6.8
recovery process, 7.5.1
recovery when RETURN TWOSAFE, 7.5.5.5
remote disaster recovery subscriber, 7.3.13
removing active standby pair from cluster, 7.6.9
removing host from cluster, 7.6.11
removing subscriber from active standby pair, 7.6.5
required privileges, 7.1.2
restricted commands, 7.1.4
rolling upgrade, 7.6.2
routing, 7.2.7
schema changes in cache grid, 7.4.3
status, 7.7
stopping the TimesTen daemon, 7.3.4
storage for backups, 7.2.6
subscriber not managed by Oracle Clusterware, 7.3.14
switching the active and the standby, 7.6.12
TimesTen advanced level, 7.1
TimesTen basic level, 7.1
TimesTen cluster agent, 7.3.4
TimesTen daemon monitor, 7.3.4
tmp directory, 7.1.3
ttDaemonAdmin, 7.3.4
upgrading TimesTen, 7.6.3, 9
using RepDDL attribute, 7.2.7
using with cache grid, 7.4
virtual IP addresses, 7.1
Oracle Clusterware attributes
AppCheckCmd, 8.1
AppFailoverDelay, 8.1
AppFailureThreshold, 8.1
AppName, 8.1
AppScriptTimeout, 8.1
AppStartCmd, 8.1
AppStopCmd, 8.1
AppType, 8.1
AutoRecover, 8.1
CacheConnect, 8.1
conditional, 8.1
DatabaseFailoverDelay, 8.1
FailureThreshold, 8.1
GridPort, 8.1
MasterHosts, 8.1
MasterStoreAttribute, 8.1
MasterVIP, 8.1
optional, 8.1, 8.1
RemoteSubscriberHosts, 8.1
RepBackupDir, 8.1
RepBackupPeriod, 8.1
RepDDL, 7.2.7, 8.1
RepfullbackupCycle, 8.1
required, 8.1, 8.1
ReturnServiceAttribute, 8.1
SubscriberHosts, 8.1
SubscriberStoreAttribute, 8.1
SubscriberVIP, 8.1
TimesTenScriptTimeout, 8.1
VIPInterface, 8.1
VIPNetMask, 8.1
owner name
replication scheme and tables, 10.2.1

P

parallel replication, 11.2.5, 11.2.5
parallel replication attributes, 11.2.1.1
partitions
in a table, 10.7.6
PassThrough connection attribute
and RETURN TWOSAFE, 3.6.3
and RETURN TWOSAFE BY REQUEST, 3.6.4
Pause state
replication, 11.6
performance
logging attributes, 11.2.3.3
replication, 13.8
PORT assignment
active standby pair, 3.7.4
PORT attribute
in CREATE REPLICATION statement, 10.7, 10.7.4
ports
dynamic, 10.7.4
static, 10.7.4
privilege
create a replication scheme, 10.2
create an active standby pair, 3.3
propagation, 1.5.4
example, 10.9.4
PROPAGATOR clause
example, 10.9.4
propagator database
defined, 10.2.2
definition, 1.5.4

R

read-only cache group
replicating, 1.6.3
ReceiverThreads attribute, 11.2.4
recovering failed databases, 10.1.1
recovery
return service, 3.7.2.2
RemoteSubscriberHosts Clusterware attribute, 8.1
RepBackupDir Clusterware attribute, 8.1
RepBackupPeriod Clusterware attribute, 8.1
RepDDL Clusterware attribute, 7.2.7, 8.1
example, 7.2.7
RepfullbackupCycle Clusterware attribute, 8.1
replicated tables
requirements, 11.2.1.2
replicating over a network, 1.5.4, 11.1
replication
across releases, 11.3
aging, 1.9
and ttAdmin, 11.5
bidirectional, 1.5.3
configuring timestamp comparison, 15.3
conflict reporting, 15.4
conflict resolution, 15.1
controlling, 11.6
described, 1.1
design decisions, 10.1
element, 1.1, 10.3
Failed state, 11.6
FAILTHRESHOLD clause in CREATE ACTIVE STANDBY PAIR statement, 3.7.2.2.1
FAILTHRESHOLD clause in CREATE REPLICATION statement, 10.7.2.2.1
foreign keys, 1.8, 10.3.3
gauging performance, 13.5
host IP addresses, 11.1.3
monitoring, 13
multiple threads, 11.2.5
of materialized views, 10.3.4
of sequences, 10.3.5
ON DELETE CASCADE clause, 1.8
parallel, 11.2.5, 11.2.5
Pause state, 11.6
restart policy, 11.5.1, 11.5.1, 11.5.2
return receipt, 1.4.2
Start state, 11.6
starting, 11.5
state, 11.6
Stop state, 11.6
stopping, 11.5
timestamp column maintenance, 15.3.2.1
unidirectional, 1.5.3, 1.5.3
replication agent
defined, 1.3
starting, 2.2.4, 11.5
stopping, 2.2.6, 11.5
replication daemon, see "replication agent"
replication scheme
active standby pair, 1.5.1
applying to DSNs, 11.4
configuring, 10.1
defining, 10.2
examples, 10.9
for cache groups, 1.6
naming, 10.2.1
owner name, 10.2.1
replication schemes
types, 1.5
replication stopped
return services policy, 10.7.2.2.1
replication tracks, 11.2.5
ReplicationApplyOrdering data store attribute, 11.2.5
ReplicationParallelism data store attribute, 11.2.5
ReplicationTrack connection attribute, 11.2.5
repschemes
ttIsql command, 13.4.1
resource
defined, 7.1
restart policy, 11.5.1
restrictions
active standby pairs, 3.1
RESUME RETURN clause
in CREATE REPLICATION statement, 10.7
RESUME RETURN policy, 10.7.2.2.3
active standby pair, 3.7.2.2.3
return receipt
definition, 1.4
RETURN RECEIPT BY REQUEST clause
example, 10.9.2
in CREATE ACTIVE STANDBY PAIR statement, 3.6.2
in CREATE REPLICATION statement, 10.6.2
RETURN RECEIPT clause
active standby pair, 3.6.1
example, 10.9.1, 10.9.2
in CREATE REPLICATION statement, 10.6.1
RETURN RECEIPT failure policy
report settings, 13.4.1
return receipt replication, 1.4.2
RETURN RECEIPTclause
example, 10.9.2
RETURN RECEPT timeout errors, 1.4.2, 10.7
return service
active standby pair, 3.6
failure policy, 3.7.2.2
in CREATE REPLICATION statement, 10.6
performance and recovery tradeoffs, 10.1.2
recovery policy, 3.7.2.2
return service blocking
disabling, 10.7.2.2
return service failure policy, 10.7.2
active standby pair, 3.7.2
return service timeout errors, 3.7.2, 10.7.2
return services policy
when replication stopped, 10.7.2.2.1
RETURN SERVICES WHEN REPLICATION STOPPED clause
in CREATE REPLICATION statement, 10.7
RETURN TWOSAFE
Oracle Clusterware recovery, 7.5.5.5
return twosafe
bidirectional replication scheme, 10.6.4
definition, 1.4
RETURN TWOSAFE BY REQUEST clause
in CREATE ACTIVE STANDBY PAIR statement, 3.6.4
in CREATE REPLICATION statement, 10.6.3
RETURN TWOSAFE clause
in CREATE ACTIVE STANDBY PAIR statement, 3.6.3
in CREATE REPLICATION statement, 10.6.4
RETURN WAIT TIME clause
in CREATE REPLICATION statement, 10.7
ReturnServiceAttribute Clusterware attribute, 8.1
example, 7.5.5.5
roles
reverse, 4.7
ROUTE clause
in CREATE ACTIVE STANDBY PAIR statement, 3.8

S

selective replication, 1.5.2
sequence
adding to replication scheme, 14.1.1
changing element name, 14.1.6
dropping from replication scheme, 14.1.3
SEQUENCE element, 10.3
sequences
replicating, 1.7, 10.3.5
split workload, 1.5.3.1
syntax example, 10.9.5
split workload replication scheme
recovery, 10.1.1
SQLGetInfo function, 10.7.5
checking database state, 3.7.5
monitoring subscriber, 12.2.1
standby database
change to active, 4.7
recover from failure, 4.5, 5.5
verify that updates have been received, 13.3.4
Start state
replication, 11.6
starting the replication agent, 2.2.4, 11.5
status
cluster, 7.7
Oracle Clusterware, 7.7
Stop state
replication, 11.6
stopping the replication agent, 2.2.6, 11.5
STORE attributes
in CREATE ACTIVE STANDBY PAIR statement, 3.7
in CREATE REPLICATION statement, 10.7
subscriber
adding to replication scheme, 14.1.4
dropping from replication scheme, 14.1.5
verifying updates from master, 13.3.4
SUBSCRIBER clause
and return service, 10.6
in CREATE ACTIVE STANDBY PAIR statement, 3.4
subscriber database
defined, 10.2.2
subscriber failure, 4.6, 12.2.1
active standby pair with cache groups, 5.6
SubscriberHosts Clusterware attribute, 8.1
subscribers
maximum number, 10.9.2
SubscriberStoreAttribute Clusterware attribute, 8.1
SubscriberVIP Clusterware attribute, 8.1

T

table
adding to replication scheme, 14.1.1
changing element name, 14.1.6
dropping from replication scheme, 14.1.3
excluding from database, 14.1.2.2
including in database, 14.1.2.1
partitioned, 10.7.6
TABLE DEFINITION CHECKING clause
examples, 10.7.6
in CREATE REPLICATION statement, 10.7
TABLE element, 10.3
table element, 10.3.2
table requirements
active standby pairs, 3.5
replication schemes, 11.2.1.2
tables
altering and replication, 14.2
threshold log setting, 10.7.5, 10.7.5, 11.2.3.3
active standby pair, 3.7.5, 3.7.5
throughput
active standby pair, 11.2.4
timeout
return service for an active standby pair, 3.7.1
TIMEOUT clause
in CREATE REPLICATION statement, 10.7
timestamp
from operating system, 15.2
timestamp column maintenance
by user, 15.3.2.2
system, 15.3.2.1
timestamp comparison
configuring, 15.3
local transactions, 15.2.1
TimesTen cluster agent, 7.3.2, 7.3.4
TimesTen daemon monitor, 7.3.4
TimesTenScriptTimeout Clusterware attribute, 8.1
track
parallel replication, 11.2.5.1
tracks
replication, 11.2.5
TRANSMIT DURABLE clause
in CREATE REPLICATION statement, 10.5
TRANSMIT NONDURABLE clause
and recovery, 12.4
in CREATE REPLICATION statement, 10.5
TRUNCATE TABLE statement, 14.3
truncating a replicated table, 14.3
ttAdmin utility
-ramPolicy option, 12.3.1, 12.3.2
-repPolicy option, 11.5.1
-repStart option, 11.5.1, 11.5.1
-repStop option, 11.5.1
ttCkpt built-in procedure, 11.2.3.2
ttCkptBlocking built-in procedure, 11.2.3.2
ttCRSActiveService process, 7.3.10
ttCRSAgent process, 7.3.4
ttcrsagent.options file, 7.3.2
ttCRSDaemon process, 7.3.4
ttCRSMaster process, 7.3.10
ttCRSStandbyService process, 7.3.10
ttCWAdmin
-beginAlterSchema option, 7.4.3
ttCWAdmin -beginAlterSchema command, 7.4.3
ttCWAdmin -endAlterSchema command, 7.4.3
ttCWAdmin utility, 7.1, 7.2.1
-endAlterSchema option, 7.4.3
ocrConfig option, 7.3.3
-relocate option, 7.6.13
required privileges, 7.1.2
-status option, 7.7
-switch option, 7.6.12
ttcwerrors.log file, 7.7.2
ttcwmsg.log file, 7.7.2
ttDestroy utility, 12.3.1
ttDestroyDataStore built-in procedure, 12.3.2
ttDurableCommit built-in procedure, 3.7.2.1, 10.7.2.1
ttIsql utility
-f option, 11.4
ttRepAdmin -duplicate
privileges, 11.2.2
ttRepAdmin utility
-bookmark option, 13.5.1
-duplicate option, 10.5, 11.2.2, 12.2.3, 12.3.1, 12.3.1, 12.4
privileges for -duplicate options, 4.2
-ramLoad option, 12.3.1, 12.3.1
-receiver -list options, 13.3.1
-self -list options, 13.2.1
-showconfig option, 13.4.2
-state option, 11.6
ttRepDuplicate built-in procedure, 12.3.2
ttRepDuplicateEx C function
privileges, 4.2, 11.2.2
ttReplicationStatus built-in procedure, 13.3.2
ttRepReturnTransitionTrap SNMP trap, 10.7.2.2.2
ttRepStart built-in procedure, 11.5.1, 11.5.2, 14.1
ttRepStop built-in procedure, 11.5.1, 11.5.2, 14.1
ttRepSubscriberStateSet built-in procedure, 11.6
ttRepSubscriberSync built-in procedure, 13.3.4
ttRepSubscriberWait built-in procedure
replicating sequences, 10.3.5
ttRepSyncGet built-in procedure, 3.6.2, 3.6.4, 10.6.3
ttRepSyncSet built-in procedure, 3.6.2, 3.6.4, 3.7, 3.7, 3.7.1, 3.7.2, 3.7.2.2.5, 10.7.1, 10.7.2
and RETURN RECEIPT BY REQUEST, 10.6.2
and RETURN TWOSAFE BY REQUEST, 10.6.2, 10.6.3
different return services, 10.9.2
local action policy, 10.7.2.2.5
overriding LOCAL COMMIT ACTION, 10.7
overriding RETURN WAIT TIME, 10.7
setting return service timeout, 10.7.1
ttRepSyncSubscriberStatus built-in procedure, 13.7
DISABLE RETURN clause, 10.7.2.2.2
ttRepXactStatus built-in procedure, 3.6.1, 10.6.1, 10.7.2.2.5, 13.7
ttRepXactTokenGet built-in procedure, 13.7
TypeMode data store attribute, 11.2.1.1

U

unidirectional replication, 1.5.3
update conflicts
example, 10.9.6
syntax example, 10.9.6
upgrade
TimesTen when using Oracle Clusterware, 9

V

VARBINARY columns
size limit, 3.5, 11.2.1.2
VARCHAR2 columns
size limit, 3.5, 11.2.1.2
VIPInterface Clusterware attribute, 8.1
VIPNetMask Clusterware attribute, 8.1
virtual IP address
Oracle Clusterware, 7.1

W

WINS server
UNIX, 11.1.3.2
Windows, 11.1.3.3