Corporate Info  |  News  |  Solutions  |  Products  |  Partners  |  Services  |  Events  |  Download  |  How To Buy
	http://www.oracle.com/technology/documentation/index.html   |   Site Map   |   Search   |   PDF Files   |   Contact   |   Glossary
Tuxedo Doc Home   |   Messages   |   Catalog List   |   Previous   |   Next

WEBGUI Messages 3100-3199

3100	INFO: Terminating wlisten process
	Description	The wlisten process was terminated by a signal.
	Action	If you purposely terminated wlisten by issuing an operating system command (such as the UNIX kill(1) command), then no action is required. Otherwise, you must determine the reason why a signal was sent to the wlisten process. In some operating systems processes are killed when the system is critically low on resources.
3102	INFO: wlisten starting
	Description	This message signals the start of the wlisten process.
	Action	No action required.
3103	ERROR: Unable to determine license level
	Description	An error occurred while retrieving the current license attributes.
	Action	Check the log for prior messages indicating the cause of the problem. Normally, it means that the product has not been licensed properly.
3106	ERROR: wlisten TUXDIR is not set and no ini file was specified, exiting
	Description	The wlisten process could not determine the location of the Web GUI initialization file because you did not specify the -i option. It attempted to find the default initialization file (which is $TUXDIR/udataobj/webgui/webgui.ini) but could not because the TUXDIR variable was not set in the environment.
	Action	Either use the -i option to specify the initialization file, or set TUXDIR in the environment before running wlisten.
	See Also	wlisten(1)
3107	ERROR: wlisten found no address in initialization file, exiting
	Description	The wlisten process needs to know a network address on which it should listen for incoming connections. It gets this address from the Web GUI initialization file. The NADDR parameter in the initialization file holds the listening address. However, no NADDR parameter could be found.
	Action	Set the NADDR parameter in the Web GUI initialization file before running wlisten.
	See Also	wlisten(1)
3108	WARN: Network device does not exist
	Description	The wlisten process was not able to find a network device in the initialization file. This is not a problem on some operating systems where sockets are used, but this is a problem if TLI is being used.
	Action	If you are using sockets and wlisten seems to work, then no action is required. Otherwise, set the appropriate network device (e.g. /dev/tcp or whatever is required by your operating system) in the Web GUI initialization file DEVICE parameter.
	See Also	wlisten(1)
3112	INFO: Starting server (info)
	Description	The wlisten process is starting a wgated server process to handle a Web GUI connection.
	Action	No action required.
	See Also	wlisten(1)
3113	ERROR: could not start wgated process, errno=errno
	Description	The wlisten process was unable to start a wgated process to handle an incoming Web GUI connection.
	Action	There are many possible reasons for this, including a lack of system resources that makes it impossible to start a new process, or a corruption or mis-installation of the Web GUI wgated executable, or other system-dependent problems. Check your system configuration to ensure you are not near the system limit for processes, and make sure the Web GUI is properly installed.
	See Also	wlisten(1)
3115	ERROR: Failure to get job id of spawned child, error code is: code
	Description	On the AS/400 platform, the wlisten process failed to retrieve the job id of the wgated process which handles communications with the Java management console.
	Action	Check error string given at the end of this error message for further information on what caused the problem.
	See Also	wlisten(1)
3116	ERROR: Failure passing socket to child process, error code is: code
	Description	On the AS/400, there was an error when wlisten attempted to pass a file descriptor to a newly created wgated process.
	Action	Check the error string at the end of the log message to determine the possible reason for the failure.
	See Also	wlisten(1)
3117	ERROR: _e_proc_new_task val Error # val
	Description	Attempt to create a new process for wgated failed.
	Action	Check the error indicated in the log message to determine the possible reason for the failure.