|
|
100 |
ERROR: Couldn't open XA resource manager in default Server::initialize(). tperrno = internalcode | |
|
Description |
The default implementation of |
Action |
Verify configuration of | |
See Also |
| |
101 |
ERROR: Couldn't close XA resource manager in default Server::release(). tperrno = internalcode | |
|
Description |
The default implementation of |
Action |
Consult error codes described for | |
See Also |
| |
103 |
ERROR: TP::servicename_factory() couldn't register factory. Registrar service not available. Check status of FactoryFinder server(s). | |
|
Description |
The register or unregister factory operation failed because the FactoryFinder server or an associated server was not available. |
Action |
Verify that the FactoryFinder and all associated servers are available. | |
See Also |
Administration Guide online document. | |
104 |
ERROR: TP::servicename_factory() cannot proceed due to unexpected problem with Registrar. Check status of FactoryFinder server(s). | |
|
Description |
An internal exception was raised when a factory was being registered or unregistered. |
Action |
Verify that the FactoryFinder and all associated servers are available. | |
See Also |
Administration Guide online document. | |
106 |
ERROR: Invoking request - couldn't get: resource | |
|
Description |
An internal problem was encountered when the specified resource was being retrieved. |
Action |
Contact BEA Customer Support. | |
107 |
ERROR: Invoking request - no context | |
|
Description |
An internal problem was encountered. |
Action |
Contact BEA Customer Support. | |
108 |
ERROR: Invoking request - unexpected exception | |
|
Description |
An internal problem was encountered. |
Action |
Contact BEA Customer Support. | |
128 |
ERROR: Process could not detach from bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact your BEA system Technical Support. | |
See Also |
| |
129 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
130 |
ERROR: Process could not detach from bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
131 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
132 |
ERROR: Process could not detach from bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
133 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
134 |
ERROR: Process could not detach from bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
135 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
136 |
ERROR: Process could not detach from bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
137 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
138 |
ERROR: Process could not detach from bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
139 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
140 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
141 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
142 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
143 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
144 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
145 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
146 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
147 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
148 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
149 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
150 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
151 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
152 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
153 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
154 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
155 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
156 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
157 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
158 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
159 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
160 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
161 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
162 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
163 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
164 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
165 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
166 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
167 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
168 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
169 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
170 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
171 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
172 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
173 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
174 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
175 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
176 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
177 |
ERROR: Process could not attach to bulletin board. | |
|
Description |
A process was booted with |
Action |
Contact BEA Customer Support. | |
See Also |
| |
178 |
WARN: TP::create_active_object_reference() called illegally - object does not have process activation policy. | |
|
Description |
TP::create_active_object_reference was called on an interface that does not have process activation policy. |
Action |
Change the interface to have process activation policy. | |
179 |
WARN: TP::deactivateEnable() called illegally - object does not have process activation policy. | |
|
Description |
TP::deactivateEnable was called on an object that does not have process activation policy. |
Action |
Change the interface of the object to have process activation policy. | |
180 |
ERROR: TP::create_object_reference() couldn't create object reference for: Interface = val OID = val | |
|
Description |
An exception occurred while calling TP::create_object_reference. The object reference could not be created. |
Action |
Check the user log for messages indicating the nature of the failure. Contact BEA Customer Support. | |
181 |
ERROR: Invoking request - couldn't get: val | |
|
Description |
An exception occurred while invoking a request. The TP Framework could not get the OID from the invocation context. |
Action |
This is an internal error. Contact BEA Customer Support. | |
182 |
ERROR: Invoking request - couldn't get: val | |
|
Description |
An exception occurred while the TP Framework was preparing to invoke a request. The TP Framework could not get the ID of the interface from the invocation context. |
Action |
This is an internal error. Contact BEA Customer Support. | |
183 |
ERROR: Invoking request - couldn't get: val | |
|
Description |
An exception occurred while the TP Framework was preparing to invoke a request. The TP Framework could not get the ID of the object from the invocation context. |
Action |
This is an internal error. Contact BEA Customer Support. | |
184 |
ERROR: Activating object - CORBA Exception not handled by application. Exception ID = val. Interface = val, OID = val | |
|
Description |
The TP Framework caught an unexpected exception while activating an object. The exception id is 'val' and it was thrown by interface 'val'. The object ID is 'val'. |
Action |
Modify the service to catch and handle this exception. | |
See Also |
C++ Programming Reference and Getting Started. | |
185 |
ERROR: Activating object - Unknown exception not handled by application. Interface = val, OID = val | |
|
Description |
The TP Framework caught an unexpected exception while activating an object. The exception id is 'val' and it was thrown by interface 'val'. The object ID is 'val'. |
Action |
Modify the service to catch and handle this exception. | |
See Also |
C++ Programming Reference and Getting Started. | |
186 |
ERROR: Invoking request - no context | |
|
Description |
An exception occurred while the TP Framework was preparing to invoke a request. The TP Framework is missing the invocation context. |
Action |
This is an unexpected internal error. Contact BEA Customer Support. | |
187 |
ERROR: Exception in Server::initialize(): val. Reason = val | |
|
Description |
The Server::initialize function threw exception 'val', for Reason 'val'. |
Action |
Identify the code in the Server::initialize function which threw the exception and modify it appropriately. | |
See Also |
C++ Programming Reference and Getting Started. | |
188 |
ERROR: Exception in Server::initialize(): val. Reason = val | |
|
Description |
The Server::initialize function threw exception 'val', for Reason 'val'. |
Action |
Identify the code in the Server::initialize function which threw the exception and modify it appropriately. | |
See Also |
C++ Programming Reference and Getting Started. | |
189 |
WARN: Exception in Server::release(): val. Reason = val | |
|
Description |
The Server::release function threw exception 'val', for Reason 'val'. |
Action |
Identify the code in the Server::release function which threw the exception and modify it appropriately. | |
See Also |
C++ Programming Reference and Getting Started. | |
190 |
WARN: Exception in Server::release(): val. Reason = val | |
|
Description |
The Server::release function threw exception 'val', for Reason 'val'. |
Action |
Identify the code in the Server::release function which threw the exception and modify it appropriately. | |
See Also |
C++ Programming Reference and Getting Started. | |
191 |
WARN: TP::deactivateEnable() called in illegal context. Called in Server::initialize() or Server::release(). | |
|
Description |
The Server::initialize or Server::release functions have illegally called TP::deactivateEnable. |
Action |
Identify the code in Server::initialize or Server::release function and modify it appropriately. | |
See Also |
C++ Programming Reference and Getting Started. |
|
Copyright © 1999 BEA Systems, Inc. All rights reserved.
|