Programming WebLogic Security

     Previous  Next    Open TOC in new window    View as PDF - New Window  Get Adobe Reader - New Window
Content starts here

Using JAAS Authentication in Java Clients

The following topics are covered in this section:

The sections refer to sample code which is included in the WebLogic Server distribution at:


The jaas directory contains an instructions.html file, ant build files, a sample_jaas.config file, and the following Java files:

You will need to look at the examples when reading the information in the following sections.


JAAS and WebLogic Server

The Java Authentication and Authorization Service (JAAS) is a standard extension to the security in the J2SE Development Kit 5.0. JAAS provides the ability to enforce access controls based on user identity. JAAS is provided in WebLogic Server as an alternative to the JNDI authentication mechanism.

WebLogic Server clients use the authentication portion of the standard JAAS only. The JAAS LoginContext provides support for the ordered execution of all configured authentication provider LoginModule instances and is responsible for the management of the completion status of each configured provider.

Note the following considerations when using JAAS authentication for Java clients:

For more information about JAAS, see the JAAS documentation at


JAAS Authentication Development Environment

Whether the client is an application, applet, Enterprise JavaBean (EJB), or servlet that requires authentication, WebLogic Server uses the JAAS classes to reliably and securely authenticate to the server. JAAS implements a Java version of the Pluggable Authentication Module (PAM) framework, which permits applications to remain independent from underlying authentication technologies. Therefore, the PAM framework allows the use of new or updated authentication technologies without requiring modifications to a Java application.

WebLogic Server uses JAAS for remote Java client authentication, and internally for authentication. Therefore, only developers of custom Authentication providers and developers of remote Java client applications need to be involved with JAAS directly. Users of Web browser clients or developers of within-container Java client applications (for example, those calling an EJB from a servlet) do not require direct use or knowledge of JAAS.

Note: In order to implement security in a WebLogic client you must install the WebLogic Server software distribution kit on the Java client.

The following topics are covered in this section:

JAAS Authentication APIs

To implement Java clients that use JAAS authentication on WebLogic Server, you use a combination of Java J2SE 5.0 application programming interfaces (APIs) and WebLogic APIs.

Table 4-1 lists and describes the Java API packages used to implement JAAS authentication. The information in Table 4-1 is taken from the Java API documentation and annotated to add WebLogic Server specific information. For more information on the Java APIs, see the Javadocs at and

Table 4-2 lists and describes the WebLogic APIs used to implement JAAS authentication. For more information, see Javadocs for WebLogic Classes.

Table 4-1 Java JAAS APIs
The Subject class represents the source of the request, and can be an individual user or a group. The Subject object is created only after the subject is successfully logged in.
The LoginContext class describes the basic methods used to authenticate Subjects and provides a way to develop an application independent of the underlying authentication technology. A Configuration specifies the authentication technology, or LoginModule, to be used with a particular application. Therefore, different LoginModules can be plugged in under an application without requiring any modifications to the application itself.
After the caller instantiates a LoginContext, it invokes the login method to authenticate a Subject. This login method invokes the login method from each of the LoginModules configured for the name specified by the caller.
If the login method returns without throwing an exception, then the overall authentication succeeded. The caller can then retrieve the newly authenticated Subject by invoking the getSubject method. Principals and credentials associated with the Subject may be retrieved by invoking the Subject's respective getPrincipals, getPublicCredentials, and getPrivateCredentials methods.
To log the Subject out, the caller invokes the logout method. As with the login method, this logout method invokes the logout method for each LoginModule configured for this LoginContext.
For a sample implementation of this class, see Listing 4-3.
This is an abstract class for representing the configuration of LoginModules under an application. The Configuration specifies which LoginModules should be used for a particular application, and in what order the LoginModules should be invoked. This abstract class needs to be subclassed to provide an implementation which reads and loads the actual configuration.
In WebLogic Server, use a login configuration file instead of this class. For a sample configuration file, see Listing 4-2. By default, WebLogic Server uses the Sun Microsystems, Inc. configuration class, which reads from a configuration file.
LoginModule describes the interface implemented by authentication technology providers. LoginModules are plugged in under applications to provide a particular type of authentication.
While application developers write to the LoginContext API, authentication technology providers implement the LoginModule interface. A configuration specifies the LoginModule(s) to be used with a particular login application. Therefore, different LoginModules can be plugged in under the application without requiring any modifications to the application itself.

Note: WebLogic Server provides an implementation of the LoginModule (
). Oracle recommends that you use this implementation for JAAS authentication in WebLogic Server Java clients; however, you can develop your own LoginModule.

Implementations of this interface are passed to a CallbackHandler, allowing underlying security services to interact with a calling application to retrieve specific authentication data, such as usernames and passwords, or to display information such as error and warning messages.
Callback implementations do not retrieve or display the information requested by underlying security services. Callback implementations simply provide the means to pass such requests to applications, and for applications to return requested information to the underlying security services.
An application implements a CallbackHandler and passes it to underlying security services so that they can interact with the application to retrieve specific authentication data, such as usernames and passwords, or to display information such as error and warning messages.
CallbackHandlers are implemented in an application-dependent fashion.
Underlying security services make requests for different types of information by passing individual Callbacks to the CallbackHandler. The CallbackHandler implementation decides how to retrieve and display information depending on the Callbacks passed to it. For example, if the underlying service needs a username and password to authenticate a user, it uses a NameCallback and PasswordCallback. The CallbackHandler can then choose to prompt for a username and password serially, or to prompt for both in a single window.

Table 4-2 WebLogic JAAS APIs
An authentication class used to authenticate user credentials.
The WebLogic implementation of the LoginModule, (
, uses this class to authenticate a user and add Principals to the Subject. Developers who write LoginModules must also use this class for the same purpose.
Underlying security services use this class to instantiate and pass a ContextHandlerCallback to the invokeCallback method of a CallbackHandler to retrieve the ContextHandler related to this security operation. If no ContextHandler is associated with this operation, the is thrown.
This callback passes the ContextHandler to LoginModule.login() methods.
Underlying security services use this class to instantiate and pass a GroupCallback to the invokeCallback method of a CallbackHandler to retrieve group information.
Underlying security services use this class to instantiate and pass a URLCallback to the invokeCallback method of a CallbackHandler to retrieve URL information.
The WebLogic implementation of the LoginModule, (
, uses this class.

Note: Application developers should not use this class to retrieve URL information. Instead, they should use the

This class implements the WebLogic Server client runAs methods. Client applications use the runAs methods to associate their Subject identity with the PrivilegedAction or PrivilegedExceptionAction that they execute.
For a sample implementation, see Listing 4-5.
The class used by application developers for returning a username, password and URL. Application developers should use this class to handle the URLCallback to retrieve URL information.

JAAS Client Application Components

At a minimum, a JAAS authentication client application includes the following components:

For a complete working JAAS authentication client that implements the components described here, see the JAAS sample application in the SAMPLES_HOME\server\examples\src\examples\security\jaas directory provided with WebLogic Server.

For more information on the basics of JAAS authentication, see Sun’s JAAS Authentication Tutorial available at

WebLogic LoginModule Implementation

The WebLogic implementation of the LoginModule class (UsernamePasswordLoginModule.class) is provided in the WebLogic Server distribution in the weblogic.jar file, located in the WL_HOME\server\lib directory.

Note: WebLogic Server supports all callback types defined by JAAS as well as all callback types that extend the JAAS specification.

The WebLogic Server UsernamePasswordLoginModule checks for existing system user authentication definitions prior to execution, and does nothing if they are already defined.

For more information about implementing JAAS LoginModules, see the LoginModule Developer’s Guide at

JVM-Wide Default User and the runAs() Method

The first time you use the WebLogic Server implementation of the LoginModule ( to log on, the specified user becomes the machine-wide default user for the JVM (Java virtual machine). When you execute the method, it associates the specified Subject with the current thread’s access permissions and then executes the action. If a specified Subject represents a non-privileged user (users who are not assigned to any groups are considered non-privileged), the JVM-wide default user is used. Therefore, it is important make sure that the runAs() method specifies the desired Subject. You can do this using one of the following options:


Writing a Client Application Using JAAS Authentication

To use JAAS in a WebLogic Server Java client to authenticate a subject, perform the following procedure:

  1. Implement LoginModule classes for the authentication mechanisms you want to use with WebLogic Server. You will need a LoginModule class for each type of authentication mechanism. You can have multiple LoginModule classes for a single WebLogic Server deployment.
  2. Note: Oracle recommends that you use the implementation of the LoginModule provided by WebLogic Server ( for username/password authentication. You can write your own LoginModule for username/password authentication, however, do not attempt to modify the WebLogic Server LoginModule and reuse it. If you write your own LoginModule, you must have it call the method to perform the login. If you use a remote login mechanism such as SAML, you do not need to call the authenticate() method. You only need to call authenticate() if you are using WebLogic Server to perform the logon.

    The class uses a JNDI Environment object for initial context as described in Table 4-3.

  3. Implement the CallbackHandler class that the LoginModule will use to communicate with the user and obtain the requested information, such as the username, password, and URL. The URL can be the URL of a WebLogic cluster, providing the client with the benefits of server failover. The WebLogic Server distribution provides a SampleCallbackHandler which is used in the JAAS client sample. The code is available as part of the distribution:
    • WebLogic Server Distribution: In the directory SAMPLES_HOME\server\examples\src\examples\security\jaas
    • Note: Instead of implementing your own CallbackHandler class, you can use either of two WebLogic-supplied CallbackHandler classes, or For more information on these classes, see Javadocs for WebLogic Classes.
  4. Write a configuration file that specifies which LoginModule classes to use for your WebLogic Server and in which order the LoginModule classes should be invoked. See Listing 4-2 for the sample configuration file used in the JAAS client sample provided in the WebLogic Server distribution.
  5. Listing 4-2 sample_jaas.config Code Example
    /** Login Configuration for the JAAS Sample Application **/
    Sample {
                required debug=false;
  6. In the Java client, write code to instantiate a LoginContext. The LoginContext consults the configuration file, sample_jaas.config, to load the default LoginModule configured for WebLogic Server. See Listing 4-3 for an example LoginContext instantiation.
  7. Note: If you use another means to authenticate the user, such as an Identity Assertion provider or a remote instance of WebLogic Server, the default LoginModule is determined by the remote source.
    Listing 4-3 LoginContext Code Fragment
        LoginContext loginContext = null;
    // Create LoginContext; specify username/password login module
    loginContext = new LoginContext("Sample",
    new SampleCallbackHandler(username, password, url));
  8. Invoke the login() method of the LoginContext instance. The login() method invokes all the loaded LoginModules. Each LoginModule attempts to authenticate the subject. If the configured login conditions are not met, the LoginContext throws a LoginException. See Listing 4-4 for an example of the login() method.
  9. Listing 4-4 Login() Method Code Fragment
    * Attempt authentication
    // If we return without an exception, authentication succeeded
        catch(FailedLoginException fle)
    System.out.println("Authentication Failed, " +
    catch(AccountExpiredException aee)
    System.out.println("Authentication Failed: Account Expired");
    catch(CredentialExpiredException cee)
    System.out.println("Authentication Failed: Credentials
    catch(Exception e)
    System.out.println("Authentication Failed: Unexpected
                                   Exception, " + e.getMessage());
  10. Write code in the Java client to retrieve the authenticated Subject from the LoginContext instance using the method and call the action as the Subject. Upon successful authentication of a Subject, access controls can be placed upon that Subject by invoking the method. The runAs() method associates the specified Subject with the current thread’s access permissions and then executes the action. See Listing 4-5 for an example implementation of the getSubject() and runAs() methods.
  11. Note: Use of the JAAS methods in WebLogic Server applications do not associate the Subject with the client actions. You can use the doAs methods to implement J2SE security in WebLogic Server applications, but such usage is independent of the need to use the Security.runAs() method.
    Listing 4-5 getSubject() and runAs() Methods Code Fragment
    * Retrieve authenticated subject, perform SampleAction as Subject
    Subject subject = loginContext.getSubject();
    SampleAction sampleAction = new SampleAction(url);
    Security.runAs(subject, sampleAction);
  12. Write code to execute an action if the Subject has the required privileges. Oracle provides a a sample implementation, SampleAction, of the class that executes an EJB to trade stocks. The code is available as part of the distribution:
    • WebLogic Server Distribution: In the directory SAMPLES_HOME\server\examples\src\examples\security\jaas
  13. Invoke the logout() method of the LoginContext instance. The logout() method closes the user’s session and clear the Subject. See Listing 4-6 for an example of the login() method.
  14. Listing 4-6 logout() Method Code Example
    System.out.println("logging out...");
Note: The LoginModule.logout() method is never called for a WebLogic Authentication provider or a custom Authentication provider, because once the Principals are created and placed into a Subject, the WebLogic Security Framework no longer controls the lifecycle of the Subject. Therefore, code that creates the JAAS LoginContext to log in and obtain the Subject should also call the LoginContext to log out. Calling LoginContext.logout() results in the clearing of the Principals from the Subject.


Using JNDI Authentication

Java clients use the Java Naming and Directory Interface (JNDI) to pass credentials to WebLogic Server. A Java client establishes a connection with WebLogic Server by getting a JNDI InitialContext. The Java client then uses the InitialContext to look up the resources it needs in the WebLogic Server JNDI tree.

Note: JAAS is the preferred method of authentication, however, the WebLogic Authentication provider’s LoginModule supports only user name and password authentication. Thus, for client certificate authentication (also referred to as two-way SSL authentication), you should use JNDI. To use JAAS for client certificate authentication, you must write a custom Authentication provider whose LoginModule does certificate authentication. For information on how to write LoginModules, see

To specify a user and the user’s credentials, set the JNDI properties listed in Table 4-3.

Table 4-3 JNDI Properties Used for Authentication 
Provides an entry point into the WebLogic Server environment. The class weblogic.jndi.WLInitialContextFactory is the JNDI SPI for WebLogic Server.
Specifies the host and port of the WebLogic Server that provides the name service. For example: t3://weblogic:7001.
Specifies the identity of the user when that user authenticates to the default (active) security realm.
Specifies the credentials of the user when that user authenticates to the default (active) security realm.

These properties are stored in a hash table that is passed to the InitialContext constructor. Listing 4-7 illustrates how to use JNDI authentication in a Java client running on WebLogic Server.

Listing 4-7 Example of Authentication
Hashtable env = new Hashtable();
env.put(Context.PROVIDER_URL, “t3://weblogic:7001”);
env.put(Context.SECURITY_PRINCIPAL, “javaclient”);
env.put(Context.SECURITY_CREDENTIALS, “javaclientpassword”);
ctx = new InitialContext(env);
Note: For information on JNDI contexts and threads and how to avoid potential JNDI context problems, see “JNDI Contexts and Threads” and “How to Avoid Potential JNDI Context Problems” in Programming WebLogic JNDI.
Note: In versions of WebLogic Server prior to 9.0, when using protocols other than IIOP with JNDI, the first user is "sticky" in the sense that it becomes the default user when no other user is present. This is not a good practice, as any subsequent logins that do not have a username and credential are granted the identify of the default user.
Note: In version 9.0, this is no longer true and there is no default user.
Note: To return to the previous behavior, the weblogic.jndi.WLContext.ENABLE_DEFAULT_USER field must be set, either via the command line or through the InitialContext interface.


Java Client JAAS Authentication Code Examples

A complete working JAAS authentication sample is provided with the WebLogic Server product. The sample is located in the SAMPLES_HOME\server\examples\src\examples\security\jaas directory. For a description of the sample and instructions on how to build, configure, and run this sample, see the package.html file in the sample directory. You can modify this code example and reuse it.

  Back to Top       Previous  Next