|Oracle® Audit Vault Server Installation Guide
Release 10.2.3.2 for HP-UX Itanium
Part Number E14461-03
This chapter describes the following Oracle Audit Vault Server (Audit Vault Server) preinstallation requirements. This chapter includes the following sections:
To plan the installation process, you must be familiar with the features of Oracle Audit Vault. Oracle Audit Vault Administrator's Guide discusses the basic features of Oracle Audit Vault.
Before you install the Oracle software, you must complete the tasks described in this chapter as the
root user. Log in to your system as the
The system must meet the following minimum hardware requirements:
At least 1024 MB of physical RAM.
The following table describes the relationship between installed RAM and the configured swap space requirement.
|Between 512 MB and 2048 MB||1.5 times the size of RAM|
|Between 2049 MB and 8192 MB||Equal to the size of RAM|
|More than 8192 MB||0.75 times the size of RAM|
400 MB of disk space in the
6 GB of disk space for the Oracle Audit Vault Server software.
1.7 GB of additional disk space for the Audit Vault Server database files in the Oracle Base. This is only if the database storage option is on the file system. For other storage options, such as ASM, the database files will be stored elsewhere. Also, this 1.7 GB disk space is only the starting size. The Oracle Audit Vault administrator must take future growth of the database size into consideration, especially as the server collects more and more audit data.
To ensure that the system meets these requirements:
To determine the physical RAM size, enter the following command:
# /usr/contrib/bin/machinfo | grep -i Memory
If the size of the physical RAM is less than the required size, then you must install more memory before continuing.
To determine the size of the configured swap space, enter the following command:
# /usr/sbin/swapinfo -a
To determine the amount of disk space available in the
/tmp directory, enter the following command:
# bdf /tmp
Delete unnecessary files from the
/tmp directory to meet the disk space requirement.
TMPDIR environment variables when setting the
oracle user's environment (described later).
Extend the file system that contains the
/tmp directory. If necessary, contact your system administrator for information about extending file systems.
# /bin/getconf KERNEL_BITS
Note:The expected output of this command is 64. If you do not see the expected output, then you cannot install the software on this system.
Verify that the following software, or a later version, is installed on the system. The procedure following the table describes how to verify whether these requirements are addressed.
Note:Oracle Universal Installer performs checks on your system to verify that it meets the listed requirements. To ensure that these checks pass, verify the requirements before you start Oracle Universal Installer.
The platform-specific hardware and software requirements included in this installation guide were current at the time this guide was published. However, because new platforms and operating system versions might be certified after this guide is published, review the certification matrix on the My Oracle Support (formerly OracleMetaLink) Web site for the most up-to-date list of certified hardware platforms and operating system versions. The My Oracle Support Web site is available at
If you do not have a current Oracle Support Services contract, then you can access the same information at:
|Operating system||Operating system version:
HP-UX 11i v2 (11.23)
HP-UX 11i v3 (11.31)
|PL/SQL native compilation||One of the following:
Note: The gcc compiler is supported only for PL/SQL native compilation.
|Pro*C/C++, Oracle Call Interface, Oracle C++ Call Interface, Oracle XML Developer's Kit (XDK)||HP-UX 11i v2 (11.23)
HP-UX 11i v3 (11.31)
|Oracle JDBC/OCI Drivers||You can use the following optional Java SDK versions with the Oracle JDBC/OCI drivers, however they are not required for the installation:
Note: Java SDK 1.4.2_07 is installed with this release.
# uname -a HP-UX hostname B.11.23 ia64 109444686 unlimited-user license
In this example, the version of HP-UX 11i is 11.23.
# /usr/sbin/swlist -l level | more
If a required bundle, product, or fileset is not installed, then you must install it. Refer to your operating system or software documentation for information about installing products.
In addition, you need to verify that the following patches, or their later versions, are installed on the system. The procedure following the table describes how to check these requirements.
Note:There may be more recent versions of the patches listed installed on the system. If a listed patch is not installed, then determine whether a more recent version is installed before installing the version listed.
|Installation Type or Product||Requirement|
|All installations||The following operating system patches are required for HP-UX 11i v2 (11.23):
The following operating system patch is required for HP-UX 11i v3 (11.31):
PHKL_35936: 11.31 call to read(2) or write(2) may incorrectly return -1
Note: For up-to-date certification information for HP-UX 11i v3 (11.31), please refer to theMy Oracle Support Web site at:
|All installations||The following JDK patches:
Note: Refer to the following Web site for information about additional patches that may be required by JDK 1.4.2:
|PL/SQL native compilation, Pro*C/C++, Oracle Call Interface, Oracle C++ Call Interface, Oracle XML Developer's Kit (XDK)||The following C and C++ patches:
# /usr/sbin/swlist -l patch | grep PHSS_33279
Alternatively, to list all installed patches, enter the following command:
# /usr/sbin/swlist -l patch | more
If the Web site shows a more recent version of the patch, then download and install that version.
The following Kernel Parameters are obsolete on HP-UX 11i v3 (11.31):
maxswapchunks msgmap ncallout semmap vx_ncsize
Creating Required Symbolic Links
Note:This task is required only if the Motif 2.1 Development Environment package (X11MotifDevKit.MOTIF21-PRG) is not installed.
# cd /usr/lib # ln -s libX11.3 libX11.sl # ln -s libXIE.2 libXIE.sl # ln -s libXext.3 libXext.sl # ln -s libXhp11.3 libXhp11.sl # ln -s libXi.3 libXi.sl # ln -s libXm.4 libXm.sl # ln -s libXp.2 libXp.sl # ln -s libXt.3 libXt.sl # ln -s libXtst.2 libXtst.sl
Typically, the computer on which you want to install Oracle Audit Vault is connected to the network, has local storage to contain the Oracle Audit Vault installation, has a display monitor, and has a CD-ROM or DVD drive.
This section describes how to install Oracle Audit Vault on computers that do not meet the typical scenario. It covers the following cases:
When you run Oracle Universal Installer, an error might occur if name resolution is not set up. To avoid this error, before you begin an installation, you must ensure that host names are resolved only through the
To ensure that host names are resolved only through the
Verify that the
/etc/hosts file is used for name resolution. You can do this by checking the hosts file entry in the
nsswitch.conf file as follows:
# cat /etc/nsswitch.conf | grep hosts
The output of this command should contain an entry for files.
Verify that the host name has been set by using the
hostname command as follows:
The output of this command should be similar to the following:
Verify that the domain name has not been set dynamically by using the
domainname command as follows:
This command should not return any results.
Verify that the hosts file contains the fully qualified host name by using the following command:
# cat /etc/hosts | grep `eval hostname`
The output of this command should contain an entry for the fully qualified host name and for the
192.0.2.1 myhost.us.example.com myhost 127.0.0.1 localhost localhost.localdomain
If the hosts file does not contain the fully qualified host name, then open the file and make the required changes in it.
Dynamic Host Configuration Protocol (DHCP) assigns dynamic IP addresses on a network. Dynamic addressing enables a computer to have a different IP address each time it connects to the network. In some cases, the IP address can change while the computer is still connected. You can have a mixture of static and dynamic IP addressing in a DHCP system.
In a DHCP setup, the software tracks IP addresses, which simplifies network administration. This lets you add a new computer to the network without having to manually assign that computer a unique IP address.
Do not install Audit Vault Server in an environment where the IP addresses of the Audit Vault Server or the Oracle Audit Vault collection agent can change. If your environment uses DHCP, ensure that all Oracle Audit Vault systems use static IP addresses.
You can install Oracle Audit Vault on a multi-homed computer. A multi-homed computer has multiple network cards, which in turn, allows it to have multiple IP addresses. Each IP address is associated with a host name. In addition, you can set up aliases for the host name. By default, Oracle Universal Installer uses the
ORACLE_HOSTNAME environment variable setting to find the host name. If the
ORACLE_HOSTNAME environment variable is not set and you are installing Oracle Audit Vault on a computer that has multiple network cards, then Oracle Universal Installer determines the host name by using the first entry in the
Clients must be able to access the computer either by using this host name or by using aliases for this host name. To verify this, ping the host name from the client computers using the short name (host name only) and the full name (host name and domain name). Both tests must be successful.
Setting the ORACLE_HOSTNAME Environment Variable
For example, if the fully qualified host name is
myhost.us.example.com, then enter one of the following commands:
Bourne, Bash, or Korn shell:
$ ORACLE_HOSTNAME=myhost.us.example.com $ export ORACLE_HOSTNAME
% setenv ORACLE_HOSTNAME myhost.us.example.com
A computer with multiple aliases is registered with the naming service under a single IP address. The naming service resolves all of those aliases to the same computer. Before installing Oracle Audit Vault on a computer with multiple aliases, set the
ORACLE_HOSTNAME environment variable to the computer whose host name you want to use.
Depending on whether you are installing Oracle software for the first time on this system and the products that you are installing, you may need to create several operating system groups and users. Log in to your system as the
root user before you attempt to create these operating system groups and users.
If you are installing Audit Vault Server, it requires the following operating system groups and user:
You must create this group the first time you install Oracle Audit Vault software on the system. It identifies operating system user accounts that have database administrative privileges (the
SYSDBA privilege). The default name for this group is
This is an optional group. Create this group if you want a separate group of operating system users to have a limited set of administrative privileges (the
SYSOPER privilege). By default, members of the OSDBA group also have the
Verify that the unprivileged user
nobody exists on the system. The
nobody user must own the external jobs (
extjob) executable after the installation.
The following operating system group and user are required for all installations:
You must create this group the first time you install Oracle software on the system. The usual name chosen for this group is
oinstall. This group owns the Oracle inventory, which is a catalog of all Oracle software installed on the system.
Note:If Oracle software is already installed on the system, then the existing Oracle Inventory group must be the primary group of the operating system user that you use to install new Oracle software. The following topics describe how to identify an existing Oracle Inventory group.
You must create this user the first time you install Oracle software on the system. This user owns all software installed during the installation. This user must have the Oracle Inventory group as its primary group. It must also have the OSDBA and OSOPER groups as secondary groups.
Note:In Oracle documentation, this user is referred to as the
All installations of Oracle software on the system require a single Oracle Inventory group. After the first installation of Oracle software, you must use the same Oracle Inventory group for all subsequent Oracle software installations on that system. However, you can choose to create different Oracle software owner users, OSDBA groups, and OSOPER groups (other than
oper) for separate installations. By using different groups for different installations, members of these different groups have DBA privileges only on the associated databases, rather than on all databases on the system.
See Also:Oracle Database Administrator's Guide for more information about the OSDBA group and the
Note:The following topics describe how to create local users and groups. As an alternative to creating local users and groups, you could create the appropriate users and groups in a directory service, for example, Network Information Services (NIS). For information about using directory services, contact your system administrator or see your operating system documentation.
The following topics describe how to create the required operating system users and groups:
You must create the Oracle Inventory group if it does not already exist. The following topics describe how to determine the Oracle Inventory group name, if it exists, and how to create it if necessary.
Determining Whether the Oracle Inventory Group Exists
When you install Oracle software on the system for the first time, Oracle Universal Installer creates the
oraInst.loc file. This file identifies the name of the Oracle Inventory group and the path of the Oracle Inventory directory.
# more /var/opt/oracle/oraInst.loc
If the output of this command shows the
oinstall group name, then the group already exists.
oraInst.loc file exists, then the output from this command is similar to the following:
inst_group parameter shows the name of the Oracle Inventory group,
Creating the Oracle Inventory Group
oraInst.loc file does not exist, then create the Oracle Inventory group by entering the following command:
# /usr/sbin/groupadd oinstall
You must create an OSDBA group in the following circumstances:
An OSDBA group does not exist, for example, if this is the first installation of Oracle software on the system
An OSDBA group exists, but you want to give a different group of operating system users database administrative privileges in a new Oracle installation
If the OSDBA group does not exist or if you need a new OSDBA group, then create it as follows.
# /usr/sbin/groupadd dba
Create an OSOPER group only if you want to identify a group of operating system users with a limited set of database administrative privileges (SYSOPER operator privileges). For most installations, it is sufficient to create only the OSDBA group. If you want to use an OSOPER group, then you must create it in the following circumstances:
If an OSOPER group does not exist, for example, if this is the first installation of Oracle software on the system
If an OSOPER group exists, but you want to give a different group of operating system users database operator privileges in a new Oracle installation
If you need a new OSOPER group, then create it as follows.
# /usr/sbin/groupadd oper
You must create an Oracle software owner user in the following circumstances:
If an Oracle software owner user does not exist, for example, if this is the first installation of Oracle software on the system
If an Oracle software owner user exists, but you want to use a different operating system user, with a different group membership, to give database administrative privileges to those groups in a new Oracle installation
To determine whether an Oracle software owner user named
oracle exists, enter the following command:
# id oracle
oracle user exists, then the output from this command is similar to the following:
uid=440(oracle) gid=200(oinstall) groups=201(dba),202(oper)
If the user exists, then determine whether you want to use the existing user or create another Oracle software owner (
oracle) user. If you want to use the existing user, then ensure that the primary group of the user is the Oracle Inventory group and that it is a member of the appropriate OSDBA and OSOPER groups.
Note:If necessary, contact your system administrator before using or modifying an existing user.
See one of the following sections for more information:
To modify an existing Oracle software owner user, see Section 220.127.116.11.
To create an Oracle software owner user, see the following section.
If the Oracle software owner user does not exist or if you need a new Oracle software owner user, then create it as follows. In the following procedure, use the user name
oracle unless a user with that name already exists.
# /usr/sbin/useradd -g oinstall -G dba[,oper] oracle
In this command:
-g option specifies the primary group, which must be the Oracle Inventory group, for example
-G option specifies the secondary groups, which must include the OSDBA group and, if required, the OSOPER group. For example,
# passwd oracle
See Section 2.6.5 to continue.
oracle user exists, but its primary group is not
oinstall or it is not a member of the appropriate OSDBA or OSOPER groups, then enter a command similar to the following to modify it. Specify the primary group using the
-g option and any required secondary group using the
# /usr/sbin/usermod -g oinstall -G dba[,oper] oracle
Before installing the software, perform the following procedure to verify that the
nobody user exists on the system:
Note:The kernel parameter and shell limit values shown in the following section are recommended minimum values only or the value checked at the time of the installation. For production database systems, Oracle recommends that you tune these values to optimize the performance of the system. See your operating system documentation for more information about tuning kernel parameters.
Verify that the kernel parameters shown in the following table are set either to the formula shown, or to values greater than or equal to the recommended value shown. The procedure following the table describes how to verify and set the values.
|Parameter||Recommended Formula or Value|
|maxdsiz||1073741824 (1 GB)|
|maxdsiz_64bit||2147483648 (2 GB)|
|maxssiz||134217728 (128 MB)|
|maxssiz_64bit||1073741824 (1 GB)|
|shmmax||The size of physical memory or 1073741824 (0X40000000), whichever is greater.
Note: To avoid performance degradation, the value should be greater than or equal to the size of the available memory.
Follow these steps:
Enter the following command to start the
# /usr/sbin/kcweb -F
Check the value or formula specified for each of these parameters and, if necessary, modify that value or formula.
If necessary, refer to the
kcweb online Help for more information about completing this step.
Note:If you modify the value of a parameter that is not dynamic, then you must restart the system.
If necessary, when the system restarts, log in and switch user to
You must identify or create the following directories for the Oracle software:
The Oracle base directory is a top-level directory for Oracle software installations. On HP-UX Itanium systems, the Optimal Flexible Architecture (OFA) guidelines recommend that you use a path similar to the following for the Oracle base directory:
mount_point is the mount point directory for the file system that will contain the Oracle software.
The examples in this guide use
/u01 for the mount point directory. However, you could choose another mount point directory, such as
You can use the same Oracle base directory for more than one installation or you can create separate Oracle base directories for different installations. If different operating system users install Oracle software on the same system, then each user must create a separate Oracle base directory. The following example Oracle base directories could all exist on the same system:
/u01/app/oracle /u01/app/orauser /opt/oracle/app/oracle
The following topics describe how to identify existing Oracle base directories that might be suitable for your installation and how to create an Oracle base directory if necessary.
The Oracle Inventory directory (
oraInventory) stores an inventory of all software installed on the system. It is required by, and shared by, all Oracle software installations on a single system. The first time you install Oracle software on a system, Oracle Universal Installer prompts you to specify the path to this directory. Oracle recommends that you choose the following path:
Oracle Universal Installer creates the directory that you specify and sets the correct owner, group, and permissions for it. You do not need to create it.
Note:All Oracle software installations rely on this directory. Ensure that you back it up regularly.
Do not delete this directory unless you have completely removed all Oracle software from the system.
The Oracle home directory is the directory where you choose to install the software for a particular Oracle product. You must install different Oracle products, or different releases of the same Oracle product, in separate Oracle home directories. When you run Oracle Universal Installer, it prompts you to specify the path to this directory and a name that identifies it. The directory that you specify must be a subdirectory of the Oracle base directory. Oracle recommends that you specify a path similar to the following for the Oracle home directory:
Oracle Universal Installer creates the directory path that you specify under the Oracle base directory. It also sets the correct owner, group, and permissions on it. You do not need to manually create this directory on your system.
Before starting the installation, you must either identify an existing Oracle base directory or if required, create one. This section contains the following topics:
Note:You can choose to create an Oracle base directory, even if other Oracle base directories exist on the system.
Existing Oracle base directories might not have paths that comply with Optimal Flexible Architecture (OFA) guidelines. However, if you identify an existing Oracle Inventory directory or existing Oracle home directories, then you can usually identify the Oracle base directories, as follows:
To identify an existing Oracle Inventory directory
# more /var/opt/oracle/oraInst.loc
oraInst.loc file exists, then the output from this command is similar to the following:
inventory_loc parameter identifies the Oracle Inventory directory (
oraInventory). The parent directory of the
oraInventory directory is typically an Oracle base directory. In the previous example,
/u01/app/oracle is an Oracle base directory.
# more /etc/oratab
*:/u03/app/oracle/product/1.0.0/db_1:N *:/opt/orauser/infra_904:N *:/oracle/9.2.0:N
The directory paths you specify on each line identify Oracle home directories. Directory paths that end with the user name of the Oracle software owner that you want to use are valid choices for an Oracle base directory. If you intend to use the
oracle user to install the software, then you could choose one of the following directories from the previous example:
Note:If possible, choose a directory path similar to the first (
/u03/app/oracle). This path complies with the OFA guidelines.
Before deciding to use an existing Oracle base directory for this installation, ensure that it satisfies the following conditions:
It should not be on the same file system as the operating system.
It must have sufficient free disk space as described in the table in Section 2.3.
# bdf oracle_base_path
If an Oracle base directory does not exist on the system or if you want to create an Oracle base directory, then complete the steps in Section 2.9.2.
Before you create an Oracle base directory, you must identify an appropriate file system with sufficient free disk space, as indicated in the table in Section 2.3.
df -k command to determine the free disk space on each mounted file system.
From the display, identify a file system that has appropriate free space.
Note the name of the mount point directory for the file system that you identified.
To create the Oracle base directory and specify the correct owner, group, and permissions for it:
# mkdir -p /mount_point/app/oracle_sw_owner # chown -R oracle:oinstall /mount_point/app/oracle_sw_owner # chmod -R 775 /mount_point/app/oracle_sw_owner
For example, if the mount point you identify is
oracle is the user name of the Oracle software owner, then the recommended Oracle base directory path is:
When you configure the environment of the
oracle user (see Section 2.6.1), set the
ORACLE_BASE environment variable to specify the Oracle base directory that you created.
If you choose to place the Oracle Audit Vault database files on a file system, then use the following guidelines when deciding where to place them:
The default path suggested by Oracle Universal Installer for the database file directory is a subdirectory of the Oracle base directory.
If you want to use a single file system, then choose a file system on a physical device that is dedicated to the database.
For best performance and reliability, choose a redundant arrays of independent disks (RAID) device or a logical volume on more than one physical device and implement the stripe-and-mirror-everything (SAME) methodology.
If you want to use more than one file system, then choose file systems on separate physical devices that are dedicated to the database.
This method enables you to distribute physical I/O and create separate control files on different devices for increased reliability. It also enables you to fully implement the OFA guidelines.
For optimum performance, the file systems that you choose should be on physical devices that are used only by the database.
oracle user must have write permissions to create the files in the path that you specify.
Before you begin the Audit Vault Server installation, you should check to see that the
DISPLAY environment variable is set to a proper value. For example, for the Bourne, Bash, or Korn shell, you would enter the following commands, where
myhost.us.example.com is your host name:
$ DISPLAY=myhost.us.example.com:1.0 $ export DISPLAY
For example, for the C shell, you would enter the following command, where
myhost.us.example.com is your host name:
% setenv DISPLAY myhost.us.example.com:1.0
Ensure that the
NLS_LANG environment variable is not set.
For example, for C shell:
For example, for Bourne, Bash, or Korn shells: