Skip Headers
Oracle® Fail Safe Error Messages
Release 3.4.2 for Microsoft Windows

Part Number E14974-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
PDF · Mobi · ePub

2.3 FS-10100 to FS-10149

FS-10100 Requested operation in child process timed out
Cause: The requested operation in a child process has timed out and cannot be completed.
Action: Retry the operation. If the problem persists, report the problem (including information about your hardware and Windows operating system configuration) to your Oracle support representative.
FS-10101 Failed to authenticate the user %s\%s on the cluster
Cause: Unable to authenticate the client.
Action: If you receive this error when you attempt to make a cluster connection from the manager interface, check to make sure that you entered the correct user name and password. Also, check to make sure that the cluster server service is up and running on the local node.
FS-10102 Failed to impersonate the client on the cluster
Cause: Unable to impersonate the client.
Action: Report the problem to your Oracle support representative.
FS-10103 Oracle Services for MSCS failed to validate the client context
Cause: This error usually means that the manager has lost the connection with Oracle Services for MSCS.
Action: Reconnect to Oracle Services for MSCS by clicking Change Cluster Connection on the File menu and respecifying the cluster connection.
FS-10104 Oracle Services for MSCS has run out of memory
Cause: Oracle Services for MSCS has run out of memory.
Action: Try to make more memory available to Oracle Services for MSCS.
FS-10105 The requested operation must be performed on node %s
Cause: The requested operation must be performed on a specific node.
Action: The manager will redirect the request to the appropriate node.
FS-10106 No error message was reported by Oracle Services for MSCS
Cause: Oracle Services for MSCS did not report an error.
Action: Report the problem (including information about the operation you are performing) to your Oracle support representative.
FS-10107 Failed to obtain the lock for a clusterwide operation
Cause: Unable to obtain the lock for a clusterwide operation. A clusterwide operation already in progress may be holding the lock.
Action: Allow a few minutes for the currently running operation to complete and try your operation again. If no clusterwide operation is running, then use MSCS Cluster Administrator to shut down and restart Oracle Services for MSCS in the Cluster Group. Then, on another node (one not running the Cluster Group), restart Oracle Services for MSCS by double-clicking Services in the Windows Control Panel program group and then stopping and starting the OracleMSCSServices service.
FS-10109 Failed to list cluster networks
Cause: Unable to list the cluster networks.
Action: Make sure the cluster server is up and running on the local system.
FS-10110 Group is inconsistent. Dependent objects are missing from the group %s
Cause: The verify operation found that dependent objects are missing from the specified group.
Action: Delete, re-create, and then repopulate the group using the manager. Or, report the problem (including information about your cluster configuration) to your Oracle support representative.
FS-10111 Failed to verify group %s
Cause: An error was detected in the group verification.
Action: Check the secondary error.
FS-10112 Failed to verify resource %s
Cause: The specified resource in the group failed to pass verification.
Action: Check the secondary error.
FS-10113 Failed to verify resource dependencies for %s
Cause: The specified resource in the group failed to pass the resource dependency verification.
Action: Check the secondary error.
FS-10115 Failed to create Oracle database instance %s on node %s
Cause: An attempt to create the specified Oracle database instance failed.
Action: Check the secondary error.
FS-10116 Failed to get resource information for disk %s
Cause: Unable to get disk resource information from the local cluster.
Action: Check the secondary error.
FS-10117 Failed to perform operation on group. Resources are in pending or failed state. Check resources and try again
Cause: The specified group has resources in a pending or failed state. An operation cannot be performed on a group while resources are in either of these states.
Action: Try again when resources are not in a pending or failed state.
FS-10118 Failed waiting for move of group %s to complete
Cause: Failed while waiting for the completion of the Move Group to a Different Node operation.
Action: Check the secondary error.
FS-10119 Group failed to reside on destination node
Cause: A successful call was made to move the group. However, after the completion of the move operation, the group still resides on the original node. Either the group failed back from the destination node or an error occurred in the cluster software.
Action: If the problem was due to failback, take the group offline and retry the Move Group to a Different Node operation. Then, on the destination node, bring the individual resources back online to determine which resource is causing the failback to occur. If the problem was due to an error in the cluster software, refer to the cluster software documentation.
FS-10120 Unable to find the resource %s
Cause: Unable to find the resource that you requested.
Action: Make sure that you entered the correct resource name.
FS-10121 Failed to translate the ORACLE_HOME environment variable
Cause: Failed to get the value of the ORACLE_HOME environment variable.
Action: Make sure that ORACLE_HOME has been correctly configured.
FS-10122 Failed to translate the NLS_LANG environment variable
Cause: Failed to get the value of the NLS_LANG environment variable.
Action: Make sure that NLS_LANG has been correctly configured.
FS-10123 Failed to translate the Oracle Net environment variable
Cause: Failed to get the value of the Oracle Net environment variable.
Action: Make sure that Oracle Net has been correctly configured.
FS-10124 Failed to translate the ORA_SID_PWFILE environment variable
Cause: Failed to get the value of the ORA_SID_PWFILE environment variable.
Action: Make sure ORA_SID_PWFILE has been correctly configured.
FS-10125 Unable to find any supported storage resources in the cluster
Cause: Unable to find any supported storage resources in the cluster.
Action: If a custom storage resource type is used in the cluster, the resource type must support the resource control function CLUSCTL_RESOURCE_STORAGE_GET_DISK_INFO in its resource DLL for Oracle Services for MSCS to support the storage resource type.
FS-10126 A network name resource is required for this group, %s, but could not be found
Cause: A resource in this group needs a network name resource; however, the network name resource could not be found in the group.
Action: Add a network name resource to the group.
FS-10127 A listener resource is required for this group, %s, but could not be found
Cause: A resource in this group needs a listener resource; however, the listener resource could not be found in the group.
Action: Add a listener resource to the group.
FS-10128 Group %s contains a listener resource but does not contain a required database resource
Cause: The group contains a listener resource but does not contain a required database resource.
Action: Delete the listener resource from the group.
FS-10129 Group %s contains an Oracle Intelligent Agent resource but does not contain a required database resource
Cause: The group contains an Oracle Intelligent Agent resource but does not contain a required database resource.
Action: Delete the Oracle Intelligent Agent resource from the group.
FS-10130 Failed to add an Oracle Intelligent Agent to group %s
Cause: Unable to add an Oracle Intelligent Agent to the group.
Action: Check the secondary error.
FS-10131 Failed to remove the Oracle Intelligent Agent from group %s
Cause: Unable to remove the Oracle Intelligent Agent from the group.
Action: Check the secondary error.
FS-10132 Failed to query Oracle Intelligent Agent information for group %s
Cause: Unable to query Oracle Intelligent Agent information in the group.
Action: Check the secondary error.
FS-10133 Failed to modify Oracle Intelligent Agent information for group %s
Cause: Unable to modify Oracle Intelligent Agent information for the group.
Action: Check the secondary error.
FS-10134 Failed to access or modify Oracle Intelligent Agent information in the Windows registry
Cause: Unable to access or modify Oracle Intelligent Agent information in the Windows registry.
Action: Check the Windows registry.
FS-10135 Failed to move Oracle Intelligent Agent configuration files
Cause: Unable to move Oracle Intelligent Agent configuration files.
Action: Check that the Oracle Intelligent Agent of the group is not online. Check that the old and new disks used by the Oracle Intelligent Agent are online.
FS-10136 Failed to create an Oracle Intelligent Agent Windows service %s on node %s
Cause: Attempt to create an Oracle Intelligent Agent Windows service failed.
Action: Check the secondary error.
FS-10137 Failed to create Oracle Intelligent Agent information in Windows registry
Cause: Attempt to create Oracle Intelligent Agent information in the Windows registry failed.
Action: Check the secondary error.
FS-10138 Failed to correct Oracle Intelligent Agent information in Windows registry
Cause: An attempt to correct Oracle Intelligent Agent information in the Windows registry failed.
Action: Check the secondary error.
FS-10139 Failed to read the Oracle Intelligent Agent persistent storage
Cause: Unable to read the Oracle Intelligent Agent persistent storage. Without this information, the Oracle Intelligent Agent cannot be verified.
Action: Use Oracle Fail Safe Manager to remove the agent from the group, and then reconfigure the agent.
FS-10140 The Oracle Intelligent Agent configuration path references a disk that was not found in the group
Cause: The Oracle Intelligent Agent configuration path references a disk that is not within the group.
Action: Using Oracle Fail Safe Manager, remove the Oracle Intelligent Agent from the group, and then reconfigure the Oracle Intelligent Agent.
FS-10141 Failed to delete Oracle database instance %s on node %s
Cause: An attempt to create an Oracle database instance failed.
Action: Check the secondary error.
FS-10142 Oracle Intelligent Agent %s was not cleaned up completely
Cause: Some Oracle Fail Safe configuration information that was created for the Oracle Intelligent Agent may still remain in the Windows registry.
Action: Report the problem (including information about your hardware and Windows operating system configuration and any secondary errors) to your Oracle support representative.
FS-10143 Failed to load any of the following Oracle DLLs: %s
Cause: Unable to load the specified Oracle DLLs.
Action: Check to make sure that your search path includes the proper Oracle home bin directory.
FS-10144 An unsupported version of Oracle Database was found
Cause: The version of Oracle Database found on the system is not supported.
Action: Install a supported version of Oracle Database.
FS-10145 Minimum version of Oracle Intelligent Agent is not installed in the %s Oracle home on node %s
Cause: The minimum version of Oracle Intelligent Agent is not installed in the specified Oracle home.
Action: Install the minimum version of Oracle Intelligent Agent in the specified Oracle home.
FS-10146 Unable to find a valid location to generate TCL script for Oracle Enterprise Manager
Cause: Unable to find a valid location to create the TCL script used by Oracle Enterprise Manager to discover the cluster.
Action: This is an informational message. No action is needed.
FS-10147 Error determining resource dependency level
Cause: Error encountered while trying to determine the dependency level of resources in the group.
Action: Check the secondary error.
FS-10148 Failed to create the Oracle Intelligent Agent resource %s
Cause: Unable to create the specified Oracle Intelligent Agent resource.
Action: Check the secondary error.
FS-10149 Failed to remove cluster disk from the group
Cause: Unable to remove a cluster disk from a group.
Action: Check the secondary error.