Skip Headers
Oracle® Fail Safe Error Messages
Release 3.4.2 for Microsoft Windows

Part Number E14974-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
PDF · Mobi · ePub

2.5 FS-10200 to FS-10249

FS-10203 Unable to change the group for the disk resource %s because it depends on cluster resource %s
Cause: Unable to move the disk resource to another group because the disk depends on a cluster resource in its current group.
Action: Either add the resource to the group where the disk is, or, before adding the resource, use MSCS Cluster Administrator to change the disk resource, and all resources on which it depends, to the group where it is looking for the resource.
FS-10204 No more list items are in the persistent cluster registry
Cause: The item requested cannot be returned because the end of the list in the persistent cluster registry has been reached.
Action: This is informational status to the calling component; no action is necessary.
FS-10205 Cannot move the agent configuration files if the agent is online
Cause: The agent is online and therefore the configuration files cannot be moved.
Action: Take the agent offline and try moving the configuration files again.
FS-10209 Unable to get the database version for database resource %s
Cause: Unable to get the version of the specified database. This error can occur when the database is offline.
Action: Bring the database online and then retry the operation. Check the secondary error.
FS-10210 Failed to authenticate user %s. You must specify a domain account
Cause: Failed to authenticate the client because the account is not a domain account.
Action: Log in to the server using a domain account.
FS-10211 Failed to authenticate user %s. The user must have Administrator privileges on all cluster nodes
Cause: Failed to authenticate the client because the account does not have Administrator privileges on all cluster nodes.
Action: Make sure that the account you use to log in to the manager has Administrator privileges on all cluster nodes.
FS-10212 Oracle Services for MSCS must be installed under the same user account on all nodes of the cluster
Cause: Oracle Services for MSCS was not installed under the same user account on all nodes of the cluster.
Action: Check the secondary messages to determine which nodes are different, and run the Oracle Services for MSCS Security Setup utility on the nodes that need to be changed. To run the Oracle Services for MSCS utility, from the Windows taskbar, click Start, then Programs, then Oracle - Oracle_Home, then Oracle Services for MSCS Security Setup.
FS-10213 Oracle Services for MSCS is installed under user account %s on node %s
Cause: This is an informational message.
Action: No action is needed.
FS-10218 Resource %s needs to be taken offline in order to add a required dependency on %s. Do you want bring %s offline?
Cause: Cannot add a dependency to a resource that is online.
Action: Click Yes in the error message window if you want Oracle Services for MSCS to attempt to take the resource offline, add the dependency, and bring it back online. Click No if you do not want to add the dependency.
FS-10219 Resource %s needs to be taken offline in order to add a required dependency on %s
Cause: The specified resource is missing the required dependency and must be taken offline in order to add the dependency.
Action: Run the Verify Group operation interactively, which will prompt you to take the specified resource offline before adding the necessary dependency.
FS-10220 Network name %s maps to IP address %s in the cluster resource but maps to IP address %s on the system
Cause: An IP address mapping error has occurred.
Action: The cluster and the system must have the same IP address mapping for a network name. Check that either the network name server or the local host file has the same IP address mapping as the cluster.
FS-10221 Group %s was created; however, the group has the following problems:
Cause: The group was created; however, an address mapping error exists between the IP address and network name.
Action: The cluster and the system must have the same IP address mapping for a network name. Check that either the network name server or the local host file has the same IP address mapping as the cluster. (See the Oracle Fail Safe Concepts and Administration Guide for details.)
FS-10222 Cannot resolve network name %s to an IP address on node %s
Cause: The host name resolver (gethostbyname) cannot resolve the network name.
Action: Check to see if the network name is defined in the network administration database used for network name resolution.
FS-10223 Cannot resolve network name %s to an IP address on the system for validation due to a secondary error
Cause: The host name resolver (gethostbyname) cannot resolve the network name due to the problem noted in the secondary error.
Action: Look up the cause for the secondary error in the Windows Sockets definition file or manual.
FS-10224 The group %s does not contain both a network name and an IP address resource
Cause: The specified group does not contain both a network name and an IP address resource.
Action: Add a network name resource, an IP address resource, or both to the group.
FS-10225 The IP address %s resolves to host %s (Winsock) but has a dependent network name (Netbios) in cluster of %s
Cause: For the specified IP address, there is an inconsistency between the host and network names. The specified IP address has a host name resolved through the Windows Socket (Winsock) function that is different from the network name that is defined in the cluster.
Action: Resolve the discrepancy by either changing the Winsock definition (DNS or host file) or the network name definition in the cluster.
FS-10226 The resource %s requires a dependent network but one could not be located in the group %s
Cause: The specified resource requires a network name and IP address in its dependency list, but none could be found.
Action: Add a network name resource, an IP address resource, or both to the group and map the necessary dependencies to the specified resource.
FS-10227 The resource %s requires a cluster disk that could not be found in the group %s
Cause: The specified resource requires a cluster disk. However, that disk could not be found in the group.
Action: Remove the failing resource from the group and then try to add it again.
FS-10228 The resource %s requires cluster disk %s that is not in group %s
Cause: The specified resource requires the specified cluster disk. However, the specified cluster disk is not in the group.
Action: Either add the cluster disk to the specified group or remove the failing resource from the group and then try to add it again.
FS-10229 Resource %s does not have a dependency on a network name resource
Cause: The specified resource is missing the required network name dependency.
Action: Run the Verify Group operation again to make the specified resource dependent on a network name resource.
FS-10230 The Oracle Net listener %s uses a host name in the host address parameter. It must be converted to use an IP address
Cause: Oracle Services for MSCS requires all Oracle Net listeners that have been started to use an IP address.
Action: See the secondary message.
FS-10231 The listener is currently running
Cause: This is an informational message.
Action: See the secondary message.
FS-10232 The listener is currently stopped
Cause: This is an informational message.
Action: See the secondary message.
FS-10233 Do you want to stop the listener, convert the host name to an IP address, and then start the listener again?
Cause: Oracle Services for MSCS requires all Oracle Net listeners that have been started to use an IP address.
Action: Click Yes in the error message window if you want Oracle Services for MSCS Server to stop the listener, convert the host name to an IP address, and restart the listener.
FS-10234 Do you want Oracle Services for MSCS to convert the host name to an IP address and start the listener?
Cause: Oracle Services for MSCS requires all Oracle Net listeners that have been started to use an IP address.
Action: Click Yes in the error message window if you want Oracle Services for MSCS to convert the host name to an IP address and start the listener.
FS-10235 It is necessary to stop the listener %s to perform the related action
Cause: This listener must be stopped so that the related action can be performed.
Action: See the secondary message.
FS-10236 Password cannot be changed when the database is offline. Bring the database online before changing the password
Cause: An attempt has been made to change the password for a database when the database is not online.
Action: Bring the database online before changing the database password.
FS-10238 Password for database user %s was not changed
Cause: An attempt has been made to change the password for the specified database user.
Action: See the secondary error.
FS-10240 Failed to reconfigure Oracle Net listener %s to use an IP address
Cause: Failed to reconfigure the specified Oracle Net listener to use an IP address.
Action: Look at the configuration of all Oracle Net listeners. Try to manually reconfigure all Oracle Net listeners to use IP addresses.
FS-10241 The Oracle Net listener %s must be converted to use an IP address for the current operation to proceed
Cause: Oracle Services for MSCS requires all Oracle Net listeners that have been started to use an IP address.
Action: Reconfigure the listeners on the system and make sure that all Oracle Net listeners that have been started use IP addresses.
FS-10242 Failed to get the IP address of host %s
Cause: Failed to get the IP address of the specified host.
Action: Check the name service of the TCP/IP configuration on your system.
FS-10243 The attempted operation is not supported by this version of the database
Cause: The database version does not support the attempted operation.
Action: Use the correct version of the database for this operation.
FS-10244 The database instance %s has the unsupported AUTOSTART option turned on. Do you want to change it?
Cause: The database instance has the variable ORA_SID_AUTOSTART turned on (set to TRUE) in the Windows registry. This option must be turned off (set to FALSE) for the database to be made fail-safe.
Action: Click Yes in the error message window if you want Oracle Services for MSCS to change the setting in the Windows registry. Click No if you want to change the setting yourself.
FS-10245 The database instance %s has the unsupported SHUTDOWN option turned on. Do you want to change it?
Cause: The database instance has the variable ORA_sid_SHUTDOWN turned on (set to TRUE) in the Windows registry. This option must be turned off (set to FALSE) for the database to be made fail-safe.
Action: Click Yes in the error message window if you want Oracle Services for MSCS to change the setting in the Windows registry. Click No if you want to change the setting yourself.
FS-10246 You have declined the action to change the %s listener. You may encounter problems when starting this listener
Cause: You have declined the action to change the Oracle Net listener to use the IP address.
Action: No further action is needed for now; before you start this listener, change it to use the IP address.
FS-10247 The database parameter file %s specified for this operation will override the parameter file value in the registry
Cause: The database parameter file value in the registry is different than the user input value. This operation will use the user input value.
Action: This is an informational message. No action is needed.
FS-10248 At registry key %s, value of %s is %s
Cause: This is the registry value of the database parameter file, obtained from the specified registry location.
Action: This is an informational message. No action is needed.
FS-10249 The instance name %s specified for this operation is not the same as the instance %s found in the parameter file
Cause: The SID value in the parameter file is different than the user input value.
Action: Resolve the difference and run this operation again.