Skip Headers
Oracle® Fail Safe Error Messages
Release 3.4.2 for Microsoft Windows

Part Number E14974-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
PDF · Mobi · ePub

2.9 FS-10400 to FS-10449

FS-10400 The database uses a nonclustered disk for archive log file %s
Cause: The database uses a nonclustered (nonshared) disk for the specified archive log file.
Action: For a single-instance database to be configured for high availability, all database files must be stored on shared cluster disks. Move the database files to shared cluster disks.
FS-10401 %s : The customized Is Alive query failed on database instance %s with error %s
Cause: The Is Alive query failed on the database instance.
Action: Verify that the Is Alive query that you specified works on the database instance.
FS-10402 Attempt to start database %s returned ORA-29702 error. After a delay of %d seconds, the operation will be tried again.
Cause: The active LMON process caused the attempt to restart the database instance to fail. Oracle Services for MSCS will delay the operation for the specified number of seconds and then try again.
Action: If the database instance still fails to start after the delay, then check the Oracle LMON trace files for errors.
FS-10403 The database uses a nonclustered disk for a Data Guard broker configuration file %s
Cause: The database uses the specified nonclustered (nonshared) disk for a Data Guard broker configuration file.
Action: For a single-instance database to be configured for high availability, all database files must be stored on shared cluster disks. Move the database files to shared cluster disks.
FS-10404 The database uses a nonclustered disk in one of the system parameters. Value of parameter is %s
Cause: One of the following system parameters specifies a nonclustered disk: udump, cdump, bdump, db_recovery_file_dest, or audit_file_dest.
Action: Either make sure that the specified directories exist on all the nodes or change the system parameters so that clustered disks are used.
FS-10408 %s : Modifying virtual server configuration for database %s
Cause: Modifying the virtual server configuration for the specified database.
Action: This is an informational message. No action is needed.
FS-10409 %s : Deleting resource information for database %s
Cause: Deleting the resource information for the specified database.
Action: This is an informational message. No action is needed.
FS-10410 %s : Open connection to database instance %s failed with error %s
Cause: The open connection to the database instance failed.
Action: Verify that the connection information, including user name and password, is correct.
FS-10411 %s : The query to get the value of parameter %s failed for database instance %s with error %s
Cause: The get parameter query failed for the specified database instance.
Action: Report the problem to your Oracle support representative.
FS-10412 %s : The query to alter the value of parameter %s failed for database instance %s with error %s"
Cause: The alter parameter query failed for the specified database instance.
Action: Report the problem to your Oracle support representative.
FS-10413 Error found in Oracle Net on node %s; the group listener needs to be taken offline. Do you want it to be fixed?
Cause: The verify operation found a problem with the Oracle Net configuration files.
Action: Click Yes in the error message window if you want Oracle Services for MSCS to attempt to fix the problem. Click No if you want to try to fix the problem yourself. If you click No, the verify operation will continue. See the Oracle Fail Safe Concepts and Administration Guide for suggestions on how to troubleshoot Oracle Net configuration problems.
FS-10414 Error found in Oracle Net; database(s) and listener need to be taken offline and moved to %s. Do you want it to be fixed?
Cause: The verify operation found a problem with the Oracle Net configuration files.
Action: Click Yes in the error message window if you want Oracle Services for MSCS to attempt to fix the problem. Click No if you want to try to fix the problem yourself. If you click No, the verify operation will continue. See the Oracle Fail Safe Concepts and Administration Guide for suggestions on how to troubleshoot Oracle Net configuration problems.
FS-10415 Error found in Oracle Net on node %s; database needs to be taken offline. Do you want it to be fixed?
Cause: The verify operation found a problem with the Oracle Net configuration files.
Action: Click Yes in the error message window if you want Oracle Services for MSCS to attempt to fix the problem. Click No if you want to try to fix the problem yourself. If you click No, the verify operation will continue. See the Oracle Fail Safe Concepts and Administration Guide for suggestions on how to troubleshoot Oracle Net configuration problems.
FS-10416 Error found in Oracle Net on node %s. Do you want it to be fixed?
Cause: The verify operation found a problem with the Oracle Net configuration files.
Action: Click Yes in the error message window if you want Oracle Services for MSCS to attempt to fix the problem. Click No if you want to try to fix the problem yourself. If you click No, the verify operation will continue. See the Oracle Fail Safe Concepts and Administration Guide for suggestions on how to troubleshoot Oracle Net configuration problems.
FS-10417 Bringing the resource %s online
Cause: Bringing the specified resource online.
Action: This is an informational message. No action is needed.
FS-10421 Set remote_login_passwordfile parameter to %s in %s for appropriate authentication
Cause: The remote_login_passwordfile parameter in the initialization parameter file (init.ora) either has been set to none for operating system authentication, or has been set to exclusive for user name and password authentication.
Action: This is an informational message. No action is needed.
FS-10422 When using operating system authentication, the remote_login_passwordfile parameter must be set to none
Cause: The database is using operating system authentication. The remote_login_passwordfile in the initialization parameter file (init.ora) must be set to none.
Action: Modify the initialization parameter file to set the remote_login_passwordfile parameter to none. Then click Yes. Otherwise, select No to cancel the operation. If you choose to use another value for the parameter, you must supply the user name and password when making a database fail-safe.
FS-10423 Modify the parameter in the %s file on node %s and click Yes to continue or No to cancel the operation
Cause: If the database is using operating system authentication, then the remote_login_passwordfile in the initialization parameter file must be set to none. If the database is using user name and password authentication, then the remote_login_passwordfile in the initialization parameter file must be set to exclusive.
Action: Modify the initialization parameter file to set the remote_login_passwordfile parameter to the appropriate value. Then click Yes. Otherwise, select No to quit the operation.
FS-10424 Checking whether the database %s is online
Cause: Checking that the database instance is up and running. If not, it will be started.
Action: This is an informational message. No action is needed.
FS-10425 Querying the disks used by the database %s
Cause: Querying the disk or disks used by the database, verifying that they are cluster disks, and then moving the disks to the group or creating the disks in the group.
Action: This is an informational message. No action is needed.
FS-10426 Adding the database resource %s to group %s
Cause: Adding an Oracle database resource for the instance.
Action: This is an informational message. No action is needed.
FS-10427 Creating database instance %s for Oracle Net service name %s
Cause: Creating the database instance for the specified Oracle Net service name.
Action: This is an informational message. No action is needed.
FS-10428 Starting to remove resource %s from group %s
Cause: Removing the specified resource from the specified group.
Action: This is an informational message. No action is needed.
FS-10430 %s : Modifying virtual server configuration for resource %s
Cause: Modifying the virtual server configuration for the specified resource.
Action: This is an informational message. No action is needed.
FS-10431 %s : Deleting resource information for resource %s
Cause: Deleting the resource information for the specified resource.
Action: This is an informational message. No action is needed.
FS-10432 Resource %s was removed from group %s
Cause: The specified resource has been removed from the specified group.
Action: This is an informational message. No action is needed.
FS-10433 Deleting the database instance %s on node %s
Cause: Deleting the database instance on the specified node.
Action: This is an informational message. No action is needed.
FS-10434 Deleting the database resource %s from group %s
Cause: Deleting the specified database resource from the specified group.
Action: This is an informational message. No action is needed.
FS-10435 Moving the database disk %s to disk group %s
Cause: Moving the database disk to a predefined group.
Action: This is an informational message. No action is needed.
FS-10436 Failed to start Windows service %s
Cause: The specified Windows service could not be started.
Action: Check the secondary message.
FS-10437 Failed to create Windows service %s
Cause: The specified Windows service could not be created.
Action: Check the secondary message.
FS-10438 Failed to find Windows service %s
Cause: The specified Windows service could not be found.
Action: Check the secondary message.
FS-10439 Failed to find file %s
Cause: The specified file could not be found.
Action: Check the secondary message.
FS-10440 Failed to open the Service Control Manager
Cause: The Service Control Manager could not be opened.
Action: Check the secondary message.
FS-10441 Failed to enumerate the Windows services
Cause: Could not retrieve the list of Windows services.
Action: Check the secondary message.
FS-10442 Failed to find directory %s
Cause: The specified directory could not be found.
Action: Check the secondary message.
FS-10443 Failed to create directory %s
Cause: The specified directory could not be created.
Action: Check the secondary message.
FS-10444 Invalid directory syntax specified: %s
Cause: The directory specification was specified with invalid syntax.
Action: Check the syntax of the directory specification.
FS-10445 Failed to query Windows service %s
Cause: Failed to query the specified Windows service.
Action: Check the secondary message.
FS-10446 Failed to create file %s
Cause: The specified file cannot be created.
Action: Check the secondary message.
FS-10447 Failed to get the size of file %s
Cause: Cannot get the size of the specified file.
Action: Check the secondary message.
FS-10448 Failed to read from file %s
Cause: A read operation on the specified file failed.
Action: Check the secondary message.
FS-10449 Created directory %s
Cause: Created the specified directory.
Action: This is an informational message. No action is needed.