Skip Headers
Oracle® Database Net Services Reference
12c Release 1 (12.1)

E17611-12
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
PDF · Mobi · ePub

7 Oracle Net Listener Parameters in the listener.ora File

This chapter provides a complete listing of the listener.ora file configuration parameters.

This chapter contains the following topics:

Overview of Oracle Net Listener Configuration File

Oracle Net Listener configuration, stored in the listener.ora file, consists of the following elements:

  • Name of the listener

  • Protocol addresses that the listener is accepting connection requests on

  • Valid nodes that the listener allows to register with the database

  • Database services

  • Control parameters

Dynamic service registration, eliminates the need for static configuration of supported services. However, static service configuration is required if you plan to use Oracle Enterprise Manager Cloud Control.

By default, the listener.ora file is located in the ORACLE_HOME/network/admin directory. The listener.ora file can also be stored the following locations:

  • The directory specified by the TNS_ADMIN environment variable or registry value.

  • On Linux and UNIX operating systems, it is the global configuration directory. For example, on the Oracle Solaris operating system, the directory is /var/opt/oracle.

    See Also:

It is possible to configure multiple listeners, each with a unique name, in one listener.ora file. Multiple listener configurations are possible because each of the top-level configuration parameters has a suffix of the listener name or is the listener name itself.

Notes:

  • It is often useful to configure multiple listeners in one listener.ora file. However, Oracle recommends running only one listener for each node in most customer environments.

  • Oracle Net Services supports the IFILE parameter in the listener.ora file, with up to three levels of nesting. The parameter is added manually to the file. The following is an example of the syntax:

    IFILE=/tmp/listener_em.ora
    IFILE=/tmp/listener_cust1.ora
    IFILE=/tmp/listener_cust2.ora 
    

    Refer to Oracle Database Reference for additional information.

Example 7-1 shows a listener.ora file for a listener named LISTENER, which is the default name of the listener.

Example 7-1 listener.ora File

LISTENER=
  (DESCRIPTION=
    (ADDRESS_LIST=
      (ADDRESS=(PROTOCOL=tcp)(HOST=sale-server)(PORT=1521))
      (ADDRESS=(PROTOCOL=ipc)(KEY=extproc))))

Protocol Address Parameters

The protocol address section of the listener.ora file defines the protocol addresses on which the listener is accepting connection requests. This section describes the most common parameters used in protocol addresses. The ADDRESS_LIST parameter is also supported.

See Also:

Chapter 4, "Protocol Address Configuration" for additional information about the ADDRESS_LIST parameter

This section lists and describes the following parameters:

ADDRESS

Purpose

To specify a single listener protocol address.

Usage Notes

Put this parameter under the DESCRIPTION parameter.

Example

listener_name=
 (DESCRIPTION=
  (ADDRESS_LIST=
   (ADDRESS=(PROTOCOL=tcp)(HOST=hr-server)(PORT=1521))
   (ADDRESS=(PROTOCOL=tcp)(HOST=sales-server)(PORT=1521))))

See Also:

Chapter 4, "Protocol Address Configuration" for descriptions of the correct parameters to use for each type of support protocol

DESCRIPTION

Purpose

To contain listener protocol addresses.

Example

listener_name=
 (DESCRIPTION=
  (ADDRESS_LIST=
    (ADDRESS=(PROTOCOL=tcp)(HOST=hr-server)(PORT=1521))
    (ADDRESS=(PROTOCOL=tcp)(HOST=sales-server)(PORT=1521))))

IP

Purpose

To determine which IP address the listener listens on when a host name is specified.

Usage Notes

This parameter is only applicable when the HOST parameter specifies a host name.

Values

  • first

    Listen on the first IP address returned by the DNS resolution of the host name. If the user wants the listener to listen on the first IP to which the specified host name resolves, then the address must be qualified with (IP=first).

  • v4_only

    Listen only on IPv4 addresses.

  • v6_only

    Listen only on IPv6 addresses.

Default

This feature is disabled by default.

Example

listener_name=
 (DESCRIPTION=
  (ADDRESS=(PROTOCOL=tcp)(HOST=rancode1-vip)(PORT=1522)(IP=v6_only))

QUEUESIZE

Purpose

To specify the number of concurrent connection requests that the listener can accept on a TCP/IP or IPC listening endpoint (protocol address).

Usage Notes

The number of concurrent connection requests is dependent on the platform and listener usage scenarios. If the listener is heavily-loaded, then set the parameter to a higher number.

Put this parameter at the end of the protocol address with its value set to the expected number of concurrent connection requests.

Default

The default number of concurrent connection requests is operating system specific.

Example

listener_name=
 (DESCRIPTION=
  (ADDRESS=(PROTOCOL=tcp)(HOST=hr-server)(PORT=1521)(QUEUESIZE=20)))

See Also:

Oracle Database Net Services Administrator's Guide for additional information about configuring this parameter

RECV_BUF_SIZE

Purpose

To specify, in bytes, the buffer space for receive operations of sessions.

Usage Notes

Put this parameter under the DESCRIPTION parameter or at the end of the protocol address with its value set to the expected number of bytes.

This parameter is supported by the TCP/IP, TCP/IP with SSL, and SDP protocols.

Note:

Additional protocols might support this parameter on certain operating systems. Refer to the operating system-specific documentation for information about additional protocols that support this parameter.

Default

The default value for this parameter is operating system specific. The default for the Linux operating system is 110592 bytes (108 KB).

Example

listener_name=
  (DESCRIPTION=
    (ADDRESS_LIST=
      (ADDRESS=(PROTOCOL=tcp)(HOST=sales-server)(PORT=1521)
        (RECV_BUF_SIZE=11784))
      (ADDRESS=(PROTOCOL=ipc)(KEY=extproc)
        (RECV_BUF_SIZE=11784))))
listener_name=
  (DESCRIPTION=
    (ADDRESS_LIST=
      (RECV_BUF_SIZE=11784))
      (ADDRESS=(PROTOCOL=tcp)(HOST=sales-server)(PORT=1521)
      (ADDRESS=(PROTOCOL=ipc)(KEY=extproc))))

See Also:

Oracle Database Net Services Administrator's Guide for additional information about configuring this parameter

SEND_BUF_SIZE

Purpose

To specify, in bytes, the buffer space for send operations of sessions.

Usage Notes

Put this parameter under the DESCRIPTION parameter or at the end of the protocol address.

This parameter is supported by the TCP/IP, TCP/IP with SSL, and SDP protocols.

Note:

Additional protocols might support this parameter on certain operating systems. Refer to operating system-specific documentation for additional information about additional protocols that support this parameter.

Default

The default value for this parameter is operating system specific. The default for the Linux operating system is 110592 bytes (108 KB).

Example

listener_name=
  (DESCRIPTION=
    (ADDRESS_LIST=
      (ADDRESS=(PROTOCOL=tcp)(HOST=sales-server)(PORT=1521)
       (SEND_BUF_SIZE=11280))
      (ADDRESS=(PROTOCOL=ipc)(KEY=extproc)
       (SEND_BUF_SIZE=11280))))
listener_name=
  (DESCRIPTION=
    (SEND_BUF_SIZE=11280)
    (ADDRESS_LIST=
      (ADDRESS=(PROTOCOL=tcp)(HOST=sales-server)(PORT=1521)
      (ADDRESS=(PROTOCOL=ipc)(KEY=extproc))))

See Also:

Oracle Database Net Services Administrator's Guide for additional information about configuring this parameter

Connection Rate Limiter Parameters

The connection rate limiter feature in Oracle Net Listener enables a database administrator to limit the number of new connections handled by the listener. When this feature is enabled, Oracle Net Listener imposes a user-specified maximum limit on the number of new connections handled by the listener every second.

Depending on the configuration, the rate can be applied to a collection of endpoints, or to a specific endpoint.

This feature is controlled through the following listener.ora configuration parameters:

CONNECTION_RATE_listener name

Purpose

To specify a global rate that is enforced across all listening endpoints that are rate-limited.

Usage Notes

When this parameter is specified, it overrides any endpoint-level numeric rate values that might be specified.

Syntax

CONNECTION_RATE_listener_name=number_of_connections_per_second

RATE_LIMIT

Purpose

To indicate that a particular listening endpoint is rate limited.

Usage Notes

The parameter is specified in the ADDRESS section of the listener endpoint configuration.

Syntax

LISTENER=
   (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521)(RATE_LIMIT=yes))
  • When the RATE_LIMIT parameter is set to yes for an endpoint, that endpoint is included in the enforcement of the global rate configured by the CONNECTION_RATE_listener_name parameter. The global rate limit is enforced individually at each endpoint that has RATE_LIMIT set to yes.

  • Dynamic endpoints for listeners managed by Oracle Clusterware have the RATE_LIMIT parameter set to yes.

  • When the RATE_LIMIT parameter is set to a value greater than 0, then the rate limit is enforced at that endpoint level.

Examples

The following examples use the CONNECTION_RATE_listener name and RATE_LIMIT parameters.

Example 1

CONNECTION_RATE_LISTENER=10

LISTENER= 
  (ADDRESS_LIST=
   (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521)(RATE_LIMIT=yes))
   (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1522)(RATE_LIMIT=yes))
   (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1523)))

In the preceding example, the global rate of new connections is enforced separately for each endpoint. Connections through port 1521 are limited at 10 every second, and the connections through port 1522 are also separately limited at 10 every second. Connections through port 1523 are not limited.

Example 2

LISTENER= (ADDRESS_LIST=
   (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521)(RATE_LIMIT=5))
   (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1522)(RATE_LIMIT=10))
   (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1523))
   )

In the preceding example, the connection rates are enforced at the endpoint level. A maximum of 5 connections are processed through port 1521 every second. The limit for connections through port 1522 is 10 every second. Connections through port 1523 are not limited.

Note:

The global CONNECTON_RATE_listener_name parameter is not specified in the preceding configuration. If it is specified, then the limits on ports 1521 and 1522 are ignored, and the global value is used instead.

Control Parameters

This section describes the following parameters that control the behavior of the listener:

ADMIN_RESTRICTIONS_listener_name

Purpose

To restrict runtime administration of the listener.

Usage Notes

Setting ADMIN_RESTRICTIONS_listener_name=on disables the runtime modification of parameters in listener.ora. That is, the listener refuses to accept SET commands that alter its parameters. To change any of the parameters in listener.ora, including ADMIN_RESTRICTIONS_listener_name itself, modify the listener.ora file manually and reload its parameters using the RELOAD command for the new changes to take effect without explicitly stopping and restarting the listener.

Default

off

Example

ADMIN_RESTRICTIONS_listener=on

CRS_NOTIFICATION_listener_name

Purpose

To set notification.

Usage Notes

By default, the Oracle Net listener notifies Cluster Ready Services (CRS) when it is started or stopped. These notifications allow CRS to manage the listener in an Oracle Real Application Clusters environment. This behavior can be prevented by setting the CRS_NOTIFICATION_listener_name parameter to off.

Default

on

Values

on | off

DEDICATED_THROUGH_BROKER_listener_name

Purpose

To enable the server to spawn a thread or process when a connection to the database is requested through the listener.

Default

off

Values

on | off

Example

DEDICATED_THROUGH_BROKER_listener=on

DEFAULT_SERVICE_listener_name

Purpose

To enable users to connect to the database without having to specify a service name from the client side.

Usage Notes

In Oracle Database 12c, when a client tries to connect to the database the connection request passes through the listener. The listener may be servicing several different databases. If a service name is configured in this parameter, then users may not necessarily need to specify a service name in the connect syntax. If a user specifies a service name, then the listener connects the user to that specific database, otherwise the listener connects to the service name specified by the DEFAULT_SERVICE_listener_name parameter. For container databases, the client must explicitly specify the service name.

See Also:

Oracle Database Net Services Administrator's Guide for additional information about the Easy Connect naming method

Default

There is no default value for the DEFAULT_SERVICE_listener_name parameter. If this parameter is not configured and a user does not specify a fully-qualified service name in the connect syntax, then the connection attempt fails. This parameter only accepts one value.

Example

DEFAULT_SERVICE_listener=sales.us.example.com

INBOUND_CONNECT_TIMEOUT_listener_name

Purpose

To specify the time, in seconds, for the client to complete its connect request to the listener after the network connection had been established.

Usage Notes

If the listener does not receive the client request in the time specified, then it terminates the connection. In addition, the listener logs the IP address of the client and an ORA-12525:TNS: listener has not received client's request in time allowed error message to the listener.log file.

To protect both the listener and the database server, Oracle recommends setting this parameter in combination with the SQLNET.INBOUND_CONNECT_TIMEOUT parameter in the sqlnet.ora file. When specifying values for these parameters, consider the following recommendations:

  • Set both parameters to an initial low value.

  • Set the value of the INBOUND_CONNECT_TIMEOUT_listener_name parameter to a lower value than the SQLNET.INBOUND_CONNECT_TIMEOUT parameter.

For example, you can set the INBOUND_CONNECT_TIMEOUT_listener_name parameter to 2 seconds and the INBOUND_CONNECT_TIMEOUT parameter to 3 seconds. If clients are unable to complete connections within the specified time due to system or network delays that are normal for the particular environment, then increment the time as needed.

Default

60 seconds

Example

INBOUND_CONNECT_TIMEOUT_listener=2

MAX_ALL_CONNECTIONS_listener_name

Purpose

To specify the maximum number of concurrent registration and client connection sessions that can be supported by Oracle Net Listener.

Usage Notes

This number includes registration connections from databases, and ongoing client connection establishment requests. After a connection is established, the clients do not maintain a connection to the listener. This limit only applies to client connections that are in the initial connection establishment phase from a listener perspective.

Default

Operating system-specific

Example

MAX_ALL_CONNECTIONS_listener=40

MAX_REG_CONNECTIONS_listener_name

Purpose

To specify the maximum number of concurrent registration connection sessions that can be supported by Oracle Net Listener.

Default

512

Example

MAX_REG_CONNECTIONS_listener=20

REGISTRATION_EXCLUDED_NODES_listener_name

Purpose

To specify the list of nodes that cannot register with the listener.

Usage Notes

The list can include host names or CIDR notation for IPv4 and IPv6 addresses. The wildcard format (*) is supported for IPv4 addresses. The presence of a host name in the list results in the inclusion of all IP addresses mapped to the host name. The host name should be consistent with the public network interface.

If the REGISTRATION_INVITED_NODES_listener_name parameter and the REGISTRATION_EXCLUDED_NODES_listener_name parameter are set, then the REGISTRATION_EXCLUDED_NODES_listener_name parameter is ignored.

Values

Valid nodes and subnet IP addresses or names.

Example

REGISTRATION_EXCLUDED_NODES_listener = (10.1.26.*, 10.16.40.0/24, \
                                       2001:DB8:3eff:fe38, node2)

REGISTRATION_INVITED_NODES_listener_name

Purpose

To specify the list of node that can register with the listener.

Usage Notes

The list can include host names or CIDR notation for IPv4 and IPv6 addresses. The wildcard format (*) is supported for IPv4 addresses. The presence of a host name in the list results in the inclusion of all IP addresses mapped to the host name. The host name should be consistent with the public network interface.

If the REGISTRATION_INVITED_NODES_listener_name parameter and the REGISTRATION_EXCLUDED_NODES_listener_name parameter are set, then the REGISTRATION_EXCLUDED_NODES_listener_name parameter is ignored.

Values

Valid nodes and subnet IP addresses or names.

Example

REGISTRATION_INVITED_NODES_listener = (10.1.35.*, 10.1.34.0/24, \
                                      2001:DB8:fe38:7303, node1)

REMOTE_REGISTRATION_ADDRESS_listener_name

Purpose

To secure registration requests through dedicated secure registration endpoints for SCAN listeners.

Usage Notes

The registration endpoint is on a private network within the cluster. All remote registration requests coming in on normal listening endpoints are redirected to the registration endpoint. Any system which is not a part of the cluster cannot connect to the endpoint.

Default

This parameter is configured internally in the SCAN listener to restrict registrations to the private network. The value of this parameter should not be modified or specified explicitly. The only supported explicit setting is for turning this feature off by setting the value to OFF. The value is OFF in non-SCAN listeners.

Values

off

Example

REMOTE_REGISTRATION_ADDRESS_listener=off

SAVE_CONFIG_ON_STOP_listener_name

Purpose

To specify whether runtime configuration changes are saved to the listener.ora file.

Usage Notes

When you set the parameter to true, any parameters that were modified while the listener was running using the Listener Control utility SET command are saved to the listener.ora file when the STOP command is issued. When you set the parameter to false, the Listener Control utility does not save the runtime configuration changes to the listener.ora file.

Default

false

Values

true | false

Example

SAVE_CONFIG_ON_STOP_listener=true

SSL_CLIENT_AUTHENTICATION

Purpose

To specify whether a client is authenticated using the Secure Sockets Layer (SSL).

Usage Notes

The database server authenticates the client. Therefore, this value should be set to false. If this parameter is set to true, then the listener attempts to authenticate the client, which can result in a failure.

Default

true

Values

true | false

Example

SSL_CLIENT_AUTHENTICATION=false

SUBSCRIBE_FOR_NODE_DOWN_EVENT_listener_name

Purpose

To subscribe to Oracle Notification Service (ONS) notifications for downed events.

Usage Notes

By default, the listener subscribes to the ONS node down event on startup, if ONS is available. This subscription enables the listener to remove the affected service when it receives node down event notification from ONS. The listener uses asynchronous subscription for the event notification. Alter this behavior by setting SUBSCRIBE_FOR_NODE_DOWN_EVENT_listener_name=off in listener.ora.

Default

on

Values

on | off

USE_SID_AS_SERVICE_listener_name

Purpose

To enable the system identifier (SID) in the connect descriptor to be interpreted as a service name when a user attempts a database connection.

Usage Notes

Database clients with earlier releases of Oracle Database that have hard-coded connect descriptors can use this parameter to connect to a container or pluggable database.

When the database is an Oracle Database 12c container database, the client must specify a service name in order to connect to it. Setting this parameter to on instructs the listener to use the SID in the connect descriptor as a service name and connect the client to the specified database.

Do not use the USE_SID_AS_SERVICE_listener_name parameter with SCAN listeners. The parameter is used for connecting directly through local listeners.

Default

off

Example

USE_SID_AS_SERVICE_listener=on

VALID_NODE_CHECKING_REGISTRATION_listener_name

Purpose

To determine whether valid node checking registration is performed, or the subnet is allowed.

Usage Notes

When set to on, valid node checking registration is performed at the listener for any incoming registration request, and only local IP addresses are allowed.

Default

on

Values

  • off | 0 to specify valid node checking registration is off, and no checking is performed.

  • on | 1 | local to specify valid node checking registration is on, and all local IP addresses can register. If a list of invited nodes is set, then all IP addresses, host names, or subnets in the list as well as local IP addresses are allowed.

  • subnet | 2 to specify valid node checking registration is on, and all machines in the local subnets are allowed to register. If a list of invited nodes is set, then all nodes in the local subnets as well as all IP addresses, host names and subnets in the list are allowed.

Example

VALID_NODE_CHECKING_REGISTRATION_listener=on

WALLET_LOCATION

Purpose

To specify the location of wallets.

Usage Notes

Wallets are certificates, keys, and trustpoints processed by SSL that allow for secure connections.

The key/value pair for Microsoft certificate store (MCS) omits the METHOD_DATA parameter because MCS does not use wallets. Instead, Oracle PKI (public key infrastructure) applications obtain certificates, trustpoints and private keys directly from the user's profile.

If an Oracle wallet is stored in the Microsoft Windows registry and the wallet's key (KEY) is SALESAPP, then the storage location of the encrypted wallet is HKEY_CURRENT_USER\SOFTWARE\ORACLE\WALLETS\SALESAPP\EWALLET.P12. The storage location of the decrypted wallet is HKEY_CURRENT_USER\SOFTWARE\ORACLE\WALLETS\SALESAPP\CWALLET.SSO.

Syntax

Table 7-1 shows the syntax for the WALLET_LOCATION parameter based on wallet storage location.

Table 7-1 Syntax for WALLET_LOCATION

Wallet Location Syntax

Oracle wallets on file system

WALLET_LOCATION=
  (SOURCE=
    (METHOD=file)
    (METHOD_DATA=
       (DIRECTORY=directory)
       [(PKCS11=TRUE/FALSE)]))

Microsoft certificate store

WALLET_LOCATION=
  (SOURCE=
     (METHOD=mcs))

Oracle wallets in the Microsoft Windows registry

WALLET_LOCATION=
   (SOURCE=
      (METHOD=reg)
      (METHOD_DATA=
         (KEY=registry_key)))

Entrust wallets

WALLET_LOCATION=
   (SOURCE=
      (METHOD=entr)
      (METHOD_DATA=
         (PROFILE=file.epf)
         (INIFILE=file.ini)))

Additional Parameters

The following additional parameters are available for WALLET_LOCATION:

  • SOURCE: Type of storage for wallets and storage location.

  • METHOD: Type of storage.

  • METHOD_DATA: Storage location.

  • DIRECTORY: Location of Oracle wallets on file system.

  • KEY: Wallet type and location in the Microsoft Windows registry.

  • PROFILE: Entrust profile file (.epf).

  • INIFILE: Entrust initialization file (.ini).

Default

None

Examples

Oracle wallets on file system:

WALLET_LOCATION=  
  (SOURCE=
      (METHOD=file)
      (METHOD_DATA=  
         (DIRECTORY=/etc/oracle/wallets/databases)))

Microsoft certificate store:

WALLET_LOCATION=
   (SOURCE=
     (METHOD=mcs))
   

Oracle Wallets in the Microsoft Windows registry:

WALLET_LOCATION=
   (SOURCE=
     (METHOD=REG)
     (METHOD_DATA=
        (KEY=SALESAPP)))

Entrust Wallets:

WALLET_LOCATION=
   (SOURCE=
     (METHOD=entr)
     (METHOD_DATA=
       (PROFILE=/etc/oracle/wallets/test.epf)
       (INIFILE=/etc/oracle/wallets/test.ini)))

ADR Diagnostic Parameters for Oracle Net Listener

Since Oracle Database 11g, Oracle Database includes an advanced fault diagnosability infrastructure for preventing, detecting, diagnosing, and resolving problems. The problems are critical errors such as those caused by database code bugs, metadata corruption, and customer data corruption.

When a critical error occurs, it is assigned an incident number, and diagnostic data for the error, such as traces and dumps, are immediately captured and tagged with the incident number. The data is then stored in the Automatic Diagnostic Repository (ADR), a file-based repository outside the database.

This section includes the parameters used when ADR is enabled. Non-ADR parameters listed in the listener.ora file are ignored when ADR is enabled. "Non-ADR Diagnostic Parameters for Oracle Net Listener" includes those used when ADR is disabled. ADR is enabled by default.

The following listener.ora parameters are used when ADR is enabled (when DIAG_ADR_ENABLED is set to on):

ADR_BASE_listener_name

Purpose

To specify the base directory that stores tracing and logging incidents when ADR is enabled.

Default

The default is ORACLE_BASE, or ORACLE_HOME/log if ORACLE_BASE is not defined.

Values

Any valid directory path to a directory with write permission.

Example

ADR_BASE_listener=/oracle/network/trace

DIAG_ADR_ENABLED_listener_name

Purpose

To indicate whether ADR tracing is enabled.

Usage Notes

When the DIAG_ADR_ENABLED_listener_name parameter is set to on, then ADR file tracing is used. When the DIAG_ADR_ENABLED_listener_name parameter is set to off, then non-ADR file tracing is used.

Default

on

Values

on | off

Example

DIAG_ADR_ENABLED_listener=on

LOGGING_listener_name

Purpose

To turn logging on or off.

Usage Notes

This parameter is also applicable when non-ADR tracing is used.

Default

on

Values

on | off

Example

LOGGING_listener=on

TRACE_LEVEL_listener_name

Purpose

To turn listener tracing on, at a specific level, or off.

Usage Notes

This parameter is also applicable when non-ADR tracing is used.

Default

off | 0

Values

  • off or 0 for no trace output

  • user or 4 for user trace information

  • admin or 10 for administration trace information

  • support or 16 for Oracle Support Services trace information

Example

TRACE_LEVEL_listener=admin

TRACE_TIMESTAMP_listener_name

Purpose

To add a time stamp in the form of dd-mmm-yyyy hh:mi:ss:mil to every trace event in the trace file for the listener.

Usage Notes

This parameter is used with the TRACE_LEVEL_listener_name parameter. This parameter is also applicable when non-ADR tracing is used.

Default

on

Values

  • on | true

  • off | false

Example

TRACE_TIMESTAMP_listener=true

Non-ADR Diagnostic Parameters for Oracle Net Listener

This section lists the parameters used when ADR is disabled. "ADR Diagnostic Parameters for Oracle Net Listener" includes the parameters when ADR is enabled.

Notes:

The default value of DIAG_ADR_ENABLED_listener_name is on. Therefore, the DIAG_ADR_ENABLED_listener_name parameter must explicitly be set to off to use non-ADR tracing.

LOG_DIRECTORY_listener_name

Purpose

To specify the destination directory of the listener log file.

Usage Notes

Use this parameter when ADR is not enabled.

Default

ORACLE_HOME/network/log

Example

LOG_DIRECTORY_listener=/oracle/network/admin/log

LOG_FILE_listener_name

Purpose

To specify the name of the log file for the listener.

Usage Notes

Use this parameter when ADR is not enabled.

Default

listener.log

Example

LOG_FILE_listener=list.log

TRACE_DIRECTORY_listener_name

Purpose

To specify the destination directory of the listener trace file.

Usage Notes

Use this parameter when ADR is not enabled.

Default

ORACLE_HOME/network/trace

Example

TRACE_DIRECTORY_listener=/oracle/network/admin/trace

TRACE_FILE_listener_name

Purpose

To specify the name of the trace file for the listener.

Usage Notes

Use this parameter when ADR is not enabled.

Default

listener.trc

Example

TRACE_FILE_listener=list.trc

TRACE_FILELEN_listener_name

Purpose

To specify the size of the listener trace files in kilobytes (KB).

Usage Notes

When the size is met, the trace information is written to the next file. The number of files is specified using the TRACE_FILENO_listener_name parameter. Use this parameter when ADR is not enabled.

Default

Unlimited

Example

TRACE_FILELEN_listener=100

TRACE_FILENO_listener_name

Purpose

To specify the number of trace files for listener tracing.

Usage Notes

When this parameter is set along with the TRACE_FILELEN_listener_name parameter, trace files are used in a cyclical fashion. The first file is filled first, then the second file, and so on. When the last file has been filled, the first file is re-used, and so on.

The trace file names are distinguished from one another by their sequence number. For example, if the default trace file of listener.trc is used, and this parameter is set to 3, then the trace files would be named listener1.trc, listener2.trc and listener3.trc.

In addition, trace events in the trace files are preceded by the sequence number of the file. Use this parameter when ADR is not enabled.

Default

1

Example

TRACE_FILENO_listener=3

Class of Secure Transports Parameters

The class of secure transports (COST) parameters specify a list of transports that are considered secure for administration and registration of a particular listener. The COST parameters identify which transports are considered secure for that installation and whether the administration of a listener requires secure transports. Configuring these parameters is optional.

The following are the COST parameters:

See Also:

Oracle Database Net Services Administrator's Guide for additional information about COST parameters and listener security

DYNAMIC_REGISTRATION_listener_name

Purpose

To enable or disable dynamic registration.

Usage Notes

Static registrations are not affected by this parameter.

Default

The default value is on. Unless this parameter is explicitly set to off, all registration connections are accepted.

Values

  • on: The listener accepts dynamic registration.

  • off: The listener refuses dynamic registration.

Example

DYNAMIC_REGISTRATION_listener_name=on

SECURE_CONTROL_listener_name

Purpose

To specify the transports on which control commands are to be serviced.

Usage Notes

If the SECURE_CONTROL_listener_name parameter is configured with a list of transport names, then the control commands are serviced only if the connection is one of the listed transports. Connections arriving by other transport protocols are refused. The following is an example:

SECURE_CONTROL_listener1 = (TCPS,IPC)

In the preceding example, administration requests are accepted only on TCPS and IPC transports.

If no values are entered for this parameter, then the listener accepts any connection on any endpoint.

Syntax

SECURE_CONTROL_listener_name = 
[(]transport1[,transport2, ....,transportn)]

In the preceding syntax, transport1, transport2, and transportn are valid, installed transport protocol names.

Example


LISTENER1=
 (DESCRIPTION=
    (ADDRESS_LIST=
      (ADDRESS=(PROTOCOL=tcp)(HOST=sales-server)(PORT=1521))
      (ADDRESS=(PROTOCOL=ipc)(KEY=extproc))
      (ADDRESS=(PROTOCOL=tcps)(HOST=sales-server)(PORT=1522))))
  SECURE_CONTROL_LISTENER1=tcps

SECURE_REGISTER_listener_name

Purpose

To specify the transports on which registration requests are to be accepted.

Usage Notes

If the SECURE_REGISTER_listener_name parameter is configured with a list of transport names, then only the connections arriving on the specified transports are able to register the service with the listener. Connections arriving by other transport protocols are refused. The following is an example:

SECURE_REGISTER_listener1 = (TCPS,IPC)

In the preceding example, registration requests are accepted only on TCPS and IPC transports.

If no values are entered for this parameter, then the listener accepts registration requests from any transport.

Syntax

SECURE_REGISTER_listener_name = 
[(]transport1[,transport2, ....,transportn)]

In the preceding example, transport1, transport2, and transportn are valid, installed transport protocol names.

If this parameter and SECURE_CONTROL_listener_name are configured, then they override the SECURE_PROTOCOL_listener_name parameter.

Example


LISTENER1=
 (DESCRIPTION=
    (ADDRESS_LIST=
      (ADDRESS=(PROTOCOL=tcp)(HOST=sales-server)(PORT=1521))
      (ADDRESS=(PROTOCOL=ipc)(KEY=extproc))
      (ADDRESS=(PROTOCOL=tcps)(HOST=sales-server)(PORT=1522))))
  SECURE_REGISTER_listener1=tcps

SECURE_PROTOCOL_listener_name

Purpose

To specify the transports on which administration and registration requests are accepted.

Usage Notes

If this parameter is configured with a list of transport names, then the control commands and service registration can happen only if the connection belongs to the list of transports.

If this parameter is not present and neither SECURE_CONTROL_listener_name or SECURE_REGISTER_listener_name are configured, then all supported transports accept control and registration requests.

If the SECURE_CONTROL_listener_name and SECURE_REGISTER_listener_name parameters are configured, then they override the SECURE_PROTOCOL_listener_name parameter.

Syntax

SECURE_PROTOCOL_listener_name = 
[(]transport1[,transport2, ....,transportn)]

In the preceding syntax, transport1, transport2, and transportn are valid, installed transport protocol names.

Example


LISTENER1=
 (DESCRIPTION=
    (ADDRESS_LIST=
      (ADDRESS=(PROTOCOL=tcp)(HOST=sales-server)(PORT=1521))
      (ADDRESS=(PROTOCOL=ipc)(KEY=extproc))
      (ADDRESS=(PROTOCOL=tcps)(HOST=sales-server)(PORT=1522))))
  SECURE_PROTOCOL_listener1=tcps

Using COST Parameters in Combination

COST parameters can also be used in combination to further control which transports accept service registration and control commands.

In Example 7-2, control commands are accepted only on the IPC channel and the TCPS transport, and service registrations are accepted only on an IPC channel.

Example 7-2 Combining COST Parameters

LISTENER1=
 (DESCRIPTION=
   (ADDRESS_LIST=
     (ADDRESS=(PROTOCOL=tcp)(HOST=sales-server)(PORT=1521))
     (ADDRESS=(PROTOCOL=ipc)(KEY=extproc))
     (ADDRESS=(PROTOCOL=tcps)(HOST=sales-server)(PORT=1522))))
  SECURE_CONTROL_listener1=(tcps,ipc)
  SECURE_REGISTER_listener1=ipc

In Example 7-3, control commands are accepted only on the TCPS transport, and service registrations are accepted only on the IPC channel.

Example 7-3 Combining COST Parameters

LISTENER1=
 (DESCRIPTION=
   (ADDRESS_LIST=
     (ADDRESS=(PROTOCOL=tcp)(HOST=sales-server)(PORT=1521))
     (ADDRESS=(PROTOCOL=ipc)(KEY=extproc))
     (ADDRESS=(PROTOCOL=tcps)(HOST=sales-server)(PORT=1522))))
  SECURE_CONTROL_listener1=tcps
  SECURE_PROTOCOL_listener1=ipc