|Oracle® Fusion Middleware Installation Guide for Oracle Identity Management
11g Release 1 (11.1.1)
Part Number E12002-05
This section discusses the following topics:
This topic explains the steps that are common to starting most Oracle Identity Management installations and configurations. It begins with starting the Installer and ends after you complete the steps on the Prerequisites Check screen.
Note:You must be logged in to the UNIX operating system as a non-root user to start the Installer.
This command to start the installation program applies to the following Oracle Identity Management Installers:
Oracle Identity Management 11g Release 1 (220.127.116.11.0).
Oracle Identity Management 11g Release 1 (18.104.22.168.0) patchset Installer.
Perform the following steps to start an Oracle Identity Management installation:
Start the Installer by executing one of the following commands:
After the Installer starts, the Welcome screen appears.
Continue the installation or patching process by clicking Next on the Welcome screen.
For more information about patching an Oracle Identity Management 22.214.171.124.0 installation to 126.96.36.199.0, see Patching the Oracle Identity Management 188.8.131.52.0 to 184.108.40.206.0.
If you are installing on a UNIX system, and if this is the first time any Oracle product is being installed on your system with the Oracle Universal Installer, you will be asked to provide the location of an inventory directory. This is where the installer will set up subdirectories and maintain inventory data for each Oracle product that is installed on this system.
Follow the instructions in Table 4-1 to configure the inventory directory information:
Table 4-1 Inventory Directory and Group Screens
Specify Inventory Directory
Specify the Oracle inventory directory and group permissions for that directory. The group must have write permissions to the Oracle inventory directory.
Click OK to continue.
Inventory Location Confirmation
Run the createCentralInventory.sh script as root.
Click OK to continue.
Note:If you do not want to use the central inventory, you can create the oraInst.loc file, add the custom location of the inventory, and run the runInstaller by using the following command:
runInstaller -invPtrLoc <full location to oraInst.loc>
This topic describes directories you must identify in most Oracle Identity Management installations and configurations—it does not describe one particular Installer screen. During installation, you will have to identify other component-specific directories not described in this topic.
The common directories described in this section include the following:
Identify the location of your Oracle Middleware Home directory. The Installer creates an Oracle Home directory for the component you are installing under the Oracle Middleware Home that you identify in this field. The Installer also creates an Oracle Common Home directory under the Oracle Middleware Home. The Oracle Common Home contains the binary and library files required for Oracle Enterprise Manager Fusion Middleware Control and Oracle Java Required Files (JRF). There can be only one Oracle Common Home within each Oracle Middleware Home.
The Oracle Middleware Home directory is commonly referred to as MW_HOME.
Note:To install Oracle Identity Management components in an existing Oracle WebLogic Server administration domain, each Oracle Middleware Home directory in the domain must have identical directory paths and names.
Enter a name for the component's Oracle Home directory. The Installer uses the name you enter in this field to create the Oracle Home directory under the location you enter in the Oracle Middleware Home Location field. The Installer installs the files (such as binaries and libraries) required to host the component in the Oracle Home directory.
The Oracle Home directory is commonly referred to as ORACLE_HOME.
Note:To install Oracle Identity Management components in an existing Oracle WebLogic Server administration domain, each Oracle Home directory in the domain must have identical directory paths and names.
Enter the path to your Oracle WebLogic Server Home directory. This directory contains the files required to host the Oracle WebLogic Server. It is commonly referred to as WL_HOME.
Note:To install Oracle Identity Management components in an existing Oracle WebLogic Server administration domain, each Oracle WebLogic Server Home directory in the domain must have identical directory paths and names.
Enter the path to the location where you want to create the Oracle Instance directory. The Installer creates the Oracle Instance directory using the location you enter in this field and using the name you enter in the Oracle Instance Name field. Do not enter a path to an existing directory that contains files—if you enter a path to an existing directory, that directory must be empty.
The Installer installs the component's configuration files and runtime components in the Oracle Instance directory. Runtime components will write only to this directory. You can identify any location on your system for the Oracle Instance directory—it does not have to reside inside the Oracle Middleware Home directory.
Enter a name for the Oracle Instance directory. The Installer uses the name you enter in this field to create the Oracle Instance directory at the location you specify in the Oracle Instance Location field. This directory is commonly referred to as ORACLE_INSTANCE.
Instance names are important because Oracle Fusion Middleware uses them to uniquely identify instances. If you install multiple Oracle Fusion Middleware instances on the same computer, for example, an Oracle Identity Management instance and an Oracle WebLogic Server instance, you must give them different names.
The name you enter for the Oracle Instance directory must:
Contain only alphanumeric and underscore (_) characters
Begin with an alphabetic character (a-z or A-Z)
Consist of 4-30 characters
Not contain the hostname or IP address of the computer
Note:You cannot change the Oracle Instance name after installation.
If you want to install an Oracle Identity Management 11g Release 1 (11.1.1) component against an existing Oracle Identity Management 11g Release 1 (11.1.1) component, you may need to identify the ports for the existing component. For example, if you want to install Oracle Directory Integration Platform 11g Release 1 (11.1.1) against an existing Oracle Internet Directory 11g Release 1 (11.1.1) component, you must identify its port when you install Oracle Directory Integration Platform.
You can get information about ports using the following:
WebLogic Server Administration Console.
Log in to the Administration Console. Click on Servers under Environment to see what ports are in use for the Administration Server and Managed Servers.
Note:If you change a component's port number after installation, the ports.prop file is not updated.
/bin/opmnctl status -l command to see port numbers of components managed by OPMN.
This topic explains the steps that are common to completing most Oracle Identity Management installations and configurations. It begins with the steps on the Installation Summary screen and ends after the Installation Complete screen.
When the Installation Summary screen appears, perform the following steps to complete the installation:
Verify the installation and configuration information on the Installation Summary screen.
Click Save to save the installation response file, which contains your responses to the Installer prompts and fields. You can use this response file to perform silent installations. Refer to Appendix C, "Performing Silent Installations" for more information.
Note:The installation response file is not saved by default—you must click Save to retain it.
Click Install. The Installation Progress screen appears.
Monitor the progress of your installation. The location of the installation log file is listed for reference. After the installation progress reaches 100%, the Configuration Progress screen appears.
Note:On Unix systems, after the installation progress reaches 100%, a confirmation dialog box appears with information about the oracleRoot.sh script. Execute the script in different terminal as described in "Executing the oracleRoot.sh Script on UNIX Platforms" and continue to the Configuration Progress screen.
Monitor the progress of the configuration. The location of the configuration log file is listed for reference. After the configuration progress reaches 100%, the Installation Complete screen appears.
By default the installation summary file, which can help you get started with administration, is saved to the OUI_INVENTORY/logs/ directory. The filename is of the form: installSummaryDATE.txt. This file contains information about the configuration, such as locations of install directories and URLs for management components.
If desired, you can click the Save button on the Installation Complete screen and choose a different name and location for the file.
Click Finish to close and exit the Installer.
After installing Oracle Identity Management 11g Release 1 (11.1.1), if you want to configure the minimum (lowest) level of maximum heap size (-Xmx) required for Oracle WebLogic Server to host Oracle Identity Management components, perform the steps in this section.
Note:This is an optional step, typically performed only for test, development, or demonstration environments.
The minimum (lowest) levels for maximum heap size are:
Oracle WebLogic Administration Server: 512 MB
Oracle WebLogic Managed Server: 256 MB
Perform the following steps to configure the heap size for Oracle WebLogic Administration Servers and Oracle WebLogic Managed Servers:
Open the setDomainEnv script (.sh or .bat) in the MW_HOME/user_projects/domains/DOMAIN_NAME/bin/ directory.
Locate the last occurrence of the
In the last occurrence of the
EXTRA_JAVA_PROPERTIES entry, locate the last occurrence of heap size parameters:
-Xms, and so on.
Note:These are the heap size parameters for the Oracle WebLogic Administration Server.
Set the heap size parameters (
-Xmx) for the Oracle WebLogic Administration Server as desired, for example:
To set the heap size parameters for the Oracle WebLogic Managed Server, enter the text in Example 4-1 immediately below the last occurrence of the
EXTRA_JAVA_PROPERTIES entry and:
Set the heap size parameters (
-Xmx) as desired, for example:
wls_ods1 with the name of the Oracle WebLogic Managed Server hosting Oracle Directory Services Manager.
wls_oif1 with the name the Oracle WebLogic Managed Server hosting Oracle Identity Federation.
Save and close the setDomainEnv script.
Restart the Oracle WebLogic Administration Server and the Oracle WebLogic Managed Server by referring to Appendix B, "Starting or Stopping the Oracle Stack."
Note:On UNIX systems, if you execute the
ps -efcommand and
AdminServeror the name of the Oracle WebLogic Managed Server (for example,
ps -ef | grep AdminServeror
ps -ef | grep wls_oif1), the output contains multiple occurrences of heap size parameters (-Xmx and -Xms).
Be aware that the last occurrence of the heap size parameters in the output are effective and have precedence over the preceding occurrences.
The Installer writes log files to the ORACLE_INVENTORY_LOCATION/logs directory on UNIX systems and to the ORACLE_INVENTORY_LOCATION\logs directory on Windows systems.
On UNIX systems, if you do not know the location of your Oracle Inventory directory, you can find it in the ORACLE_HOME/oraInst.loc file.
On Microsoft Windows systems, the default location for the inventory directory is C:\Program Files\Oracle\Inventory\logs.
The following install log files are written to the log directory: