Skip navigation.

CMDTUX Messages 4200-4299

  Previous Next

4206

WARN: The -L option is obsolete. Logging will go to the userlog

Description

In release 6.1 and earlier, the -L option specified the log file for the tlisten process. In later releases, all logging goes to the userlog and this option is ignored.

Action

No action required.

See Also

tlisten(1)

4207

ERROR: Could not become a background process

Description

Normally, the tlisten process starts as a background program automatically. The program could not be restarted in the background and will not run.

Action

Check for other messages in the event log. Determine if there is an OS resource that is exhausted and re-try the command when it is resolved.

See Also

tlisten(1)

4208

WARN: The -L option is obsolete

Description

In release 6.1 and earlier, the -L option specified the log file for the tlisten process. In later releases, all logging goes to the userlog and this option is ignored.

Action

No action required.

See Also

tlisten(1)

4209

INFO: Accepted request from fd, seq # number

Description

The tlisten process will log the fact that it was able to accept a new connection, after successfully establishing a listening endpoint and opening an accept endpoint on the network. The listening endpoint connection descriptor, fd, and sequence number, number, are placed in the event log.

Action

No action required.

See Also

tlisten (1)

4215

INFO: SRVID=srvid SRVGRP=grpname SIGTERM sent

Description

A SIGTERM signal was sent to a server in response to a "tmshutdown -w" command or a TMIB request to set the server state to "DEAd".

Action

No action required.

See Also

tmshutdown (1), TM_MIB(5)

4217

INFO: SRVID=srvid SRVGRP=grpname SIGKILL sent

Description

A SIGKILL signal was sent to a server in response to a "tmshutdown -w" command or a TMIB request to set the server state to "DEAd".

Action

No action required.

See Also

tmshutdown (1), TM_MIB(5)

4218

ERROR: Cannot send message to tlisten

Description

While trying to propagate the TUXCONFIG to a non-master machine, a failure occurred in contacting the tlisten program.

Action

Check for other messages in either the local or remote event log.

See Also

tlisten(1), TM_MIB(5)

4219

ERROR: Cannot send message to tlisten

Description

While trying to propagate the TUXCONFIG to a non-master machine, a failure occurred in contacting the tlisten program.

Action

Check for other messages in either the local or remote event log.

See Also

tlisten(1), TM_MIB(5)

4221

ERROR: Cannot become a client - tpinit() failed - errmsg

Description

The administrative client sbbl could not join the application

Action

There may be too many people attempting to perform MIB operations at the same time. Only 9 sbbl servers may be run at a time, so that if there are more than 9 MIB operations which occur simultaneously, this message may appear. Limit the number of concurrent MIB operations.

4222

ERROR: Memory allocation failure

Description

The system ran out of memory in the sbbl process

Action

Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

4223

ERROR: Cannot open file

Description

The sbbl process has attempted to open its input file and failed

Action

If the host operating system has a limit on the number of open files, or the number of open files per user or the number of open files per process, then you may need to increase that limit. If it seems that there should be enough file descriptors for this operation, contact your BEA TUXEDO system Technical Support.

4224

ERROR: Cannot read from file

Description

The sbbl process has attempted to read its input file and failed

Action

Contact your BEA TUXEDO system Technical Support.

4225

ERROR: Cannot open file

Description

While attempting to boot, the MIB has attempted to open a temporary output file and failed.

Action

If the host operating system has a limit on the number of open files, or the number of open files per user or the number of open files per process, then you may need to increase that limit. The file system /tmp may be full. The directory where temporary files are placed may be full. If it seems that there should be enough file descriptors and disk space for this operation, contact your BEA TUXEDO system Technical Support.

4226

ERROR: Cannot write to file

Description

During a boot sequence, the MIB has attempted to write to its output file and failed.

Action

The file system /tmp may be full. The directory where temporary files are placed may be full. If it seems that there should be enough disk space for this operation, contact your BEA TUXEDO system Technical Support.

4227

ERROR: Cannot open file

Description

While attempting to shutdown, the MIB has attempted to open a temporary output file and failed.

Action

If the host operating system has a limit on the number of open files, or the number of open files per user or the number of open files per process, then you may need to increase that limit. The file system /tmp may be full. The directory where temporary files are placed may be full. If it seems that there should be enough file descriptors and disk space for this operation, contact your BEA TUXEDO system Technical Support.

4228

ERROR: Cannot write to file

Description

During a shutdown sequence, the MIB has attempted to write to its output file and failed

Action

The file system /tmp may be full. The directory where temporary files are placed may be full. If it seems that there should be enough disk space for this operation, contact your BEA TUXEDO system Technical Support.

4229

ERROR: Cannot allocate memory for tmconfig class attribute table

Description

Memory allocation failed while retrieving MIB attributes.

Action

Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

4230

ERROR: tpcall() returned no configured class attribute for section fieldid

Description

While retrieving MIB attribute information, a failure occurred, so the tmconfig operation will fail.

Action

Check the log for related messages.

4231

ERROR: tpcall() returned no class attribute entry for section fieldid

Description

While retrieving MIB attribute information, a failure occurred, so the tmconfig operation will fail.

Action

Check the log for related messages.

4232

ERROR: Memory allocation failure

Description

While the sbbl process was attempting to shut down a process, the system ran out of memory.

Action

Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

4233

ERROR: Memory allocation failure

Description

While the sbbl process was attempting to shut down a process, the system ran out of memory.

Action

Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

4234

ERROR: Failed to get information on the Deactivated Object

Description

A failure occurred while the MIB was attempting to retrieve information about an object that was going to be deactivated.

Action

Contact your BEA TUXEDO system Technical Support.

4235

ERROR: Memory allocation failure

Description

While the sbbl process was attempting to start a process, the system ran out of memory.

Action

Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

4236

ERROR: Failed to get information on the Activated Object

Description

A failure occurred while the MIB was attempting to retrieve information about an object that was going to be activated.

Action

Contact your BEA TUXEDO system Technical Support.

4237

ERROR: Memory allocation error for TAGENT on site

Description

While attempting to generate an encryption packet for the TAGENT on the given site, a memory allocation error occurred.

Action

Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

4238

ERROR: No encryption package installed. num bits minimum encryption is configured

Description

A process attempted to contact the tlisten. However, the MINENCRYPTBITS field in the NETWORK section for this process was set to a value greater than 0. No encryption package is installed.

Action

Buy and install the Link Level Encryption package or reconfigure the system such that MINENCRYPTBITS is 0.

4241

ERROR: Error receiving diffie-hellman reply from TAGENT on site

Description

The link level encryption packet which contained the Diffie-Hellman key exchange information was corrupted. The network may be compromised.

Action

Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.

4242

WARN: Encryption negotiation failure with TAGENT on site

Description

The process attempting to connect to the TAGENT could not successfully negotiate an encryption strength.

Action

There are many ways to fix this problem. One is to change the encryption parameters in the NETWORK section for the connecting machine to be compatible with the options with which the remote tlisten was started. The second is to kill the remote tlisten, and restart it using different parameters for the -z and -Z options. If you do not specify any -z or -Z options to the tlisten process, then by default it will speak any encryption protocol allowed in the currently installed package. To find out which package is installed on any site, run the command tmadmin -v. If your application is connecting to an older site, then you must configure the system such that it can speak 0 bits of encryption to the older site.

4243

ERROR: Error establishing diffie-hellman key

Description

The link level encryption packet which contained the Diffie-Hellman key exchange information was corrupted. The network may be compromised.

Action

Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.

4244

WARN: Encryption negotiation failure with TAGENT on site

Description

The process attempting to connect to the TAGENT could not successfully negotiate an encryption strength.

Action

There are many ways to fix this problem. One is to change the encryption parameters in the NETWORK section for the connecting machine to be compatible with the options with which the remote tlisten was started. The second is to kill the remote tlisten, and restart it using different parameters for the -z and -Z options. If you do not specify any -z or -Z options to the tlisten process, then by default it will speak any encryption protocol allowed in the currently installed package. To find out which package is installed on any site, run the command tmadmin -v. If your application is connecting to an older site, then you must configure the system such that it can speak 0 bits of encryption to the older site.

4249

ERROR: Could not get encryption handle

Description

The system ran out of memory in the tlisten process while attempting to allocate an encryption handle.

Action

Check the memory on the system where the command was run. If it seems that there should be enough memory for this operation, contact your BEA TUXEDO system Technical Support.

4252

ERROR: -z (sub) is larger than 0, but the link level package is not installed

Description

The -z option was larger than zero. However, the link level encryption package was not installed.

Action

Buy the link level encryption package. Set the -z option to 0. If you believe that you have installed the link level encryption package, contact your BEA TUXEDO system Technical Support.

4254

ERROR: Older client attempted to connect to secure tlisten

Description

A site older than the current release attempted to contact a tlisten whose -z option was set greater than 0.

Action

When older sites are part of a BEA TUXEDO configuration, the -z option of the tlisten may have to be zero in order for proper communication between the older site and the newer site. By restarting the tlisten process with a -z option of zero (or no -z option, since by default the minimum encryption parameter is zero), then older sites may successfully connect to this tlisten process.

4255

ERROR: Could not generate first encryption packet

Description

The link level encryption packet which contained the Diffie-Hellman key exchange information was corrupted. The network may be compromised.

Action

Monitor your network for malicious use. Contact your BEA TUXEDO Technical Support.

4256

ERROR: Could not send first encryption packet

Description

An error occurred in the network when attempting to send an encryption packet.

Action

Check the network on the system where the tlisten is running. If it seems that the network is working properly, contact your BEA TUXEDO Technical Support.

4257

ERROR: Encryption negotiation failure

Description

The process attempting to connect to the tlisten could not successfully negotiate an encryption strength.

Action

There are many ways to fix this problem. One is to change the encryption parameters in the NETWORK section for the connecting machine to be compatible with the options with which the remote tlisten was started. The second is to kill the remote tlisten, and restart it using different parameters for the -z and -Z options. If you do not specify any -z or -Z options to the tlisten process, then by default it will speak any encryption protocol allowed in the currently installed package. To find out which package is installed on any site, run the command tmadmin -v. If your application is connecting to an older site, then you must configure the system such that it can speak 0 bits of encryption to the older site.

4258

ERROR: fatal error while negotiating encryption parameters

Description

The link level encryption packet which contained the Diffie-Hellman key exchange information was corrupted. The network may be compromised.

Action

Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.

4259

ERROR: Minimum encryption (num) is larger than 0, but the link level package is not installed

Description

The BRIDGE or BSBRIDGE could not boot because it was not configured correctly. The MINENCRYPTBITS field in the NETWORK section was set to a value greater than 0. No encryption package is installed.

Action

Buy and install the Link Level Encryption package or reconfigure the system such that MINENCRYPTBITS is 0.

4261

ERROR: Memory allocation failure

Description

The system ran out of memory

Action

Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

4262

ERROR: Could not create first diffie-hellman packet

Description

While generating the first link level encryption negotiation package for BRIDGE communication, an error occurred.

Action

Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.

4263

ERROR: Error sending encryption negotiation packet

Description

While sending the first link level encryption negotiation package for BRIDGE communication, an error occurred.

Action

Check the network on the machine with the affected BRIDGE or BSBRIDGE.

4265

ERROR: Memory allocation failure

Description

The system ran out of memory in the BRIDGE or BSBRIDGE

Action

Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

4266

ERROR: Could not create second diffie-hellman packet

Description

While generating the second link level encryption negotiation package for BRIDGE communication, an error occurred.

Action

Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.

4267

ERROR: Error sending encryption negotiation packet

Description

While sending the second link level encryption negotiation package for BRIDGE communication, an error occurred.

Action

Check the network on the machine with the affected BRIDGE or BSBRIDGE.

4268

ERROR: Encryption negotiation failed with bridge on site

Description

The BRIDGE or BSBRIDGE attempting to connect to the BRIDGE or BSBRIDGE on the given remote site could not successfully negotiate an encryption strength.

Action

Change the encryption parameters in the NETWORK section for the two machines connecting to each other to be compatible.

4269

ERROR: System error during negotiation with bridge on site

Description

A system error occurred during link level encryption negotiation.

Action

Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.

4271

ERROR: System error during negotiation with bridge on site

Description

A system error occurred during link level encryption negotiation.

Action

Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.

4272

ERROR: Could not agree on encryption strength

Description

A system error occurred during link level encryption negotiation.

Action

Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.

4274

ERROR: Could not send saved messages to site

Description

While the BRIDGE or BSBRIDGE is negotiating the link level encryption parameters, messages to the remote BRIDGE are saved. An error occurred while sending these saved messages to the remote BRIDGE after the negotiation was complete.

Action

Check the network on the machine with the affected BRIDGE or BSBRIDGE.

4275

ERROR: Cannot start servers, error reading *SERVERS section

Description

During the tmboot process, the SERVERS section of the configuration file could not be read.

Action

Verify that the environment variable TUXCONFIG is set correctly and exported. Make sure the TUXCONFIG file is not corrupted (try a tmunloadcf). Verify that the TUXCONFIG file was propagated to all machines in the configuration.

See Also

tmboot (1), tmunloadcf (1)

4276

ERROR: Can't shutdown servers, error reading *SERVERS section

Description

During the tmshutdown process, the SERVERS section of the configuration file could not be read.

Action

Verify that the environment variable TUXCONFIG is set correctly and exported, or that TUXCONFIG is not corrupted (try a tmunloadcf)

4277

ERROR: Remote BBL boot failed. Try running pclean before booting

Description

A remote machine has been marked as partitioned, but has not been cleaned from the bulletin board using the tmadmin pclean command (or the equivalent MIB operation).

Action

First pclean the remote machine by using tmadmin (or the GUI, or the MIB). Once the pclean has completed successfully, try to boot the remote BBL again. If the remote boot fails again, contact your BEA TUXEDO system Technical Support.

4279

ERROR: Error detected during mutual authentication

Description

The tlisten could not access the authentication files.

Action

Make sure that the administrator has read privileges on the $TUXDIR/udataobj/tlisten.pw file or the $APPDIR/.adm/tlisten.pw file. Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.

4280

ERROR: Error detected during mutual authentication with val

Description

The remote tlisten could not access the authentication files.

Action

Make sure that the administrator has read privileges on the $TUXDIR/udataobj/tlisten.pw file or the $APPDIR/.adm/tlisten.pw file on the remote site. Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.

4281

ERROR: Cannot read password file "file" (errno=val)

Description

While authenticating with the tlisten process, an error occurred while reading the password file

Action

The password file is $TUXDIR/udataobj/tlisten.pw or $APPDIR/.adm/tlisten.pw. Make sure that this file is not corrupted or missing. If everything in the file appears normal, contact your BEA TUXEDO system Technical Support.

4282

ERROR: Failed to change working directory to "dir" (errno = val)

Description

The tlisten process may attempt to change directories to $APPDIR during authentication. If the process cannot change directories, this error may occur.

Action

Make sure that the APPDIR of the current application is not corrupted or missing. If everything in the directory appears normal, contact your BEA TUXEDO system Technical Support.

4283

ERROR: Failed to determine file length for "dir" (errno = val)

Description

While authenticating with the tlisten process, an error occurred while reading the password file.

Action

The password file is $TUXDIR/udataobj/tlisten.pw or $APPDIR/.adm/tlisten.pw. Make sure that this file is not corrupted or missing. If everything in the file appears normal, contact your BEA TUXEDO system Technical Support.

4284

ERROR: Authentication requested, but no password file exists

Description

While authenticating with the tlisten process, an error occurred while reading the password file.

Action

The password file is $TUXDIR/udataobj/tlisten.pw or $APPDIR/.adm/tlisten.pw. Make sure that this file is not corrupted or missing. If everything in the file appears normal, contact your BEA TUXEDO system Technical Support.

4285

WARN: T L I S T E N A U T H E N T I C A T I O N I S D I S A B L E D !

Description

tlisten authentication has been turned off. No site will be authenticated. Be warned that the tlisten may be the site of a security breach.

Action

The password file is $TUXDIR/udataobj/tlisten.pw or $APPDIR/.adm/tlisten.pw. The password file is a plain-text file where each line (up to 20) contains a password. The password file on the remote site must contain at least one password which is the same as a password on the local site. If you create this file, and restart the tlisten or other process which may have to speak to the tlisten, then this warning will not be displayed. If this warning is not displayed, then the network session with the remote site will be authenticated.

4286

ERROR: Password file "file" exists, encryption is not available

Description

In order to properly authenticate the tlisten session, an encryption package must be installed.

Action

Contact your BEA TUXEDO system Technical Support.

4287

ERROR: Failed to open password file "file" (errno = val)

Description

The system found the tlisten authentication password file, but could not open it.

Action

If the host operating system has a limit on the number of open files, or the number of open files per user or the number of open files per process, then you may need to increase that limit. If it seems that there should be enough file descriptors for this operation, contact your BEA TUXEDO system Technical Support.

4288

WARN: More than val passwords found in file

Description

The tlisten authentication file will only accept the first twenty passwords. All subsequent passwords will be ignored.

Action

Limit the number of passwords in the tlisten password authentication file to twenty.

4289

WARN: Password #val is greater than val chars

Description

Passwords found in the tlisten authentication file can only be the specified number of characters long. All characters after the maximum number of characters will be ignored.

Action

Limit the number of characters for each password in the tlisten password authentication file to the specified amount.

4290

ERROR: No passwords in password file

Description

There must be at least one password in the password authentication file in order for tlisten authentication to work properly.

Action

The password file is $TUXDIR/udataobj/tlisten.pw or $APPDIR/.adm/tlisten.pw. Add a password to the password file. One suggestion for a password is abracadabra.

4291

ERROR: S E C U R I T Y V I O L A T I O N ! Remote site may be compromised.

Description

The remote site did not have a matching password in its password file.

Action

Make sure that there is a password on the local site which matches one of the passwords on the remote site. Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.

4292

ERROR: Transport failure during authentication

Description

The network returned an error during authentication with the tlisten.

Action

Check the network on the system where the command was run. If the network is OK, contact your BEA TUXEDO system Technical Support.

4293

ERROR: Failed to authenticate with remote process (tperrno=val)

Description

Authentication with the remote tlisten failed.

Action

Make sure that there is a password on the local site that matches one of the passwords on the remote site. Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.

4294

ERROR: Invalid protocol message received during authentication

Description

Authentication with the remote tlisten failed.

Action

Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.

4295

ERROR: Invalid protocol message received during authentication

Description

Authentication with the remote tlisten failed.

Action

Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.

 

Skip footer navigation  Back to Top Previous Next