CMDTUX Messages 4600-4699
|
|
4600
ERROR:JDBCCONNPOOLS entry "val" refers to non-existent server - SRVGRP:val SRVID:val
Description
The connection pool (val) refers to a server which does not exist in the SERVERS section.
Action
Edit the UBBCONFIG file to make sure that the connection pool refers to a server which exists in the SERVERS section. Make sure that the SRVGRP and SRVID are correct if it allready exists.
4601
ERROR:Duplicate entries in JDBCCONNPOOLS Section "val"
Description
There are multiple JDBCCONNPOOLS sections defined in the UBBCONFIG file.
Action
Remove the extraneous JDBCCONNPOOLS section from the UBBCONFIG file.
See Also
ubbconfig(5)
4602
ERROR:Driver spec must be <= val characters in length
Description
The DRIVER value of the JDBCCONNPOOLS entry of the configuration file must be <= 256 characters.
Action
Specify a value that is less than or equal to 256 characters.
See Also
tmloadcf(1), ubbconfig(5)
4603
ERROR:URL spec must be <= val characters in length
Description
The URL value of the JDBCCONNPOOLS entry of the configuration file must be <= 256 characters.
Action
Specify a value that is less than or equal to 256 characters.
See Also
tmloadcf(1), ubbconfig(5)
4604
ERROR:DBNAME must be <= val characters in length
Description
The DBNAME value of the JDBCCONNPOOLS entry of the configuration file must be <= 256 characters.
Action
Specify a value that is less than or equal to 256 characters.
See Also
tmloadcf(1), ubbconfig(5)
4605
ERROR:DBUSER must be <= val characters in length
Description
The DBUSER value of the JDBCCONNPOOLS entry of the configuration file must be <= 30 characters.
Action
Specify a value that is less than or equal to 30 characters.
See Also
tmloadcf(1), ubbconfig(5)
4606
ERROR:DBPASSWORD must be <= val characters in length
Description
The DBPASSWORD value of the JDBCCONNPOOLS entry of the configuration file must be <= 64 characters.
Action
Specify a value that is less than or equal to 64 characters.
See Also
tmloadcf(1), ubbconfig(5)
4607
ERROR:USERROLE must be <= val characters in length
Description
The USERROLE value of the JDBCCONNPOOLS entry of the configuration file must be <= 30 characters.
Action
Specify a value that is less than or equal to 30 characters.
See Also
tmloadcf(1), ubbconfig(5)
4608
ERROR:DBHOST must be <= val characters in length
Description
The DBHOST value of the JDBCCONNPOOLS entry of the configuration file must be <= 30 characters.
Action
Specify a value that is less than or equal to 30 characters.
See Also
tmloadcf(1), ubbconfig(5)
4609
ERROR:DBNETPROTOCOL must be <= val characters in length
Description
The DBNETPROTOCOL value of the JDBCCONNPOOLS entry of the configuration file must be <= 30 characters.
Action
Specify a value that is less than or equal to 30 characters.
See Also
tmloadcf(1), ubbconfig(5)
4610
ERROR: DBPORT parameter must be > 0 and < 65536
Description
The DBPORT parameter in the JDBCCONNPOOLS entry of the configuration file must be within the proper range of values.
Action
Specify a value that is greater than 0 and less than 65536.
See Also
tmloadcf(1), ubbconfig(5)
4611
ERROR:PROPS must be <= val characters in length
Description
The PROPS value of the JDBCCONNPOOLS entry of the configuration file must be <= 256 characters.
Action
Specify a value that is less than or equal to 256 characters.
See Also
tmloadcf(1), ubbconfig(5)
4612
ERROR: LOGINDELAY parameter must be >= 0
Description
The LOGINDELAY parameter in the JDBCCONNPOOLS entry of the configuration file must be within the proper range of values.
Action
Specify a value that is greater than 0.
See Also
tmloadcf(1), ubbconfig(5)
4613
ERROR: INITCAPACITY parameter must be > 0
Description
The INITCAPACITY parameter in the JDBCCONNPOOLS entry of the configuration file must be within the proper range of values.
Action
Specify a value that is greater than 0.
See Also
tmloadcf(1), ubbconfig(5)
4614
ERROR: MAXCAPACITY parameter must be > 0
Description
The MAXCAPACITY parameter in the JDBCCONNPOOLS entry of the configuration file must be within the proper range of values.
Action
Specify a value that is greater than 0.
See Also
tmloadcf(1), ubbconfig(5)
4615
ERROR: CAPACITYINCR parameter must be > 0
Description
The CAPACITYINCR parameter in the JDBCCONNPOOLS entry of the configuration file must be within the proper range of values.
Action
Specify a value that is greater than 0.
See Also
tmloadcf(1), ubbconfig(5)
4616
ERROR: SHRINKPERIOD parameter must be > 0
Description
The SHRINKPERIOD parameter in the JDBCCONNPOOLS entry of the configuration file must be within the proper range of values.
Action
Specify a value that is greater than 0.
See Also
tmloadcf(1), ubbconfig(5)
4617
ERROR:TESTTABLE must be <= val characters in length
Description
The TESTTABLE value of the JDBCCONNPOOLS entry of the configuration file must be <= 256 characters.
Action
Specify a value that is less than or equal to 256 characters.
See Also
tmloadcf(1), ubbconfig(5)
4618
ERROR: REFRESH parameter must be > 0
Description
The REFRESH parameter in the JDBCCONNPOOLS entry of the configuration file must be within the proper range of values.
Action
Specify a value that is greater than 0.
See Also
tmloadcf(1), ubbconfig(5)
4619
ERROR: WAITTIMEOUT parameter must be > 0
Description
The WAITTIMEOUT parameter in the JDBCCONNPOOLS entry of the configuration file must be within the proper range of values.
Action
Specify a value that is greater than 0.
See Also
tmloadcf(1), ubbconfig(5)
4620
ERROR:MAXCAPACITY parameter missing in *JDBCCONNPOOLS entry - val
Description
Each entry in the JDBCCONNPOOLS section of the configuration
file must have a MAXCAPACITY parameter.
Action
Specify a MAXCAPACITY value for the entry.
See Also
tmloadcf(1), ubbconfig(5)
4621
ERROR:CAPACITYINCR parameter missing in *JDBCCONNPOOLS entry - val
Description
Each entry in the JDBCCONNPOOLS section of the configuration
file must have a CAPACITYINCR parameter.
Action
Specify a CAPACITYINCR value for the entry.
See Also
tmloadcf(1), ubbconfig(5)
4622
ERROR:INITCAPACITY exceeds MAXCAPACITY in *JDBCCONNPOOLS entry - val
Description
A JDBCCONNPOOLS entry was read where the
INITCAPACITY parameter was greater than the
MAXCAPACITY parameter.
Action
Correct the entry and re-load the configuration.
See Also
tmloadcf(1), ubbconfig(5)
4623
ERROR: TESTTABLE is mandatory in *JDBCCONNPOOLS entry val
Description
An entry in the JDBCCONNPOOLS section of the configuration
file has a value for
REFRESH, TESTONRESERVE, or
TESTONRELEASE but not for TESTTABLE.
Action
Specify a TESTTABLE value for the entry.
See Also
tmloadcf(1), ubbconfig(5)
4624
ERROR:JDBCCONNPOOLS entry "val" refers to a non JAVA server - SRVGRP:srvgrp SRVID:srvid
Description
A JDBCCONNPOOLS entry refers to a server
(group srvgrp and ID srvid) that is not
a JAVA server.
Action
Specify a valid server for the JDBCCONNPOOLS entry.
See Also
tmloadcf(1), ubbconfig(5)
4628
ERROR: Encryption error for OPENINFO password in group val
Description
tmloadcf encountered an internal error while encrypting password provided in OPENINFO attribute.
Action
Please contact BEA Customer Support.
4629
ERROR: Encryption error for PROPS password in group val, server val, pool val
Description
tmloadcf encountered an internal error while encrypting password provided in PROPS attribute.
Action
Please contact BEA Customer Support.
4630
ERROR: Encryption error for DBPASSWORD in group val, server val, pool val
Description
tmloadcf encountered an internal error while encrypting password provided in DBPASSWORD attribute.
Action
Please contact BEA Customer Support.
4631
ERROR:JDBCCONNPOOLS entry "val" cannot have both WAITFORCONN and WAITTIMEOUT
Description
A JDBCCONNPOOLS entry was read that has both
WAITFORCONN and WAITFORTIMEOUT parameters specified.
These parameters are mutually exclusive.
Action
Correct the entry and re-load the configuration.
See Also
tmloadcf(1), ubbconfig(5)
4632
ERROR:Non encrypted part of PROPS attribute must be <= val characters in length
Description
The non-encrypted part of the PROPS value
of the JDBCCONNPOOLS entry of the configuration
file must be <= 200 characters.
Action
Specify a value that is less than or equal to 200 characters.
See Also
tmloadcf(1), ubbconfig(5)
4633
ERROR:Non encrypted part of OPENINFO attribute must be <= val characters in length
Description
The non-encrypted part of the OPENINFO value of
the GROUPS section of the configuration file
must be <= 200 characters.
Action
Specify a value that is less than or equal to 200 characters.
See Also
tmloadcf(1), ubbconfig(5)
4634
ERROR: Module Path "val" is not unique in server entry.
Description
The module path, val, is not unique within the SERVERS entry where it is specified.
Action
Correct the entry and re-load the configuration.
See Also
tmloadcf(1), ubbconfig(5)
4640
ERROR: Group name must be <= val characters in length
Description
The SRVGRP value of a JDBCCONNPOOLS entry in the configuration file must be <= 30 characters.
Action
Specify a value that is less than or equal to 30 characters.
See Also
tmloadcf(1), ubbconfig(5)
4643
ERROR: buildserver cannot open the temporary output file, srcfile.
Description
The buildserver cannot open the temporary output file, srcfile.
Action
Check that the directory for the file exists and has write permissions, and that the file system has sufficient resources for a new file.
See Also
buildserver(1)
4644
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4645
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4646
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4647
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4648
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4649
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4675
ERROR: Module Path "val" is not unique in server entry.
Description
The module path, val, is not unique within the SERVERS entry where it is specified.
Action
Correct the entry and re-load the configuration.
See Also
tmloadcf(1), ubbconfig(5)
4676
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4677
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4678
ERROR: AUTOTRAN specified for EJB Interface interface_name
Description
An entry for interface interface_name in the INTERFACES section of the UBBCONFIG file has the AUTOTRAN parameter set to Y but it is an EJB interface ("EJB:").
Action
Either set the AUTOTRAN parameter to N or associate the a non-EJB interface.
See Also
tmloadcf(1), ubbconfig(5)
4679
ERROR: Re-encryption error for OPENINFO password in group val
Description
OPENINFO was found encrypted in the UBBCONFIG file during tmloadcf,
but an attempt to decrypt it with an old key failed.
Action
Replace the encrypted part of OPENINFO with the "*****" string, and run tmloadcf again
4680
ERROR: Re-encryption error for PROPS password in group val, server val, pool val
Description
PROPS was found encrypted in the UBBCONFIG file during tmloadcf,
but an attempt to decrypt it with an old key failed.
Action
Replace the encrypted part of PROPS with the "*****" string, and run tmloadcf again
4681
ERROR: Re-encryption error for DBPASSWORD password in group val, server val, pool val
Description
DBPASSWORD was found encrypted in the UBBCONFIG file during tmloadcf,
but an attempt to decrypt it with an old key failed
Action
Replace the encrypted part of DBPASSWORD with the "*****" string, and run tmloadcf again
 |
 |
 |