CMDTUX Messages 6900-6999
6900
ERROR: MINENCRYPTBITS parameter must be 0, 40, 56, 128, or 256
Description
The MINENCRYPTBITS configured in the NETWORK section is not valid. The valid value must be 0, 40, 56, 128, or 256.
Action
Correct the MINENCRYPTBITS value configured in the UBBCONFIG.
See Also
ubbconfig(5)
6901
ERROR: MAXENCRYPTBITS parameter must be 0, 40, 56, 128, or 256
Description
The MINENCRYPTBITS configured in the NETWORK section is not valid. The valid value must be 0, 40, 56, 128, or 256.
Action
Correct the MAXENCRYPTBITS value configured in the UBBCONFIG.
See Also
ubbconfig(5)
6902
Invalid value
Description
An invalid or out of range value for SSL RENEGOTIATION is configured.
Action
Use the correct value for SSL RENEGOTIATION.
6903
ERROR: SSL_RENEGOTIATION parameter must be >= 0 and <= 2147483647
Description
The configured SSL_RENEGOTIATION value is not valid. The valid value must be greater or equal to 0, and less tn han or equal to 2147483647.
Action
Use the legal value for SSL_RENEGOTIATION in the UBBCONFIG.
6904
ERROR: -z(val) must be 0, 40, 56, 128, or 256
Description
The '-z' command line option for tlisten is for MINENCRYPTBITS, and its value must be 0, 40, 56, 128, or 256. The 'tlisten
' process -z option is not valid.
Action
Use the supported '-z' command line options value.
6905
ERROR: -Z(val) must be 0, 40, 56, 128, or 256
Description
The '-Z' command line option for tlisten is for MAXENCRYPTBITS, and its legal values are 0, 40, 56, 128, or 256 bits. The 'tlisten
' process -Z is value is not valid.
Action
Use the supported '-Z' command line options value.
6906
ERROR: -s option cannot be specified without -c option
Description
The -s option indicates '
Action
Specify -s, -n, and -c option all together.
See Also
6907
ERROR: -c option cannot be specified without -s option
Description
The '-c' option is for private key location. It can only be used when 'tlisten
' is running with SSL.
Action
Correct the command line option to tell tlisten
to run with SSL, or remove '-c' option.
6908
usage: tlisten -l nlsaddr [-d dev] [ -u {uid-# | uid-name}] [-z {0|40|56|128|256}] [-Z {0|40|56|128|256}] [-s] [-n sec_principal_name] [-c sec_principal_location] [-p sec_principal_passvar]
Description
This is the command line usage information for 'tlisten
'.
Action
Informational, no action required.
6909
WARN: -c sec_principal_location cannot b specified without -n sec_principal_name; ignoring -c option
Description
The -c option is given without -n option. The principal's private key location option has to be combined with sec_principal_name to be valid. This private key location value will be ignored.
Action
No action required if not running with SSL; however, if SSL is required then '-n' option for security principal name also has to be given.
6910
WARN: -p sec_principal_passvar cannot be specified without -n sec_principal_name; ignoring -p option
Description
The password for private key option, '-p', is given without specifying the principal name. It is ignored.
Action
No action required if not running with SSL; however, if SSL is required then '-n' option for security principal name also has to be given.
6912
Enter password for usrname:
Description
Prompt to ask user to enter password for user usrname.
Action
Enter the password for the private key for user 'usrname'.
6913
ERROR: Cannot get password for usrname
Description
Can not get password from user for 'usrname' from prompt.
Action
Enter the correct password when prompted.
6914
Re-enter password for usrname
Description
Prompt for asking user to re-enter password for private key.
Action
Enter the correct password when prompted.
6915
ERROR: Cannot get password for usrname
Description
Can not get password from user for 'usrname' from prompt.
Action
Enter the correct password when prompted.
6916
WARN: The entered password do not match, Try again.
Description
The entered passwords do not matchj. The user has one more chane to correct the problem.
Action
Enter the correct password when prompted.
6917
ERROR: Too many passoword failure for usrname
Description
There are too many failure while trying to get password from user.
Action
Enter the correct password next time starting tlisten
.
6918
ERROR: Memory allocation failure
Description
An attempt to allocate memory dynamically from the operating system using malloc
failed.
Action
Make sure the operation system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also increate the space on the swap device.
See Also
See the malloc
function.
For UNIX system, see the malloc
(3) manual page.
For Microsoft Windows systems, see the Microsoft Visuall C++ online help.
6919
ERROR: Error initializing SSL certificate or private key
Description
The tlisten
proces encountered error while initilizing SSL subsystem.
Action
Check ULOG for more exact reason of failure. Then check the PKI plug-in configuration, compare it with the SSL configuration of tlisten to find out whether the error are configuration related. If problem persist, contact your Certificate Authority or BEA Customer support.
6920
ERROR: LMS Q to be initialized is NULL
Description
The LMS
process encountered error while initilizing internal queue.
Action
Contact BEA Customer Support.
6921
ERROR: LMS memory allocation failed
Description
An attempt to allocate memory dynamically from the operating system using malloc
failed.
Action
Make sure the operation system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also increate the space on the swap device.
See Also
See the malloc
function.
For UNIX system, see the malloc
(3) manual page.
For Microsoft Windows systems, see the Microsoft Visuall C++ online help.
6922
ERROR: LMS Queue lock failed
Description
An attempt to lock the mutex of LMS
internal queue failed.
Action
Check system resource tunables. If problem persists, contact BEA Customer Support with information about your environment.
6923
ERROR: Cannot create LMS server thread
Description
LMS
process failed to create the network communication thread.
Action
Check system resource tunables. If problem persists, contact BEA Customer Support.
6924
ERROR: -n option argument length is greater than maxlen
Description
The length of the tlisten -n option is greater than maxlen bytes. (The -n option is used to specify the security principal name when running tlisten using the SSL protocol.)
Action
Fix the tlisten -n option argument so that it does not exceed maxlen bytes.
6925
ERROR: -c option argument length is greater than maxlen
Description
The length of the tlisten -c option is greater than maxlen bytes. (The -c option is used to specify the security principal location when running tlisten using the SSL protocol.)
Action
Fix the tlisten -c option argument so that it does not exceed maxlen bytes.
6926
ERROR: -p option argument length is greater than maxlen
Description
The length of the tlisten -p option is greater than maxlen bytes. (The -p option is used to specify the security principal password variable when running tlisten using the SSL protocol.)
Action
Fix the tlisten -p option argument so that it does not exceed maxlen bytes.
6927
ERROR: Invalid tlisten option option
Description
The tlisten command was invoked with an invalid option option.
Action
Refer to the Usage message printed after this message or to the tlisten(1) manual page for a list of valid tlisten options. Fix the tlisten command line so that only valid options are specified.
6928
ERROR: Memory allocation failed for XML buffer
Description
LMS
process failed to allocation memory for XML buffer.
Action
Make sure the operation system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also increate the space on the swap device.
See Also
See the malloc
function.
For UNIX system, see the malloc
(3) manual page.
For Microsoft Windows systems, see the Microsoft Visuall C++ online help.
6929
ERROR: Memory allocation failed for reply message to console
Description
LMS
process failed to allocation memory for reply message to TSAM Manager.
Action
Make sure the operation system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also increate the space on the swap device.
See Also
See the malloc
function.
For UNIX system, see the malloc
(3) manual page.
For Microsoft Windows systems, see the Microsoft Visuall C++ online help.
6930
ERROR: Memory allocation failed for tppost event buffer
Description
LMS
process failed to allocation memory for event buffer which to be passed to tppost.
Make sure the operation system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also increate the space on the swap device.
See Also
See the malloc
function.
For UNIX system, see the malloc
(3) manual page.
For Microsoft Windows systems, see the Microsoft Visuall C++ online help.
6931
ERROR :LMS failed to create a new connection for console
Description
LMS
process failed to create connection channel.
Action
Contact BEA Customer Support.
6932
ERROR :LMS failed to connect to TSAM Manager URL
Description
LMS
process failed to connect to TSAM Manager URL.
Action
Make sure TSAM Manager is started and runs normally. If firewall is deployed between LMS
and TSAM Manager, make sure the LMS is allowed to issue connection to TSAM Manager on the firewall configuration. If problem persist, contact BEA Customer Support.
6933
ERROR: LMS failed to send data to TSAM Manager URL
Description
LMS
process failed to send data to TSAM Manager URL.
Action
Make sure TSAM Manager is started and runs normally. If problem persist, contact BEA Customer Support.
6940
WARN: LMS server is currently unavailable
Description
Cannot send request to LMS
.
Action
Make sure LMS is configured in UBBCONFIG on local machine. If LMS is configured, check your monitoring policyto reduce the monitoring frequency.If problem persist, contact BEA Customer Support.
6942
ERROR: machine machine doesn't suppport TSAM
Description
LMS fail to do the TMMONITOR MIB request.
Action
None
6960
INFO: JVM Options[index]=value
Description
Display used JVM options in sequence.
Action
None.
6961
INFO: Configuration file: <tpgauth, gaconfig.xml, gakey.dat>
Description
Display filename of GAUTHSVR configurations (specified by '-f', '-o', '-k' respectively).
Action
None.
6962
ERROR: Fails to create JVM (rc=return code)
Description
GAUTHSVR fails when tried to create JVM.
Action
Check JVM options (by enable '-v' option for GAUTHSVR) and environment setting for JVM used by GAUTHSVR. Some key environment variables are PATH (for Windows), LD_LIBRARY_PATH (Unix), etc.
6963
ERROR: Cannot load CSS (detail message=<JVM message>)
Description
GAUTHSVR fails to load CSS, an underlying component.
Action
Contact BEA Customer Support.
6964
ERROR: Cannot initialize CSS (detail message = <JVM message>)
Description
GAUTHSVR fails to initialize CSS, an underlying component.
Action
Check the filename of configurations doesn't contains invalid characters. Otherwise contact BEA Customer Support.
6965
ERROR: Incorrect CSS package (detail message = <JVM Message>)
Description
GAUTHSVR encounters problem to communicate with CSS component.
Action
Contact BEA Customer Support.
6966
ERROR: Shutdown error (detail message = <JVM Message>)
Description
GAUTHSVR fails to shutdown CSS.
Action
Contact BEA Customer Support.
6967
ERROR: Error occurred when authenticating user username (detail message = <JVM Message>)
Description
The user security information is incorrect (either username not present in LDAP server or password is wrong).
Action
None.
6968
INFO: Configuration tpgauth is new
Description
The configuration file tpgauth is new and GAUTHSVR will re-generate the other two configuration files.
Action
None.
6969
INFO: Configuration tpgauth has been modified
Description
GAUTHSVR will update the generated two configuration files since this file has been changed. Please note that value for the item which is not present in the updated configuration file remains unchanged.
Action
None.
6970
INFO: Configuration tpgauth has not changed
Description
GAUTHSVR will not update the generated configuration files since this file has not changed.
Action
None.
6971
ERROR: Invalid -t parameter, should be either 'user' or 'group'
Description
Only 'user' or 'group' is valid as the parameter for -t option.
Action
Specify either 'user' or 'group' as the parameter for -t option.
6972
INFO: Translate user file tpusr with template tpusr-template
Description
Processing prompt.
Action
None.
6973
INFO: Group file tpgrp, output file filename
Description
Processing prompt.
Action
None.
6974
ERROR: Referenced field no. in template is too large
Description
The value specified between '<%' or '<%g' and '>' to reference fields in tpusr or tpgrp is larger than 128.
Action
Correct the value in template file and try again.
6975
INFO: Translate group file tpgrp with template tpgrp-template
Description
Processing prompt.
Action
None.
6976
ERROR: Cannot open template file filename
Description
The file filename> is not available.
Action
Provide an existed filename as template.
6977
ERROR: Template file too large to load in memory
Description
There is not enough memory to load the template file.
Action
Shrink the template file size or assign more memory resource to the process.
6978
ERROR: Cannot read template file filename
Description
The file filename is not readable.
Action
Check the file permission to confirm it's readable by current user.
6979
ERROR: Template contains invalid field reference in line lineno
Description
Field reference is not in valid format. The valid format should be a positive number enclosed by '<%' or '<%g' and '>'.
Action
Correct error in template file.
6980
ERROR: Group for group id gid does not exist in group file filename
Description
There is a user belongs to a non-existing group id gid.
Action
Remove the user from tpusr or add a group into tpgrp with group id gid.
6981
WARN: User cache is full. New entries cannot be added
Description
The user security information cannot be stored in cache since it's full. It has no impact on function of GAUTHSVR.
Action
Increase user cache size to a large value (UserCacheSize in GAUTHSVR configuration file) if there are many users in the application system.
6982
INFO: Cache[%d] user name %s, appkey 0x%x, ctime %ld
Description
Display information stored in cache.
Action
None.
6983
ERROR: Configuration error (detail message = <JVM message>)
Description
GAUTHSVR encountered error when processing configuration file.
Action
Contact BEA Customer Support.
6984
ERROR: Invalid keyword value in line lineno of filename
Description
GAUTHSVR found there was an unknown keyword value in configuration file filename.
Action
Correct error in configuration file.
6985
ERROR: Invalid line lineno in content. Format should be \"keyword=value\"
Description
GAUTHSVR found configuration file error in line lineno with content content which was not in format of \"keyword=value\".
Action
Correct error in configuration file.
6986
ERROR: Error in reading encrypted password from TUXCONFIG file
Description
This error occurred during boot of TUXEDO in MP mode while sending TUXCONFIG to older site.
Action
Contact BEA Customer Support.
6987
ERROR: Error in re-encrypting password
Description
The re-encrypt of system password using DES failed during boot of TUXEDO in MP mode while sending TUXCONFIG to older site.
Action
Contact BEA Customer Support.
6988
ERROR: Error in generating one-way hash
Description
Failure encountered while generating hash value for Application Password.
Action
Contact BEA Customer Support.
6989
ERROR: MAXSERVICES parameter must be > 0 and < 1048575
Description
The configured MAXSERVICES value is not valid.
Action
User the valid MAXSERVICES value between 0 and 1048575.
6990
ERROR: Cannot boot old release site (site_name) when MAXSRCS is greater than 32766
Description
The before TUXEDO 10.0 release the MAXSERVICES is limited to 32766. When TUXEDO is running in a mixed releases MP mode environment with any of the slave node that is older than TUXEDO 10 release then MAXSERVICES is limited to 32766 for the whole TUXEDO Application domain.
Action
Either upgrade the older release node to TUXEDO 10.0 and above, or change the MAXSERVICES to value smaller than or equal to 32766.
6991
ERROR: LMS cannot initialize the serve thread context
Description
LMS
process failed to create a new Tuxedo context for the communication thread.
Action
Contact BEA Customer Support.
6992
ERROR: Invalid value of heartbeat interval
Description
An invalid "-t" option is specfied in CLOPT of LMS
.
Action
The valid heartbeat interval is an integer of [1,60]. Make sure the correct option is set with "-t" option.
6993
ERROR: Invalid value of memory cache size option
Description
An invalid "-x" option is specfied in CLOPT of LMS
.
Action
The valid memory cache size is an integer of [1001,999999]. Make sure the correct option is set with "-x" option.
6994
ERROR: The console address is not specified or invalid
Description
The "-l" option is not specified or invalid in CLOPT of LMS
.
Action
LMS
must be given the valid TSAM Manager data server address by the "-l" option in its CLOPT. The format is "hostname:port/tsam/dataserver" or "ipaddress:port/tsam/dataserver".
6995
ERROR: The network initialization failed
Description
LMS
process failed to intialize the network communication.
Action
Contact BEA Customer Support.
6996
WARN: LMS cannot update queue table entry
Description
LMS
process failed to update its queue table entry withn Bulletin Board.
Action
Contact BEA Customer Support.
6997
ERROR: Invalid value of logging error interval
Description
The "-e" option is specified with an invalid in CLOPT of LMS
.
Action
The valid logging error interval is an integer of [1,65535]. Make sure the correct option is set with "-e" option.
6998
WARN: LMS has dropped dropped number messages and sent sent number messages
Description
LMS
process will log warning messages periodically if it had dropped messages.
Action
Increase LMS
memory cache limit to a proper size with the "-x" option. If this problem persistes, it means the monitoring frequency is too aggressive so that LMS can not synchronize the performance metrics to TSAM Manager in time. Then the query on TSAM Manager console may get incomplete results. Suggest to reduce the monitoring frequency by ajusting the monitoring polices. In a heavy load environment, TSAM plug-in level event trigger is recommended.
6999
ERROR: SSL encryption is configured for this configuration, but the SSL package is not installed
Description
The SSL is configured but the SSL package is not installed with TUXEDO.
Action
Change configuration to use LLE or contact BEA Customer Support for purchaing TUXEDO SSL package.