Skip Headers
Oracle® Database Gateway Installation and Configuration Guide
11g Release 2 (11.2) for AIX 5L Based Systems (64-Bit), HP-UX Itanium, Solaris Operating System (SPARC 64-Bit), Linux x86, and Linux x86-64

Part Number E12013-04
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
View PDF

6 Installing Oracle Database Gateway for Teradata

This chapter provides information about the hardware and software requirements and the installation procedure for Oracle Database Gateway for Teradata.

To install the gateway, follow these steps:

  1. Ensure that the system meets all of the hardware and software requirements specified in "System Requirements for Oracle Database Gateway for Teradata".

  2. Run the Oracle Universal Installer.

    See "Step Through the Oracle Universal Installer" for more information about running the Oracle Universal Installer.

    Oracle Universal Installer is a menu-driven utility that guides you through the installation of the gateway by prompting you with action items. The action items and the sequence in which they appear depend on your platform.

    See Table 6-3 for a description of the installation procedure of Oracle Database Gateway for Teradata

6.1 System Requirements for Oracle Database Gateway for Teradata

This section provides information about the hardware and software requirements for the gateway. It contains the following sections:

6.1.1 Hardware Requirements

Table 6-1 lists the minimum hardware requirements for Oracle Database Gateway for Teradata.

Table 6-1 Hardware requirements for Oracle Database Gateway for Teradata

Hardware Items Required for AIX-Based System Required for HP-UX Itanium Required for Solaris Operating System (SPARC) Required for Linux x86 Required for Linux x86 64 bit

Temporary Disk Space

400 MB

400 MB

400 MB

400 MB

400 MB

Disk Space

1.5 GB

1.5 GB

750 MB

750 MB

750 MB

Physical Memory*

512 MB

512 MB

512 MB

512 MB

512 MB

Swap Space

1 GB

1 GB

1 GB

1 GB

1 GB

Processor

IBM RS/6000 AIX-Based System Processor

HP Itanium processor for hp-ux 11

Sun Solaris Operating System (SPARC) Processor

x86

x86_64


* The minimum swap space is 1 GB (or twice the size of RAM). On systems with 2 GB or more of RAM, the swap space can be between one and two times the size of RAM. On AIX systems with 1 GB or more of memory, do not increase the swap space more than 2 GB.

6.1.1.1 Checking the Hardware Requirements

To ensure that the system meets the minimum requirements, follow these steps:

  1. To determine the physical RAM size, enter one of the following commands:

    Operating System Command
    AIX # /usr/sbin/lsattr -E -l sys0 -a realmem
    HP-UX Itanium # /usr/contrib/bin/machinfo | grep -i Memory
    Solaris (SPARC) # /usr/sbin/prtconf | grep "Memory size"
    Linux x86 # grep MemTotal /proc/meminfo
    Linux x86 64 bit # grep MemTotal /proc/meminfo

    If the size of the physical RAM installed in the system is less than the required size, you must install more memory before continuing.

  2. To determine the size of the configured swap space, enter one of the following commands:

    Operating System Command
    AIX # /usr/sbin/lsps -a
    HP-UX Itanium # /usr/sbin/swapinfo -a
    Solaris (SPARC) # /usr/sbin/swap -s
    Linux x86 # grep SwapTotal /proc/meminfo
    Linux x86 64 bit # grep SwapTotal /proc/meminfo

    If necessary, see your operating system documentation for information about how to configure additional swap space.

  3. To determine the amount of disk space available in the /tmp directory enter the following commands:

    Operating System Command
    AIX # df -k /tmp
    HP-UX Itanium # bdf /tmp
    Solaris (SPARC) # df -k /tmp
    Linux x86 # df -k /tmp
    Linux x86 64 bit # df -k /tmp

  4. To determine the amount of disk space available on the system enter the following commands:

    Operating System Command
    AIX # df -k
    HP-UX Itanium # bdf
    Solaris (SPARC) # df -k
    Linux x86 # df -k
    Linux x86 64 bit # df -k

6.1.2 Software Requirements

The following section describes the minimum software requirements for Oracle Database Gateway for Teradata.

6.1.2.1 Operating System

Table 6-2 lists the minimum operating system version required for Oracle Database Gateway for Teradata. If your operating system is lower than the minimum requirements, upgrade your operating system to meet the specified levels.

Table 6-2 Operating Systems version for Oracle Database Gateway for Teradata

Operating System Version

AIX

AIX 5L version 5.3 TL9 or higher, AIX 6.1

HP-UX Itanium

HP-UX 11iv3 (11.31)

Solaris (SPARC)

Solaris 10, (Update 6 or later)

Linux x86 Red Hat

One of the following operating system versions:

  • Red Hat Enterprise Linux 4.0, (Update 7 or later)

  • Red Hat Enterprise Linux 5.0

Linux x86 64 bit Red Hat

One of the following operating system versions:

  • Red Hat Enterprise Linux 4.0, (Update 7 or later)

  • Red Hat Enterprise Linux 5.0

Oracle Enterprise Linux x86

One of the following operating system versions:

  • Oracle Enterprise Linux 4.0, (Update 7 or later)

  • Oracle Enterprise Linux 5.0

Oracle Enterprise Linux x86 64 bit

One of the following operating system versions:

  • Oracle Enterprise Linux 4.0, (Update 7 or later)

  • Oracle Enterprise Linux 5.0

Asianux Linux 32 bit

One of the following operating system versions:

  • Asianux Linux 2.0

  • Asianux Linux 3.0

Asianux Linux 64 bit

One of the following operating system versions:

  • Asianux Linux 2.0

  • Asianux Linux 3.0

SUSE Linux Enterprise Server 32 bit

SUSE Linux Enterprise Server 10.0

SUSE Linux Enterprise Server 11.0

SUSE Linux Enterprise Server 64 bit

SUSE Linux Enterprise Server 10.0

SUSE Linux Enterprise Server 11.0


6.1.2.2 Checking the Software Requirements

To ensure that the system meets the minimum requirements, follow these steps:

  • To determine which version of AIX is installed, enter the following command:

    # oslevel -r
    
  • To determine which version of HP-UX Itanium is installed, enter the following command:

    # uname -a
    
  • To determine which version of Solaris Operating System (SPARC) is installed, enter the following command:

    # uname -r
    
  • To determine which distribution and version of Linux x86 is installed, enter the following command:

    # cat /etc/issue
    
  • To determine which distribution and version of Linux x86 64 bit is installed, enter the following command:

    # cat /proc/version
    

6.1.2.3 Certified Configuration

Teradata client libraries are required on the machine where the gateway is installed. For the latest certified clients refer to the OTN Web site:

http://www.oracle.com/technology/products/gateways/pdf/certmatrix.pdf

6.2 Step Through the Oracle Universal Installer

Table 6-3 describes the installation procedure for Oracle Database Gateway for Teradata.

Table 6-3 The Oracle Universal Installer: Steps for Installing the Gateway

Screen Response

Oracle Universal Installer: Welcome

Click Next.

Oracle Universal Installer: File Locations

The Source section of the screen is where you specify the source location that the Oracle Universal Installer must use to install the Oracle Database Gateway for Teradata. You need not edit the file specification in the Path field. The default setting for this field points to the installer file on your Oracle Database Gateway installation media.

The Path field in the Destination section of the File Locations screen is where you specify the destination for your installation. You need not edit the path specification in the Path field. The default setting for this field points to ORACLE_HOME. After you set the fields in the File Locations screen as necessary, click Next to continue. After loading the necessary information from the installation media, the Oracle Universal Installer displays the Available Products screen.

Oracle Universal Installer: Available Product Components

a. Select Oracle Database Gateway for Teradata 11.2.

b. Click Next.

Oracle Database Gateway for Teradata

Teradata Database Server Host IP or Alias - Specify the host name or the IP address of the machine hosting the Teradata database server. This release supports IPv6 format.

Teradata Database Server Port number - Specify the port number of the Teradata database server

Teradata Database Name - Specify the Teradata database name

Teradata TD_ICU_DATA Path - Specify the local path where ICU data libraries are located (Typically /opt/teradata/tdicu/lib or what $TD_ICU_DATA is set to in /etc/profile).

Teradata COPLIB Path – Specify the local path were COPLIB is located (Typically /usr/lib or what $COPLIB is set to in /etc/profile).

Teradata COPERR Path – Specify the local path were COPERR is located (Typically /usr/lib or what $COPERR is set to in /etc/profile).

Click Next to continue.

Oracle Universal Installer: Summary

The Installation Summary screen enables you to review a tree list of options and components for this installation. Click Install to start installation.

Oracle Net Configuration Assistant: Welcome

Click Cancel

Oracle Net Configuration Assistant:

Click Yes

Oracle Universal Installer: Configuration Tools

Click Exit

Exit

The final screen of the Oracle Universal Installer is the End of Installation screen. Click Exit to exit the installer.