Go to main content
1/9
Contents
Title and Copyright Information
Preface
Documentation Accessibility
Conventions
1
Overview and Scope
1.1
Overview of Backup and Recovery Concepts
1.2
Scope
1.3
Supported Platforms
1.4
Backup and Recovery Recommendations
2
Backup and Recovery Locations
3
Backup and Recovery of Hardware Components
3.1
Exalogic Configuration Utility
3.2
Exalogic Compute Nodes
3.2.1
Backing Up Exalogic Compute Nodes
3.2.1.1
Backing Up the ILOM of a Compute Node
3.2.1.2
Backing Up the Operating System of a Compute Node
3.2.2
Reimaging and Bare Metal Restore
3.2.3
Recovering Exalogic Compute Nodes in a Virtual Environment
3.3
InfiniBand Switches
3.3.1
Backing Up the InfiniBand switches
3.3.2
Recovering the InfiniBand Switches in a Physical Environment
3.3.3
Recovering the InfiniBand Switches in a Virtual Environment
3.4
Cisco Management Switch
3.4.1
Backing Up the Management Switch
3.4.2
Recovering the Management Switch in a Physical Environment
3.4.3
Recovering the Management Switch in a Virtual Environment
3.5
ZFS Storage Heads
4
Recovery of the Exalogic Control Stack from Hardware Failures and Corruption
4.1
Recovering from a Hardware Failure
4.1.1
Recovering the Database vServer from a Hardware Failure
4.1.2
Recovering the Oracle VM Manager vServer from a Hardware Failure
4.1.3
Recovering the Proxy Controller vServer from a Hardware Failure
4.1.4
Recovering the Enterprise Controller vServer from a Hardware Failure
4.2
Backing Up and Recovering Oracle VM Manager
4.2.1
Backing Up Oracle VM Manager
4.2.2
Restoring Oracle VM Manager
4.3
Recovering Oracle VM Manager After Database Corruption
5
Backup and Recovery of the Exalogic Control Repository and Stack
5.1
Recovering After Hardware Failure
5.2
Backing Up the Exalogic Control Repository
5.2.1
Stopping the Components of the Exalogic Control Stack
5.2.2
Shutting Down the Exalogic Control Virtual Machines
5.2.3
Creating a ZFS Snapshot of the Exalogic Control repository
5.2.4
Creating a Full Backup of the Exalogic Control Artifacts
5.2.5
Starting the Exalogic Control Stack
5.3
Restoring the Exalogic Control Repository
5.4
Restoring the Exalogic Control Stack
5.4.1
Restoring the Exalogic Control Stack from a ZFS Snapshot
5.4.2
Restoring the Exalogic Control Stack from a Full Backup
6
Backup and Recovery of Customer vServers
6.1
Backing Up Customer vServers
6.2
Restoring Customer vServers
6.2.1
Restoring a Customer vServer from a ZFS Snapshot
6.2.2
Restoring Customer vServers from a Full Backup
6.3
Re-creating vServers
Scripting on this page enhances content navigation, but does not change the content in any way.