| Skip Navigation Links | |
| Exit Print View | |
|
Oracle Solaris Cluster 3.3 Hardware Administration Manual Oracle Solaris Cluster |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Oracle Solaris Cluster 3.3 Hardware Administration Manual Oracle Solaris Cluster |
1. Introduction to Oracle Solaris Cluster Hardware
2. Installing and Configuring the Terminal Concentrator
3. Installing Cluster Interconnect Hardware and Configuring VLANs
4. Maintaining Cluster Interconnect Hardware
5. Installing and Maintaining Public Network Hardware
How to Configure Internal Disk Mirroring After the Cluster Is Established
How to Remove an Internal Disk Mirror
Configuring Cluster Nodes With a Single, Dual-Port HBA
Risks and Trade-offs When Using One Dual-Port HBA
Supported Configurations When Using a Single, Dual-Port HBA
Cluster Configuration When Using Solaris Volume Manager and a Single Dual-Port HBA
Expected Failure Behavior with Solaris Volume Manager
Failure Recovery with Solaris Volume Manager
Expected Failure Behavior with Solaris Volume Manager for Oracle Solaris Cluster
Failure Recovery with Solaris Volume Manager for Oracle Solaris Cluster
7. Campus Clustering With Oracle Solaris Cluster Software
This chapter contains information about node hardware in a cluster environment. It contains the following topics:
|