Part I Introducing System Administration: IP Services
1. Oracle Solaris TCP/IP Protocol Suite (Overview)
2. Planning Your TCP/IP Network (Tasks)
3. Introducing IPv6 (Overview)
4. Planning an IPv6 Network (Tasks)
5. Configuring TCP/IP Network Services and IPv4 Addressing (Tasks)
6. Administering Network Interfaces (Tasks)
7. Configuring an IPv6 Network (Tasks)
8. Administering a TCP/IP Network (Tasks)
9. Troubleshooting Network Problems (Tasks)
10. TCP/IP and IPv4 in Depth (Reference)
What's New in TCP/IP and IPv4 in Depth
How Name Services Affect the hosts Database
Creating the Network Mask for IPv4 Addresses
Network Databases and the nsswitch.conf File
How Name Services Affect Network Databases
Routing Protocols in Oracle Solaris
Routing Information Protocol (RIP)
ICMP Router Discovery (RDISC) Protocol
13. Planning for DHCP Service (Tasks)
14. Configuring the DHCP Service (Tasks)
15. Administering DHCP (Tasks)
16. Configuring and Administering the DHCP Client
17. Troubleshooting DHCP (Reference)
18. DHCP Commands and Files (Reference)
19. IP Security Architecture (Overview)
21. IP Security Architecture (Reference)
22. Internet Key Exchange (Overview)
24. Internet Key Exchange (Reference)
25. IP Filter in Oracle Solaris (Overview)
28. Administering Mobile IP (Tasks)
29. Mobile IP Files and Commands (Reference)
30. Introducing IPMP (Overview)
31. Administering IPMP (Tasks)
Part VII IP Quality of Service (IPQoS)
32. Introducing IPQoS (Overview)
33. Planning for an IPQoS-Enabled Network (Tasks)
34. Creating the IPQoS Configuration File (Tasks)
35. Starting and Maintaining IPQoS (Tasks)
36. Using Flow Accounting and Statistics Gathering (Tasks)
The inetd daemon starts up Internet standard services when a system boots, and can restart a service while a system is running. Use the Service Management Facility (SMF) to modify the standard Internet services or to have additional services started by the inetd daemon.
Use the following SMF commands to manage services started by inetd:
For administrative actions on a service, such as enabling, disabling, or restarting. For details, refer to the svcadm(1M) man page.
For querying the status of a service. For details, refer to the svcs(1) man page.
For displaying and modifying the properties of a service. For details, refer to the inetadm(1M) man page.
The proto field value in the inetadm profile for a particular service indicates the transport layer protocol on which the service runs. If the service is IPv4-only, the proto field must be specified as tcp, udp, or sctp.
For instructions on using the SMF commands, refer to SMF Command-Line Administrative Utilities in System Administration Guide: Basic Administration.
For a task that uses the SMF commands to add a service that runs over SCTP, refer to How to Add Services That Use the SCTP Protocol.
For information on adding services that handle both IPv4 requests and IPv6 requests, refer to inetd Internet Services Daemon