Halting, Rebooting, and Uninstalling Zones

How to Halt a Zone

The halt procedure is used to remove both the application environment and the virtual platform for a zone. To cleanly shut down a zone, see How to Use zlogin to Shut Down a Zone.

You must be the global administrator in the global zone to perform this procedure.

1. Become superuser, or assume the Primary Administrator role.

   To create the role and assign the role to a user, see Using the Solaris Management Tools With RBAC (Task Map) in System Administration Guide: Basic Administration.

2. List the zones running on the system.

   global# zoneadm list -v

   You will see a display that is similar to the following:

   ID  NAME     STATUS       PATH                           BRAND      IP
    0  global   running      /                              native     shared
    1  my-zone  running      /export/home/my-zone           native     shared

3. Use the zoneadm command with the -z option, the name of the zone, for example, my-zone, and the halt subcommand to halt the given zone.

   global# zoneadm -z my-zone halt

4. List the zones on the system again, to verify that my-zone has been halted.

   global# zoneadm list -iv

   You will see a display that is similar to the following:

   ID  NAME     STATUS       PATH                           BRAND      IP
    0  global   running      /                              native     shared
    -  my-zone  installed    /export/home/my-zone           native     shared

5. Boot the zone if you want to restart it.

   global# zoneadm -z my-zone boot

Troubleshooting

If the halt operation fails, see Zone Does not Halt for troubleshooting tips.

How to Reboot a Zone

You must be the global administrator in the global zone to perform this procedure.

1. Become superuser, or assume the Primary Administrator role.

   To create the role and assign the role to a user, see Using the Solaris Management Tools With RBAC (Task Map) in System Administration Guide: Basic Administration.

2. List the zones running on the system.

   global# zoneadm list -v

   You will see a display that is similar to the following:

   ID  NAME     STATUS       PATH                           BRAND      IP
    0  global   running      /                              native     shared
    1  my-zone  running      /export/home/my-zone           native     shared

3. Use the zoneadm command with the -z reboot option to reboot the zone my-zone.

   global# zoneadm -z my-zone reboot

4. List the zones on the system again to verify that my-zone has been rebooted.

   global# zoneadm list -v

   You will see a display that is similar to the following:

   ID  NAME     STATUS       PATH                           BRAND      IP
    0  global   running      /                              native     shared
    2  my-zone  running      /export/home/my-zone           native     shared

   ---

   Tip - Note that the zone ID for my-zone has changed. The zone ID generally changes after a reboot.

   ---

How to Uninstall a Zone

---

Caution - Use this procedure with caution. The action of removing all of the files in the zone's root file system is irreversible.

---

The zone cannot be in the running state. The uninstall operation is invalid for running zones.

You must be the global administrator in the global zone to perform this procedure.

1. Become superuser, or assume the Primary Administrator role.

   To create the role and assign the role to a user, see Using the Solaris Management Tools With RBAC (Task Map) in System Administration Guide: Basic Administration.

2. List the zones on the system.

   global# zoneadm list -v

   You will see a display that is similar to the following:

   ID  NAME     STATUS       PATH                           BRAND      IP
    0  global   running      /                              native     shared
    -  my-zone  installed    /export/home/my-zone           native     shared

3. Use the zoneadm command with the -z uninstall option to remove the zone my-zone.

   You can also use the -F option to force the action. If this option is not specified, the system will prompt for confirmation.

   global# zoneadm -z my-zone uninstall -F

4. List the zones on the system again, to verify that my-zone is no longer listed.

   global# zoneadm list -v

   You will see a display that is similar to the following:

   ID  NAME     STATUS       PATH                           BRAND      IP
    0  global   running      /                              native     shared

Troubleshooting

If a zone uninstall is interrupted, the zone is left in the incomplete state. Use the zoneadm uninstall command to reset the zone to the configured state.

Use the uninstall command with caution because the action is irreversible.