The following information updates the SunScreen EFS 3.0 Installation Guide.
The procedure shown in Chapter 5 of the SunScreen EFS 3.0 Installation Guide for installing the software on the Screen using self-generated certificates contains steps that do not apply when you install SunScreen EFS 3.0 in stealth mode.
Omit steps 17 through 19 when you use the procedure for installing the software on the Screen using self-generated certificates.
The following procedures describe how to upgrade to SunScreen EFS 3.0, revision B, from SunScreen EFS 3.0, revision A, on the Administration Station. These procedures are necessary only if you have previously installed and are running SunScreen EFS 3.0, revision A.
Identify the software version by typing:
# pkginfo -l SUNWicgSS |
This upgrade requires that the Administration Station be disconnected from the Screen while these procedures are performed.
Backup your Administration Station's configurations and store this backup in a secure location. It contains secret information like private keys.
Backing up your Administration Station's configuration is a safety precaution only. The configuration and keys are maintained during the upgrade.
On the Administration Station, open a terminal window and become root.
If you have installed any SunScreen EFS 3.0 patches, remove them.
Remove the SunScreen EFS 3.0, revision A, packages.
If you did not install all of these packages, omit the ones you did not install from the command, or remove the packages one at a time.
Follow the program prompts and answer all the questions with y.
The pkgrm program ends with the statement: Removal of name_of_package was successful.
Remove the SKIP software packages.
Use the following command if you installed all possible SKIP packages. If you have not installed all of the following SKIP packages, remove only the packages that you installed.
Follow the program prompts and answer all the questions with y.
The pkgrm program ends with the statement: Removal of name_of_package was successful.
Remove SKIP upgrade packages if you have installed them.
Use the following command if you installed all the possible SKIP upgrade packages. If you have not installed all of the following SKIP upgrade packages, remove only the packages that you installed.
Follow the program prompts and answer all the questions with y.
The pkgrm program ends with the statement: Removal of name_of_package was successful.
Reboot by typing:
# sync; init 6 |
Open a terminal window on the Administration Station and become root.
Verify that the File Manager is not running because it interferes with the operation of the volcheck command used for installation.
Install the required Solaris patches listed in Chapter 2 of the SunScreen EFS 3.0 Installation Guide, as necessary.
Insert the SunScreen EFS 3.0, revision B, CD-ROM into the Administration Station's CD-ROM drive.
Mount the CD-ROM by typing:
# volcheck |
Add the SunScreen EFS 3.0, revision B, packages. Follow step 6 for SPARC systems and step 7 for x86 systems.
Do not use the AdminInstaller to install SunScreen EFS 3.0, revision B, if you are upgrading from SunScreen EFS 3.0, revision A. If the AdminInstaller is used, your previous configurations can be corrupted!
For SPARC systems:
Run the package add command by typing:
# pkgadd -d /cdrom/cdrom0/sparc |
You are prompted with a menu of packages to install.
Select the SunScreen EFS 3.0, revision B, packages to be installed by typing:
# 1-5,8,10,12-17 |
For SPARC systems, the package menu that displays is as follows:
The following packages are available: 1 SUNWbdc SKIP Bulk Data Crypt (sparc) 1.5_revB 2 SUNWbdcx SKIP Bulk Data Crypt (64-bit) (sparc) 1.5_revB 3 SUNWdthj HotJava Browser for Solaris (sparc) 1.1.5,REV=1998.12.03 4 SUNWes SKIP End System (sparc) 1.5_revB 5 SUNWesx SKIP End System (64-bit) (sparc) 1.5_revB 6 SUNWfwcnv SunScreen Firewall conversion (sparc) 3.0_revB=19990714 7 SUNWhttp Sun WebServer daemon and supporting binaries (sparc) 2.0 8 SUNWicgSA SunScreen Administration Software (sparc) 3.0_revB=19990714 9 SUNWicgSD SunScreen online documentation (sparc) 3.0_revB=19990714 10 SUNWicgSM SunScreen man pages (sparc) 3.0_revB=19990714 ... 7 more menu choices to follow; <RETURN> for more choices, <CTRL-D> to stop display: 11 SUNWicgSS SunScreen Firewall (sparc) 3.0_revB=19990714 12 SUNWkeymg SKIP Key Manager Tools (sparc) 1.5_revB 13 SUNWkisup SKIP I-Support module (sparc) 1.5_revB 14 SUNWrc2 SKIP RC2 Crypto Module (sparc) 1.5_revB 15 SUNWrc4 SKIP RC4 Crypto Module (sparc) 1.5_revB 16 SUNWrc4x SKIP RC4 Crypto Module (64-bit) (sparc) 1.5_revB 17 SUNWsman SKIP Man Pages (sparc) 1.5_revB Select package(s) you wish to process (or 'all' to process all packages). (default: all) [?,??,q]: 1-5,8,10,12-17 |
The revision information in the package menu shown in this document might differ from what is displayed in your terminal window. The package names, however, will remain identical.
For x86 systems:
Run the package add command by typing:
# pkgadd -d /cdrom/cdrom0/i386 |
You are prompted with a menu of packages to install.
Select the SunScreen EFS 3.0, revision B, packages to be installed by typing:
# 1-3,6,8,10-14 |
For x86 systems, the package menu that displays is as follows:
The following packages are available: 1 SUNWbdc SKIP Bulk Data Crypt (i386) 1.5_revB 2 SUNWdthj HotJava Browser for Solaris (i386) 1.1.5,REV=1998.12.03 3 SUNWes SKIP End System (i386) 1.5_revB 4 SUNWfwcnv SunScreen Firewall conversion (i386) 3.0_revB=19990714 5 SUNWhttp Sun WebServer daemon and supporting binaries (i386) 2.0 6 SUNWicgSA SunScreen Administration Software (i386) 3.0_revB=19990714 7 SUNWicgSD SunScreen online documentation (i386) 3.0_revB=19990714 8 SUNWicgSM SunScreen man pages (i386) 3.0_revB=19990714 9 SUNWicgSS SunScreen Firewall (i386) 3.0_revB=19990714 10 SUNWkeymg SKIP Key Manager Tools (i386) 1.5_revB ... 4 more menu choices to follow; <RETURN> for more choices, <CTRL-D> to stop display: 11 SUNWkisup SKIP I-Support module (i386) 1.5_revB 12 SUNWrc2 SKIP RC2 Crypto Module (i386) 1.5_revB 13 SUNWrc4 SKIP RC4 Crypto Module (i386) 1.5_revB 14 SUNWsman SKIP Man Pages (i386) 1.5_revB Select package(s) you wish to process (or 'all' to process all packages). (default: all) [?,??,q]: 1-3,6,8,10-14 |
The revision information in the package menu shown in this document might differ from what is displayed in your terminal window. The package names, however, will remain identical.
Follow the program prompts, answering all the questions with y.
When completed, you return to the same menu of packages.
Type q to quit pkgadd.
Eject the CD-ROM from the Administration Station's CD-ROM drive by typing:
# eject cdrom0 |
Install any SKIP upgrade packages (Export Controlled [1024-bit] or U.S. and Canada Use Only [4096-bit] keys) as instructed in the documentation that is included with the upgrade SKIP CD-ROM.
See Appendix B of the SunScreen EFS 3.0 Installation Guide for additional information.
Reboot by typing:
# sync; init 6 |