test

Sun Cluster 3.0-3.1 With Sun StorEdge 3310 or 3320 SCSI RAID Array Manual

ProcedureHow to Replace a Terminator Module

Use this procedure to replace a RAID storage array terminator module.

Note –

If your configuration is running in RAID level 0, take appropriate action to prepare the volume manager for the impacted disk to be inaccessible.

Steps

  1. Detach the submirrors on the RAID storage array that are connected to the terminator module that you are replacing. Detach the submirrors to stop all I/O activity to the RAID storage array.

    For more information, see your Solstice DiskSuite/Solaris Volume Manager or VERITAS Volume Manager documentation.

  2. Replace the terminator module.

    For the procedure about how to replace the terminator module, see the Sun StorEdge 3000 Family FRU Installation Guide.

  3. Reattach the submirrors to resynchronize submirrors.

    For more information, see your Solstice DiskSuite/Solaris Volume Manager or VERITAS Volume Manager documentation.