How to Finish Upgrading to Sun Cluster 3.1 10/03 Software (Rolling)

1. Ensure that all upgrade procedures are completed for all cluster nodes that you are upgrading.

2. Are you using Sun Management Center to monitor your Sun Cluster configuration?

   • If no, proceed to Step 3.

   • If yes, perform the following steps

   1. Ensure that all Sun Management Center core packages are installed on the appropriate machines, as described in your Sun Management Center installation documentation.

      This step includes installing Sun Management Center agent packages on each cluster node.

   2. Become superuser on the Sun Management Center server machine.

   3. Insert the Sun Cluster 3.1 10/03 CD-ROM into the CD-ROM drive.

   4. Change to the /cdrom/suncluster_3_1/SunCluster_3.1/Sol_ver/Packages directory, where ver is 8 (for Solaris 8) or 9 (for Solaris 9) .

      # cd /cdrom/suncluster_3_1_u1/SunCluster_3.1/Sol_ver/Packages

   5. Install the Sun Cluster–module server package SUNWscssv.

      # pkgadd -d . SUNWscssv

   6. Change to the CD-ROM root directory and eject the CD-ROM.

   7. Become superuser on the Sun Management Center help-server machine.

   8. Repeat Step e through Step g to install the Sun Cluster–module help-server package SUNWscshl.

3. Reregister and re-version all resource types that received a new version from the upgrade, then re-enable resources and bring resource groups back online.

   1. From any node, start the scsetup(1M) utility.

      # scsetup

   2. To work with resource groups, type 2 (Resource groups).

   3. To register resource types, type 4 (Resource type registration).

      Type yes when prompted to continue.

   4. Type 1 (Register all resource types which are not yet registered).

      The scsetup utility displays all resource types that are not registered.

      Type yes to continue to register these resource types.

   5. Type 8 (Change properties of a resource).

      Type yes to continue.

   6. Type 3 (Manage resource versioning).

      Type yes to continue.

   7. Type 1 (Show versioning status).

      The scsetup utility displays which resources you can upgrade to new versions of the same resource type, and the state that the resource should be in before the upgrade can begin.

      Type yes to continue.

   8. Type 4 (Re-version all eligible resources).

      Type yes to continue when prompted.

   9. Return to the Resource Group Menu.

   10. Type 6 (Enable/Disable a resource).

       Type yes to continue when prompted.

   11. Select a resource to enable and follow the prompts.

   12. Repeat Step k for each disabled resource.

   13. When all resources are re-enabled, type q to return to the Resource Group Menu.

   14. Type 5 (Online/Offline or Switchover a resource group).

       Type yes to continue when prompted.

   15. Follow the prompts to bring each resource group online.

   16. Exit the scsetup utility.

       Type q to back out of each submenu, or press Ctrl-C.

4. Restart any applications.

   Follow the instructions that are provided in your third-party documentation.

The cluster upgrade is complete.