Example—Mirroring the Global Namespace
The following example shows creation of mirror d101, which consists of submirror d111 on partition c0t0d0s3 and submirror d121 on partition c2t2d0s3. The /etc/vfstab file entry for /global/.devices/node@1 is updated to use the mirror name d101. Disk c2t2d0 is a multiported disk, so the localonly property is enabled.
(Create the mirror) # metainit -f d111 1 1 c0t0d0s3 d111: Concat/Stripe is setup # metainit d121 1 1 c2t2d0s3 d121: Concat/Stripe is setup # metainit d101 -m d111 d101: Mirror is setup # metattach d101 d121 d101: Submirror d121 is attached (Edit the /etc/vfstab file) # vi /etc/vfstab #device device mount FS fsck mount mount #to mount to fsck point type pass at boot options # /dev/md/dsk/d101 /dev/md/rdsk/d101 /global/.devices/node@1 ufs 2 no global (View the sync status) # metastat d101 d101: Mirror Submirror 0: d111 State: Okay Submirror 1: d121 State: Resyncing Resync in progress: 15 % done … (Identify the device-ID name of the mirrored disk's raw-disk device group) # scdidadm -L … 1 phys-schost-3:/dev/rdsk/c2t2d0 /dev/did/rdsk/d2 (Display the device-group node list) # scconf -pvv | grep dsk/d2 Device group name: dsk/d2 … (dsk/d2) Device group node list: phys-schost-1, phys-schost-3 … (Remove phys-schost-3 from the node list) # scconf -r -D name=dsk/d2,nodelist=phys-schost-3 (Enable the localonly property) # scconf -c -D name=dsk/d2,localonly=true |
- © 2010, Oracle Corporation and/or its affiliates