Sun Cluster 軟體安裝指南 (適用於 Solaris 作業系統)

範例 – 在附加節點上配置 Sun Cluster 軟體

以下範例顯示執行的指令 scinstall 以及 scinstall 在節點 phys-schost-3 上完成配置作業時公用程式所記錄的訊息。 贊助節點為 phys-schost-1


 >>> Confirmation <<<
  
    Your responses indicate the following options to scinstall:
  
      scinstall -ik \
           -C sc-cluster \
           -N phys-schost-1 \
           -A trtype=dlpi,name=hme1 -A trtype=dlpi,name=hme3 \
           -m endpoint=:hme1,endpoint=switch1 \
           -m endpoint=:hme3,endpoint=switch2
  
    Are these the options you want to use (yes/no) [yes]?
  
    Do you want to continue with the install (yes/no) [yes]?
  
Checking device to use for global devices file system ... done
  
Adding node "phys-schost-3" to the cluster configuration ... done
Adding adapter "hme1" to the cluster configuration ... done
Adding adapter "hme3" to the cluster configuration ... done
Adding cable to the cluster configuration ... done
Adding cable to the cluster configuration ... done
  
Copying the config from "phys-schost-1" ... done
Setting the node ID for "phys-schost-3" ... done (id=3)
 
Verifying the major number for the "did" driver with "phys-schost-1" ...done
  
Checking for global devices global file system ... done
Updating vfstab ... done
  
Verifying that NTP is configured ... done
Installing a default NTP configuration ... done
Please complete the NTP configuration after scinstall has finished.
  
Verifying that "cluster" is set for "hosts" in nsswitch.conf ... done
Adding the "cluster" switch to "hosts" in nsswitch.conf ... done
  
Verifying that "cluster" is set for "netmasks" in nsswitch.conf ... done
Adding the "cluster" switch to "netmasks" in nsswitch.conf ... done
  
Verifying that power management is NOT configured ... done
Unconfiguring power management ... done
/etc/power.conf has been renamed to /etc/power.conf.61501001054
Power management is incompatible with the HA goals of the cluster.
Please do not attempt to re-configure power management.
  
Ensure that the EEPROM parameter "local-mac-address?" is set to "true" ...done
Ensure network routing is disabled ... done
Network routing has been disabled on this node by creating /etc/notrouter.
Having a cluster node act as a router is not supported by Sun Cluster.
Please do not re-enable network routing.
  
Log file - /var/cluster/logs/install/scinstall.log.9853
  
  
Rebooting ...