This section describes how the file systems were configured for the NFS application.
On nodeA and nodeB, create a mount point directory for the NFS file system.
For example:
nodeA# mkdir /global/mountpoint |
On nodeA and nodeB, configure the master volume to be mounted automatically on the mount point.
Add or replace the following text to the /etc/vfstab file on nodeA and nodeB. The text must be on a single line.
/dev/vx/dsk/devicegroup/vol01 /dev/vx/rdsk/devicegroup/vol01 \ /global/mountpoint ufs 3 no global,logging |
For a reminder of the volumes names and volume numbers used in the disk device group, see Figure 6–8.
On nodeA, create a volume for the file system information that is used by Sun StorEdge Availability Suite software.
nodeA# /usr/sbin/vxassist -g devicegroup make vol05 120m disk1 |
Volume 5 contains the file system information that is used by Sun StorEdge Availability Suite software.
On nodeA, resynchronize the device group with the Sun Cluster software.
nodeA# /usr/cluster/bin/scconf -c -D name=devicegroup,sync |
On nodeA, create the file system for volume 5.
nodeA# /usr/sbin/newfs /dev/vx/rdsk/devicegroup/vol05 |
On nodeA and nodeB, create a mount point for volume 5.
For example:
nodeA# mkdir /global/etc |
On nodeA and nodeB, configure volume 5 to be mounted automatically on the mount point.
Add or replace the following text to the /etc/vfstab file on nodeA and nodeB. The text must be on a single line.
/dev/vx/dsk/devicegroup/vol05 /dev/vx/rdsk/devicegroup/vol05 \ /global/etc ufs 3 yes global,logging |
Mount volume 5 on nodeA.
nodeA# mount /global/etc |
Make volume 5 accessible to remote systems.
Create a directory called /global/etc/SUNW.nfs on nodeA.
nodeA# mkdir -p /global/etc/SUNW.nfs |
Create the file /global/etc/SUNW.nfs/dfstab.nfs-rs on nodeA.
nodeA# touch /global/etc/SUNW.nfs/dfstab.nfs-rs |
Add the following line to the /global/etc/SUNW.nfs/dfstab.nfs-rs file on nodeA:
share -F nfs -o rw -d "HA NFS" /global/mountpoint |
Repeat the procedure in How to Configure the File System on the Primary Cluster for the NFS Application, with these exceptions:
Replace nodeA with nodeC.
Do not use nodeB.