Sun Cluster 3.0-3.1 With Sun StorEdge 6130 Array Manual

ProcedureInstall and Cable the Hardware

  1. Unpack, place, and level the storage array.

    For instructions, see the Sun StorEdge 6130 Array Getting Started Guide or the Sun StorEdge online documentation. For a list of array documentation, see Table P–2.

  2. (Optional) Install the Fibre Channel (FC) switch for the storage array if you do not have a switch installed.

    For the procedure about how to install an FC switch, see the documentation that shipped with your FC switch hardware.

  3. Connect the nodes to the service processor panel.

    • (SAN Configuration) Connect the FC switches to the service processor panel.

    • (Direct-Attached Configuration) Connect each node to the host ports on the array.

    For instructions, see the Sun StorEdge 6130 Array Getting Started Guide or the Sun StorEdge online documentation.

  4. Install the storage array.

    For instructions, see the Sun StorEdge 6130 Array Getting Started Guide or the Sun StorEdge online documentation.

  5. Power on the storage array and the nodes.

    For instructions, see the Sun StorEdge 6130 Array Getting Started Guide or the Sun StorEdge online documentation.