Log in to one of the cluster nodes.
You must be assigned the Geo Management RBAC rights profile to complete this procedure. For more information about RBAC, see Sun Cluster Geographic Edition Software and RBAC.
Activate the protection group.
When you activate a protection group, its application resource groups are also brought online.
# geopg start -e scope [-n] protection-group-name |
Specifies the scope of the command
If the scope is Local, then the command operates on the local cluster only. If the scope is Global, the command operates on both clusters that deploy the protection group.
The property values, such as Global and Local, are not case sensitive.
Prevents the start of data replication at protection group startup
If you omit this option, the data replication subsystem starts at the same time as the protection group.
Specifies the name of the protection group
The geopg start command uses the scswitch -Z -g resource-groups command to bring resource groups and resources online. For more information about using this command, see the scswitch(1M) man page.
The following example illustrates how the Sun Cluster Geographic Edition determines the Hitachi TrueCopy command used to start data replication.
First, the Hitachi TrueCopy protection group is created.
phys-paris-1# geopg create -s paris-newyork-ps -o primary -d truecopy tcpg |
A device group, devgroup1, is added to the protection group.
phys-paris-1# geopg add-device-group -p fence_level=async devgroup1 tcpg |
The current state of a Hitachi TrueCopydevice group, devgroup1, is given in the output of the pairdisplay command as follows:
phys-paris-1# pairdisplay -g devgroup1 Group PairVol(L/R) (Port#,TID,LU),Seq#,LDEV#,P/S,Status,Fence,Seq#,P-LDEV# M devgroup1 pair1(L) (CL1-A , 0, 1) 12345 1..SMPL ---- ----, ----- ---- - devgroup1 pair1(R) (CL1-C , 0, 20)54321 609..SMPL ---- ----, ----- ---- - devgroup1 pair2(L) (CL1-A , 0, 2) 12345 2..SMPL ---- ----, ----- ---- - devgroup1 pair2(R) (CL1-C , 0,21) 54321 610..SMPL ---- ----, ----- ---- - |
The aggregate device group state is SMPL.
Next, the protection group, tcpg, is activated by using the geopg start command.
phys-paris-1# geopg start -e local tcpg |
The Sun Cluster Geographic Edition software executes the paircreate -g devgroup1 -vl -f async command at the data replication level. If the command is successful, the state of devgroup1 is given in the output of the pairdisplay command as follows:
phys-paris-1# pairdisplay -g devgroup1 Group PairVol(L/R) (Port#,TID,LU),Seq#,LDEV#,P/S,Status,Fence,Seq#,P-LDEV# M devgroup1 pair1(L) (CL1-A , 0, 1) 12345 1..P-VOL COPY ASYNC,54321 609 - devgroup1 pair1(R) (CL1-C , 0, 20)54321 609..S-VOL COPY ASYNC,----- 1 - devgroup1 pair2(L) (CL1-A , 0, 2) 12345 2..P-VOL COPY ASYNC,54321 610 - devgroup1 pair2(R) (CL1-C , 0,21) 54321 610..S-VOL COPY ASYNC,----- 2 - |
The following example illustrates how to activate a protection group globally:
# geopg start -e global tcpg |
The protection group, tcpg, is activated on both clusters where the protection group is configured.
The following example illustrates how to activate a protection group on a local cluster only. This local cluster might be a primary cluster or a secondary cluster, depending on the cluster's role.
# geopg start -e local tcpg |