After you have added the device group to the protection group, avspg, you can manually enable the Sun StorEdge Availability Suite 3.2.1 volume sets.
The following example illustrates how to manually enable a Solaris Volume Manager volume set:
phys-paris-1# /usr/opt/SUNWesm/sbin/sndradm -e logicalhost-paris-1 \ /dev/md/avsset/rdsk/d100 /dev/md/avsset/rdsk/d101 \ logicalhost-newyork-1 /dev/md/avsset/rdsk/d100 \ /dev/md/avsset/rdsk/d101 ip async C avsset |
The following example illustrates how to manually enable a VERITAS Volume Manager volume set:
phys-paris-1# /usr/opt/SUNWesm/sbin/sndradm -e logicalhost-paris-1 /dev/vx/rdsk/avsdg/vol-data-paris /dev/vx/rdsk/avsdg/vol-bitmap-paris logicalhost-newyork-1 /dev/vx/rdsk/avsdg/vol-data-newyork /dev/vx/rdsk/avsdg/vol-bitmap-newyork ip async C avsdg |
The following example illustrates how to manually enable a raw device volume set:
phys-paris-1# /usr/opt/SUNWesm/sbin/sndradm -e logicalhost-paris-1 /dev/did/rdsk/d3s3 /dev/did/rdsk/d3s4 logicalhost-newyork-1 /dev/did/rdsk/d3s5 /dev/did/rdsk/d3s6 ip async C dsk/d3 |
Information about sndradm command execution is printed in the Sun StorEdge Availability Suite 3.2.1 log file, /var/opt/SUNWesm/ds.log. Refer to this file if you encounter errors while manually enabling the volume set.