Start replication for the devgroup1 device group.
phys-paris-1# symrdf -g devgroup1 -noprompt establish An RDF 'Incremental Establish' operation execution is in progress for device group 'devgroup1'. Please wait... Write Disable device(s) on RA at target (R2)..............Done. Suspend RDF link(s).......................................Done. Mark target (R2) devices to refresh from source (R1)......Started. Device: 054 ............................................. Marked. Mark target (R2) devices to refresh from source (R1)......Done. Suspend RDF link(s).......................................Done. Merge device track tables between source and target.......Started. Device: 09C ............................................. Merged. Merge device track tables between source and target.......Done. Resume RDF link(s)........................................Done. The RDF 'Incremental Establish' operation successfully initiated for device group 'devgroup1'. |
Confirm that the state of the EMC Symmetrix Remote Data Facility pair is synchronized.
phys-newyork-1# symrdf -g devgroup1 verify All devices in the RDF group 'devgroup1' are in the 'Synchronized' state. |
Split the pair by using the symrdf split command.
phys-paris-1# symrdf -g devgroup1 -noprompt split An RDF 'Split' operatiaon execution is in progress for device group 'devgroup1'. Please wait... Suspend RDF link(s).......................................Done. Read/Write Enable device(s) on RA at target (R2)..........Done. The RDF 'Split' operation device group 'devgroup1'. |
Enable all the volumes to be scanned.
phys-newyork-1# vxdctl enable |
Import the VERITAS Volume Manager disk group, dg1.
phys-newyork-1# vxdg -C import dg1 |
Verify that the VERITAS Volume Manager disk group was successfully imported.
phys-newyork-1# vxdg list |
Enable the VERITAS Volume Manager volume.
phys-newyork-1# /usr/sbin/vxrecover -g dg1 -s -b |
Verify that the VERITAS Volume Manager volumes are recognized and enabled.
phys-newyork-1# vxprint |
Register the VERITAS Volume Manager disk group, dg1, in Sun Cluster software.
phys-newyork-1# scconf -a -D type=vxvm, name=dg1, \ nodelist=phys-newyork-1:phys-newyork-2 |
Add an entry to the /etc/vfstab file on phys-newyork-1.
phys-newyork-1# /dev/vx/dsk/dg1/vol1 /dev/vx/rdsk/dg1/vol1 \ /mounts/sample ufs 2 no logging |
Create a mount directory on newyork.
phys-newyork-1# mkdir -p /mounts/sample phys-newyork-2# mkdir -p /mounts/sample |
Create an application resource group, apprg1, by using the scrgadm command.
phys-newyork-1# scrgadm -a -g apprg1 |
Create the HAStoragePlus resource in apprg1.
phys-newyork-1# scrgadm -a -j rs-hasp -g apprg1 -t SUNW.HAStoragePlus \ -x FilesystemMountPoints=/mounts/sample -x AffinityOn=TRUE \ -x GlobalDevicePaths=dg1 \ |
Confirm that the application resource group is correctly configured by bringing it online and taking it offline again.
phys-newyork-1# scswitch -Z -g apprg1 phs-newyork-1# scswitch -F -g apprg1 |
Unmount the file system.
phys-newyork-1# umount /mounts/sample |
Take the Sun Cluster device group offline.
phys-newyork-1# scswitch -F -D dg1 |
Verify that the VERITAS Volume Manager disk group was deported.
phys-newyork-1# vxdg list |
Reestablish the EMC Symmetrix Remote Data Facility pair.
phys-newyork-1# symrdf -g devgroup1 -noprompt establish |
Initial configuration on the secondary cluster is now complete.