The MIB-II (simple) module is used to identify a Sun Management Center agent. If this module is not loaded, the agent can only be created as a ping host or as an SNMP host.
The tables that are in this section provide a brief description of the properties for Simple MIB-II managed objects.
The following table provides a brief description of the properties for System Group.
Table C–93 System Group Properties
Property |
Description |
---|---|
System Description |
MIB-II system description or the description of the host (read-write) |
System OID |
Object identifier or the Object ID (OID) of the software system |
Time Since Up |
Time in microseconds since the system is up |
System Contact |
The contact name for the system |
System Name |
The qualified host name on which the agent is running (read-write) |
System Location |
The physical location of the host (read-write) |
System Services |
Sum integer value indicating the set of services primarily offered |
The Number of Interfaces group property indicates the number of interfaces to the machine, including the loopback. Additional interfaces properties are described in the following table.
Table C–94 Interfaces Table
Property |
Description |
---|---|
IF Index |
Index of the interface in this table |
IF Descr |
Description of the interface |
IF Type |
Type of the interface |
IF Largest MTU |
Size of the largest datagram that can be sent on the interface |
IF Speed |
Bandwidth of the interface |
IF Physical Address |
Physical address of the interface |
IF Admin Status |
Desired state of the interface |
IF Oper Status |
Operational state of the interface |
IF Last Change |
Value of sysUpTime (that is, time when the system is up and running) when the operational state has changed last time |
IF In Octets |
Octets received on the interface |
IF In Unicast Pkts |
Unicast packets received on the interface |
IF In nonUnicast Pkts |
Non-unicast packets received on the interface |
IF In Discards |
Number of packets on the interface that are chosen to be discarded |
IF In Errors |
Number of inbound packets on the interface that contained errors |
IF In Unknown Protos |
Number of packets with unsupported protocol that were received on the interface |
IF Out Octets |
Number of octets that are transmitted out on the interface |
IF Out Unicast Pkts |
Number of unicast packets transmitted out on the interface |
IF Out nonUnicast Pkts |
Number of non-unicast packets transmitted out on the interface |
IF Out Discards |
Number of outbound packets on the interface that contained errors |
IF Out Errors |
Number of outbound packets that could not be transmitted because of errors |
IF Out Queue Length |
Length of the output packet queue |
IF Specific |
Reference to the MIB definitions specific to the particular media |
The IP Forwarding group property indicates whether this entity is a gateway. Additional IP route properties are described in the following table.
Table C–95 IP Route Table
Property |
Description |
---|---|
IP Route Destination |
Destination IP address of the route |
IP Route IfIndex |
Index of the interface in the interface table through which the next hop of this route is reached |
IP Route Metric1 |
Primary routing metric for the route that is specific to the routing 1 protocol |
IP Route Metric2 |
Alternate routing metric for the route that is specific to the routing 2 protocol |
IP Route Metric3 |
Alternate routing metric for the route that is specific to the routing 3 protocol |
IP Route Metric4 |
Alternate routing metric for the route that is specific to the routing 4 protocol |
IP Route NextHop |
IP address of the next hop of this route |
IP Route Type |
Type of route |
IP Route Proto |
Routing mechanism through which this route was learned |
IP Route Age |
Number of seconds since the route was last updated |
IP Route Mask |
Mask to be logical and with the destination address before being compared to the route destination |
IP Route Metric5 |
Alternate routing metric for the route that is specific to the routing 5 protocol |
IP Route Info |
Reference to MIB definitions specific to the routing protocol |
The following table describes the IP address properties.
Table C–96 IP Address Table Properties
Property |
Description |
---|---|
IPAT IP Address |
IP Address Table Entry IP Address in MIB-II |
IPAT IfIndex |
|
IPAT Net Mask |
|
IPAddTab R MaxSize |
|