bfe(7D)

Name | Description | Files | Attributes | See Also

Name

bfe– Device driver for Broadcom BCM4401 100Base-T NIC

Description

The bfe Fast Ethernet driver is GLD-based and supports the Broadcom BCM4401 100Base-T NIC adapters :pci14e4,170c Broadcom BCM4401 100Base-T..

The bfe driver supports IEEE 802.3 auto-negotiation, flow control and VLAN tagging.

Configuration

The default configuration is auto-negotiation with bidirectional flow control. The advertised capabilities for auto-negotiation are based on the capabilities of the PHY.

You can set the capabilities advertised by the bfe controlled device using dladm(1M). The driver supports only those parameters which begin with en (enabled) in the parameters listed by the command dladm(1M). Each of these boolean parameters determines if the device advertises that mode of operation when the hardware supports it.

Files

/dev/bfe

Special character device

/kernel/drv/bfe

32-bit device driver (x86)

/kernel/drv/amd64/bfe

64-bit device driver (x86)

Attributes

See attributes(5) for a description of the following attributes:

ATTRIBUTE TYPE	ATTRIBUTE VALUE
Architecture	SPARC, x86

See Also

dladm(1M), netstat(1M), driver.conf(4), attributes(5), ieee802.3(5), dlpi(7P), streamio(7I)

Writing Device Drivers

STREAMS Programmer's Guide

Network Interface Guide

IEEE 802.3ae Specification - 2002

Name | Description | Files | Attributes | See Also