How to Install the Chassis Foot Glides

Before You Begin

Complete this task:

• "How to Power Off the System"

• "How to Remove the Floor Casters Assembly"

What to Do

1. Carefully turn the system chassis upside down.

   Enlist the help of another person to accomplish this safely.

   Do not lift the chassis using the plastic panels at the front or the side of the chassis. Place the system onto a solid surface that spaces the unit about 2 inches (5 cm) off the floor; for example, use a pair of wooden boards. Do not allow any of the weight to rest on the plastic panels at the front of the chassis.

2. Attach the four plastic foot glides to the corresponding mounting holes on the underside of the chassis.

   Insert a Phillips screw through the center of each foot glide.

   ---

   Note -

   Two of the plastic foot glides attach directly to the chassis. The other two glides are attached using mounting brackets. These brackets should already be installed on your system. If they are missing, install the two mounting brackets provided with the foot glides. Use two Phillips screws to attach each bracket.

   ---

   Figure 8-22  

   
   

3. Carefully return the chassis to its upright position.

   Enlist the help of another person to accomplish this safely. Do not lift the chassis using the plastic panels at the front or the side of the chassis.