Labelling the System

The front of the server has an area for a label where you can list the system name or other information. The document set includes gray paper that is suitable for a label.

To add a label to the front of the system:

1. Remove the top front bezel.

   Refer to the Sun Enterprise 6500/5500/4500 Systems Reference Manual for details:

   • Enterprise 6500/5500 systems: refer to the section, "Top Front Bezel."

   • Enterprise 4500 system: refer to the section, "Top Bezel."

2. Snap out the narrow transparent window.

   From the rear side of the bezel, gently squeeze the top and bottom edges together as you simultaneously push the transparent window out through the front of the bezel.

3. Choose the information that will appear on the label.

   Common items include the name of the server, IP address, name and contact information for the system administrator, and the group of users that the machine services.

4. Use the colored paper provided with the system to make a label.

   Print or write the desired information and cut the label to fit the transparent window. The label should be 12 mm x 150 mm (0.5 in x 5.9 in).

5. Place the label inside the window, and snap the window back in place from the front side of the bezel.