Sun Management Center Change Manager 1.0 Administration Guide

How to Install Sun Management Center 3.0 Update 4 Server Software on the Change Manager Server

Before you begin the installation of Change Manager software, see Change Manager Server Requirements to understand the hardware and software requirements for the Change Manager server.

Installing the Sun Management Center server software also installs the Sun Management Center agents.

The following procedure describes the steps for performing the installation from a CD. To perform web installations of the Sun Management Center software, see "To Install the Sun Management Center Packages From the Web in a Solaris Environment"' in Sun Management Center 3.0 Software Installation Guide.


Note -

These instructions describe how to install the Sun Management Center software and add-on packages that are required by Change Manager.


See "Installing the Sun Management Center 3.0 Software" in the Sun Management Center 3.0 Software Installation Guide for instructions on installing Sun Management Center software.

  1. Become superuser.

  2. Set the JAVA_HOME environment variable.


    # JAVA_HOME=/usr/java export JAVA_HOME
    
  3. Disable the SNMP agent to avoid agent port conflict with the Sun Management Center agent.

    See How to Disable the SNMP Daemon to Avoid Port 161 Conflict.

  4. Insert the Sun Management Center 3.0 1 of 3 CD into the CD-ROM drive.


    Caution - Caution -

    Do not be in the /cdrom/cdrom0/sbin directory or in any directory on the CD when you run the es-inst command. Running the command in this way causes problems when changing to subsequent Sun Management Center 3.0 CDs, as you cannot unmount an active CD.


  5. Run the /cdrom/cdrom0/sbin/es-inst command to install the Sun Management Center software.


    # /cdrom/cdrom0/sbin/es-inst
    
  6. Specify the target directory.

    By default, the target directory is /opt. To accept the default, press Return.

  7. Install the production environment by typing 1 at the prompt.

  8. Install the components of the Server Layer.

    1. Type y at the Server Layer prompt.

    2. Type n at the Agent Layer prompt and the Console Layer prompt.


      Note -

      Installing the Server Layer also installs the Agent Layer.

      The Agent Layer and Console Layer are not required by Change Manager. However, if you type y to install these layers, the layers are installed.

      If you plan to use the Change Manager server as a fully functional Sun Management Center server, you must install the agent and console components.


      If the amount of disk space available in /var/opt/SUNWsymon is insufficient, you are asked to specify a directory name that has sufficient disk space. Supply the name of a directory in a disk slice that has at least 770 Mbytes of free disk space.

      Packages are installed.

  9. Install the Premier Management Applications, the add-on products, and the platform support add-ons.

    1. Type y at the Advanced System Monitoring prompt if you want to install it.

      Type n if you do not want to install it.

      This product is not required for Change Manager.

    2. Type y at the Premier Management Applications prompt.

      This product is required for Change Manager.

    3. Type y at any other add-on product prompts to install them.

      Type n if you do not want to install the products.

      None of these add-on products are required for Change Manager.

    4. Type y at the platform support prompt that matches the hardware of your Change Manager server.

      This product is required for Change Manager.

    5. Type y at any other platform support prompts to install support for other hardware.

      Type n if you do not want to install the products.

      None of these add-on products are required for Change Manager unless the platform package matches your server type.

  10. Press Return at the Premier Management Applications Product license prompt.


    Note -

    You might require product licenses for any add-on products you install to enable them.


  11. When prompted, insert the Sun Management Center 3.0 2 of 3 CD into the CD-ROM drive, and press Return.

    Packages are installed.

  12. Install the platform package for this system.

    For example, if your system is a NetraTM, install the Netra platform package.

  13. When prompted, insert the Sun Management Center 3.0 3 of 3 CD into the CD-ROM drive, and press Return.

    Packages are installed.

  14. When all the packages are installed, run the setup by typing y at the prompt.

  15. When asked about updating the /etc/system file with changes required to support the Sun Management Center database, type y.

    1. Determine whether you need to install the Sun Management Center 3.0 Update 4 patch that supports Change Manager.

      Change Manager requires patch 110938-06 or later.

    2. Reboot the system for the changes to /etc/system to take effect.


      # reboot
      
    3. After the system boots, log in as superuser.

    4. Run the es-setup command.


      # /opt/SUNWsymon/sbin/es-setup
      
  16. Create an agent seed to generate keys.


    Note -

    Use the same seed for all the machines you install. Keep a record of this seed for future use.

    For instructions on changing the seed, see How to Regenerate the Security Keys by Changing the Seed.


    1. Type the seed at the first prompt.

      The seed you type is not echoed to the display.

    2. Type the seed at the second prompt to confirm your choice.

    This part of the setup generates security keys that are used for communicating between processes. A seed must be provided to initialize the keys.

  17. Designate a user to be the Sun Management Center administrator by typing root at the prompt.

  18. Specify the base URL to Sun Management Center help.


    Please enter base URL to Sun Management Center help [local]: 

    Press Return to use local as the location for the help.

  19. Determine whether to set up the Sun FireTM (6800/4810/4800/3800) platform administration module.

    • If you do not need this module, type n.

    • If you need this module to support your platform, type y and provide the requested information.

  20. (Optional) If es-setup detects that agent port 161 is already in use by SNMP, specify a different port number for the agent by doing the following:

    1. Type y at the prompt.

    2. Type a port number from 1100 to 65535 at the prompt (for example, 1161).

      You can disable SNMP and rerun the setup. See How to Disable the SNMP Daemon to Avoid Port 161 Conflict.

  21. After the setup is performed for the platform packages you installed, wait for the Sun Management Center database setup to complete.

    This step might take 15 to 20 minutes.


    Caution - Caution -

    Avoid interrupting the database setup procedure. Interrupting this procedure might leave the Oracle database in an inconsistent state. When left in such a state, you might need to reboot the system.


  22. Start the Sun Management Center agent and server components by typing y the prompt.