test

N1 Grid Service Provisioning System User's Guide and Release Notes for the OS Provisioning Plug-In 1.0

Adding a JET Module

This section describes how you can add additional JET modules to the Solaris boot and install (JET) server. Although the process is describes in the context of a Flash module, the logic extends to other JET modules.

ProcedureHow to Add a Flash Module

Steps

  1. Download the JetFLASH.pkg onto the Solaris boot and install server.

  2. Install the JetFLASH package.

    Use commands similar to the following example:


    # cat >/tmp/admin-file <<- _EOF
mail=\n
instance=unique
partial=quit
runlevel=ask
idepend=quit
rdepend=nocheck
space=quit
setuid=nocheck
conflict=nocheck
action=nocheck
basedir=/opt/SUNWjet/Products
_EOF
  pkgadd -a /tmp/admin-file -d JetFLASH.pkg

  3. Copy the Flash image to the Solaris boot and install server.

    Use commands similar to the following example:


    # telnet solaris-bis-ip-address 
  # cp flash-archive /export/install/flash/sol10_xall_sparc.flar

  4. Create a Solaris Profile for this Flash image.

    Use commands similar to the following example:


    # cat > /tmp/flash-profile <<- _EOF
flash-with-ra
Solaris10 Flash Archive With SPS RA
base_config flash spsra
_EOF
cr_cli -cmd pe.p.run -u admin -p admin -PID NM:/com/sun/n1osp/untyped/SolarisImage-attach \
-tar H:NM:masterserver-jet -comp + -vs solaris10 -pto 120 -nto 120 -f /tmp/flash-profile
    Tip –

    You can also create the Profile component through the N1 Grid SPS browser interface. Use the Solaris Image: create profile option.

  5. Edit the Profile component that you created in the previous step.

    The profile is located at /com/sun/n1osp/autogen-masterserver-jet/provision/. In this example task, the Profile component is /com/sun/n1osp/autogen-masterserver-jet/provision/Solaris_10.flash.

  6. In the Profile component, change the archive_locations_flash variable value to point to the flash archive.

    For example:

    archive_locations_flash nfs://10.216.0.55/export/install/flash/sol10_xall_sparc.flar

  7. Check in the component.

    You are now ready to use the above Solaris Profile to deploy on desired target host.