Download the JetFLASH.pkg onto the Solaris boot and install server.
Install the JetFLASH package.
Use commands similar to the following example:
# cat >/tmp/admin-file <<- _EOF mail=\n instance=unique partial=quit runlevel=ask idepend=quit rdepend=nocheck space=quit setuid=nocheck conflict=nocheck action=nocheck basedir=/opt/SUNWjet/Products _EOF pkgadd -a /tmp/admin-file -d JetFLASH.pkg |
Copy the Flash image to the Solaris boot and install server.
Use commands similar to the following example:
# telnet solaris-bis-ip-address # cp flash-archive /export/install/flash/sol10_xall_sparc.flar |
Create a Solaris Profile for this Flash image.
Use commands similar to the following example:
# cat > /tmp/flash-profile <<- _EOF flash-with-ra Solaris10 Flash Archive With SPS RA base_config flash spsra _EOF cr_cli -cmd pe.p.run -u admin -p admin -PID NM:/com/sun/n1osp/untyped/SolarisImage-attach \ -tar H:NM:masterserver-jet -comp + -vs solaris10 -pto 120 -nto 120 -f /tmp/flash-profile |
You can also create the Profile component through the N1 Grid SPS browser interface. Use the Solaris Image: create profile option.
Edit the Profile component that you created in the previous step.
The profile is located at /com/sun/n1osp/autogen-masterserver-jet/provision/. In this example task, the Profile component is /com/sun/n1osp/autogen-masterserver-jet/provision/Solaris_10.flash.
In the Profile component, change the archive_locations_flash variable value to point to the flash archive.
For example:
archive_locations_flash nfs://10.216.0.55/export/install/flash/sol10_xall_sparc.flar
Check in the component.
You are now ready to use the above Solaris Profile to deploy on desired target host.