Appendix A Target Host Variables
Each type of target host has a number of specific configuration variables. This appendix contains a series of tables that explain the variables that apply to each target host type.
Sun IPMI Target Host Variables
The following list shows all component variables for the Sun IPMI target host. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
- installPath
-
Description: Physical host name for the target system.
Example: sunfire-v60x-host
- target_host
-
Description: Virtual host name for the target system.
Default value: :[installPath]-target
- description
-
Description: Optional description of the target.
Example: test v60x
- ethernet_mac_address
-
Description: Mac address.
Example: 00:0E:0C:07:E9:31
- ethernet_ip_address
-
Description: IP address.
Example: 10.42.42.77
- ethernet_netmask
-
Description: Network mask.
Default value: 255.255.255.0
- architecture
-
Description: Target architecture (for example, sun4u, x86).
Default value: x86
- kernel_arch
-
Description: Kernel architecture (sun4u, i86pc).
Default value: i86pc
- disk_size
-
Description: Size of disk.
Example: 20GB
- osp_control_service
-
Description: Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False).
Default value: TRUE
- sps_ra_parent
-
Description: Name of parent for Remote Agent (RA).
Default value: masterserver
- sps_ra_parent_type
-
Description: Whether RA parent is an MS (masterserver) or an LD (local distributor).
Default value: MS
- sps_ra_host
-
Description: Name or IP address for RA host.
Default value: :[installPath]
- sps_ra_conn
-
Description: Type of RA connection (raw, ssl, ssh).
Default value: raw
- sps_ra_ssl_auth
-
Description: Whether RA has SSL authorization (y,n).
Default value: N
- sps_ra_port
-
Description: Port for RA.
Default value: 1131
- sps_ra_adv_parms
-
Description: Advanced parameters for RA.
- guid
-
Description: GUID of the target specified within {}
Note –The GUID must be in the form {dddddddd-dddd-dddd-dddd-dddddddddddd}, where d is a hexadecimal text digit.
- ipmi_ip_address
-
Description: IPMI IP address
Example: 10.5.133.135
- ipmi_access_userid
-
Description: User ID to access IPMI
- ipmi_access_password
-
Description: Encrypted Password to access IPMI
- ssh_access_userid
-
Description: SSH user ID to access the remote management interface.
- ssh_access_password
-
Description: Encrypted SSH password to access the remote management interface.
Sun ALOM Target Host Variables
The following list shows all component variables for the Sun ALOM target host. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
- installPath
-
Description: Physical host name for the target system
Example: sunfire-v60x-host
- target_host
-
Description: Virtual host name for the target system
Default value: :[installPath]-target
- description
-
Description: Optional description of the target
Example: test v60x
- ethernet_mac_address
-
Description: Mac address
Example: 00:0E:0C:07:E9:31
- ethernet_ip_address
-
Description: IP address
Example: 10.42.42.77
- ethernet_netmask
-
Description: Network mask
Default value: 255.255.255.0
- architecture
-
Description: Target architecture (for example, sun4u, x86)
Default value: sun4u
- kernel_arch
-
Description: Kernel architecture (sun4u, i86pc)
Default value: sun4u
- disk_size
-
Description: Size of disk
Default value: 20GB
- osp_control_service
-
Description: Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False)
Default value: TRUE
- sps_ra_parent
-
Description: Name of parent for RA
Default value: masterserver
- sps_ra_parent_type
-
Description: Whether RA parent is an MS or an LD
Default value: MS
- sps_ra_host
-
Description: Name or IP address of RA host
Default value: :[installPath]
- sps_ra_conn
-
Description: Type of RA connection (raw, ssl, ssh)
Default value: raw
- sps_ra_ssl_auth
-
Description: Whether RA has SSL authorization (y,n)
Default value: N
- sps_ra_port
-
Description: Port for RA
Default value: 1131
- sps_ra_adv_parms
-
Description: Advanced parameters for RA
- alom_ip_address
-
Description: ALOM IP address
Example: 10.5.133.135
- alom_access_userid
-
Description: User id to access ALOM
- alom_access_password
-
Description: Encrypted password to access ALOM
- terminal_server_ip_address
-
Description: IP address of terminal server connected to this system
Example: 10.5.133.135
- terminal_server_port
-
Description: Port of terminal server
- terminal_server_userid
-
Description: Terminal server user id
- terminal_server_password
-
Description: Encrypted password for terminal server
- terminal_server_type
-
Description: Terminal server type
Default value: Cisco2621
- terminal_server_version
-
Description: Terminal server version
- terminal_server_hal_jar
-
Description: Path to terminal server hardware abstraction layer (HAL) JAR file
Default value: file:///opt/n1osp/drivers/cisco/c2621.jar
Sun LOM Target Host Variables
The following list shows all component variables for the Sun LOM target host. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
- installPath
-
Description: Physical host name for the target system
Example: sunfire-v60x-host
- target_host
-
Description: Virtual host name for the target system
Default value: :[installPath]-target
- description
-
Description: Optional description of the target
Example: test v60x
- ethernet_mac_address
-
Description: Mac address
Example: 00:0E:0C:07:E9:31
- ethernet_ip_address
-
Description: IP address
Example: 10.42.42.77
- ethernet_netmask
-
Description: Network mask
Default value: 255.255.255.0
- architecture
-
Description: Target architecture (for example, sun4u, x86)
Default value: sun4u
- kernel_arch
-
Description: Kernel architecture (sun4u, i86pc)
Default value: sun4u
- disk_size
-
Description: Size of disk
Default value: 20GB
- osp_control_service
-
Description: Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False)
Default value: TRUE
- sps_ra_parent
-
Description: Name of parent for RA
Default value: masterserver
- sps_ra_parent_type
-
Description: Whether RA parent is an MS or an LD
Default value: MS
- sps_ra_host
-
Description: Name or IP address of RA host
- sps_ra_conn
-
Description: Type of RA connection (raw, ssl, ssh)
Default value: raw
- sps_ra_ssl_auth
-
Description: Whether RA has SSL authorization (y,n)
Default value: N
- sps_ra_port
-
Description: Port for RA
Default value: 1131
- sps_ra_adv_parms
-
Description: Advanced parameters for RA
- disk_type
-
Description: SCSI or IDE
Default value: scsi
- lom_version
-
Description: LOM version
- lom_hal_jar
-
Description: Path to LOM HAL JAR file
Default value: file://:[targetableComponent:installPath]/SUNWn1osp/drivers/sun/lom.jar
- terminal_server_ip_address
-
Description: IP address of terminal server connected to this system
Example: 10.5.133.135
- terminal_server_port
-
Description: Port of terminal server
- terminal_server_userid
-
Description: Terminal server user id
- terminal_server_password
-
Description: Encrypted value for terminal server password
- terminal_server_type
-
Description: Terminal server type
Default value: Cisco2621
- terminal_server_version
-
Description: Terminal server version
- terminal_server_hal_jar
-
Description: Path to terminal server HAL JAR file
Default value: file://:[targetableComponent:installPath]/SUNWn1osp/drivers/cisco/c2621.jar
- power_service_true_false
-
Description: Does the network management interface provide power on/off service
Default value: true
- boot_service_true_false
-
Description: Does the network management interface provide boot service (boot order disk/network)
Default value: true
- console_service_true_false
-
Description: Does the network management interface provide console
Default value: false
Sun Mid-Range Target Host Variables
The following list shows all component variables for the Sun mid-range target host. The SunMidRange component uses these variables. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
- installPath
-
Description: Physical host name for the target system
Example: sunfire-v60x-host
- target_host
-
Description: Virtual host name for the target system
Default value: :[installPath]-target
- description
-
Description: Optional description of the target
Example: test v60x
- ethernet_mac_address
-
Description: Mac address
Example: 00:0E:0C:07:E9:31
- ethernet_ip_address
-
Description: IP address
Example: 10.42.42.77
- ethernet_netmask
-
Description: Network mask
Default value: 255.255.255.0
- architecture
-
Description: Target architecture (for example, sun4u, x86)
Default value: sun4u
- kernel_arch
-
Description: Kernel architecture (sun4u, i86pc)
Default value: sun4u
- disk_size
-
Description: Size of disk
Default value: 20GB
- osp_control_service
-
Description: Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False)
Default value: TRUE
- sps_ra_parent
-
Description: Name of parent for RA
Default value: Name of parent for RA
- sps_ra_parent_type
-
Description: Whether RA parent is an MS or an LD
Default value: MS
- sps_ra_host
-
Description: Name or IP address for RA host
- sps_ra_conn
-
Description: Type of RA connection (raw, ssl, ssh)
Default value: raw
- sps_ra_ssl_auth
-
Description: Whether RA has SSL authorization (y,n)
Default value: N
- sps_ra_port
-
Description: Port for RA
Default value: 1131
- sps_ra_adv_parms
-
Description: Advanced parameters for RA
- domain_name
-
Description: Domain
- domainsc_access_userid
-
Description: User id to access domain SC
- domainsc_access_password
-
Description: Encrypted password to access domain SC
- platformsc_ip_address
-
Description: IP address of platform SC
- platformsc_access_userid
-
Description: User id to access platform SC
- platformsc_access_password
-
Description: Encrypted password to access platform SC
HP ILO Target Host Variables
The following list shows all component variables for the HP ILO target host. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
- installPath
-
Description: Physical host name for the target system
Example: sunfire-v60x-host
- target_host
-
Description: Virtual host name for the target system
Default value: :[installPath]-target
- description
-
Description: Optional description of the target
Example: test v60x
- ethernet_mac_address
-
Description: Mac address
Example: 00:0E:0C:07:E9:31
- ethernet_ip_address
-
Description: IP address
Example: 10.42.42.77
- ethernet_netmask
-
Description: Network mask
Default value: 255.255.255.0
- architecture
-
Description: Target architecture (for example, sun4u, x86)
Default value: x86
- kernel_arch
-
Description: Kernel architecture (sun4u, i86pc)
Default value: i86pc
- disk_size
-
Description: Size of disk
Default value: 20GB
- osp_control_service
-
Description: Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False)
Default value: TRUE
- sps_ra_parent
-
Description: Name of parent for RA
Default value: masterserver
- sps_ra_parent_type
-
Description: Whether RA parent is an MS or an LD
Default value: MS
- sps_ra_host
-
Description: Name or IP address of RA host
Default value: :[installPath]
- sps_ra_conn
-
Description: Type of RA connection (raw, ssl, ssh)
Default value: raw
- sps_ra_ssl_auth
-
Description: Whether RA has SSL authorization (y,n)
Default value: N
- sps_ra_port
-
Description: Port for RA
Default value: 1131
- sps_ra_adv_parms
-
Description: Advanced parameters for RA
- guid
-
Description: GUID of the target specified within {}
Note –The GUID must be in the form {dddddddd-dddd-dddd-dddd-dddddddddddd}, where d is a hexadecimal text digit.
Example: {3AE45192-159D-11D8-AEF3-001083FDFE8A}
- ilo_ip_address
-
Description: ILO IP address
Example: 10.5.133.135
- ilo_version
-
Description: ILO version
Default value: 1.6.4
- ilo_access_userid
-
Description: User id to access ILO
- ilo_access_password
-
Description: Encrypted password to access ILO
Other IPMI Target Host Variables
The following list shows all component variables for the other IPMI target host. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
- installPath
-
Description: Physical host name for the target system
Example: sunfire-v60x-host
- target_host
-
Description: Virtual host name for the target system
Default value: :[installPath]-target
- description
-
Description: Optional description of the target
Example: test v60x
- ethernet_mac_address
-
Description: Mac address
Example: 00:0E:0C:07:E9:31
- ethernet_ip_address
-
Description: IP address
Example: 10.42.42.77
- ethernet_netmask
-
Description: Network mask
Default value: 255.255.255.0
- architecture
-
Description: Target architecture (for example, sun4u, x86)
Default value: x86
- kernel_arch
-
Description: Kernel architecture (sun4u, i86pc)
Default value: i86pc
- disk_size
-
Description: Size of disk
Default value: 20GB
- osp_control_service
-
Description: Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False)
Default value: TRUE
- sps_ra_parent
-
Description: Name of parent for RA
Default value: masterserver
- sps_ra_parent_type
-
Description: Whether RA parent is an MS or an LD
Default value: MS
- sps_ra_host
-
Description: Name or IP address of RA host
Default value: :[installPath]
- sps_ra_conn
-
Description: Type of RA connection (raw, ssl, ssh)
Default value: raw
- sps_ra_ssl_auth
-
Description: Whether RA has SSL authorization (y,n)
Default value: N
- sps_ra_port
-
Description: Port for RA
Default value: 1131
- sps_ra_adv_parms
-
Description: Advanced parameters for RA
- guid
-
Description: GUID of the target specified within {}
Note –The GUID must be in the form {dddddddd-dddd-dddd-dddd-dddddddddddd}, where d is a hexadecimal text digit.
Example: {3AE45192-159D-11D8-AEF3-001083FDFE8A}
- disk_type
-
Description: Disk type (for example, SCSI, IDE)
Default value: scsi
- ipmi_ip_address
-
Description: IPMI IP address
Example: 10.5.133.135
- ipmi_access_userid
-
Description: User id to access IPMI
- ipmi_access_password
-
Description: Encrypted password to access IPMI
- ipmi_hal_jar
-
Description: Path to IPMI HAL JAR file
Default value: file://:[targetableComponent:installPath]/SUNWn1osp/drivers/sun/ipmi.jarf
- ipmi_version
-
Description: IPMI version
Default value: 1.5
- power_service_true_false
-
Description: Does the network management interface provide power on/off service?
Default value: true
- boot_service_true_false
-
Description: Does the network management interface provide boot service (disk, then network)?
Default value: false
- console_service_true_false
-
Description: Does the network management interface provide console service?
Default value: false
Other Remotely-Managed Target Host Variables
The following list shows all component variables for the other remotely-managed target host. The Other component type uses these variables. Use the Other type for remotely-managed targets that do not fit any of the other categories. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
Note –
The Other component type has a long list of variables, some of which will not apply to your specific hardware type. If a variable does not apply, leave it blank.
- installPath
-
Description: Physical host name for the target system
Example: sunfire-v60x-host
- target_host
-
Description: Virtual host name for the target system
Default value: :[installPath]-target
- description
-
Description: Optional description of the target
Example: test v60x
- ethernet_mac_address
-
Description: Mac address
Example: 00:0E:0C:07:E9:31
- ethernet_ip_address
-
Description: IP address
Example: 10.42.42.77
- ethernet_netmask
-
Description: Network mask
Default value: 255.255.255.0
- architecture
-
Description: Target architecture (for example, sun4u, x86)
Default value: x86
- kernel_arch
-
Description: Kernel architecture (sun4u, i86pc)it literal
Default value: i86pc
- disk_size
-
Description: Size of disk
Default value: 20GB
- osp_control_service
-
Description: Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False)
Default value: TRUE
- sps_ra_parent
-
Description: Name of parent for RA
Default value: masterserver
- sps_ra_parent_type
-
Description: Whether RA parent is an MS or an LD
Default value: MS
- sps_ra_host
-
Description: Name or IP address of RA host
Default value: :[ethernet_ip_address]
- sps_ra_conn
-
Description: Type of RA connection (raw, ssl, ssh)
Default value: RAW
- sps_ra_ssl_auth
-
Description: Whether RA has SSL authorization (y,n)
Default value: N
- sps_ra_port
-
Description: Port for RA
Default value: 1131
- sps_ra_adv_parms
-
Description: Advanced parameters for RA
- guid
-
Description: GUID of the target specified within {}
Note –The GUID must be in the form {dddddddd-dddd-dddd-dddd-dddddddddddd}, where d is a hexadecimal text digit.
Example: {3AE45192-159D-11D8-AEF3-001083FDFE8A}
- disk_type
-
Description: Disk type (for example, SCSI, IDE)
Default value: scsi
- netmgmt_type_1
-
Description: Network management interface type (ipmi/alom/lom)
- netmgmt_version_1
-
Description: Network management version
- netmgmt_hal_jar_1
-
Description: Path to network management HAL JAR file
Default value: file://:[targetableComponent:installPath]/SUNWn1osp/drivers/sun/ipmi.jar
- netmgmt_ip_address_1
-
Description: Network management IP address
- netmgmt_protocol_1
-
Description: Network management protocol (ipmi/telnet)
Default value: telnet
- netmgmt_port_1
-
Description: Network management port
- power_service_true_false_1
-
Description: Does the network management interface provide power on/off service?
Default value: true
- boot_service_true_false_1
-
Description: Does the network management interface provide boot service (disk, then network)?
Default value: true
- console_service_true_false_1
-
Description: Does the network management interface provide console service?
Default value: false
- netmgmt_userid_1
-
Description: User ID to access network management interface
- netmgmt_password_1
-
Description: Encrypted password to access network management interface
- terminal_server_type_1
-
Description: Terminal server type
Default value: Cisco2621
- terminal_server_version_1
-
Description: Terminal server version
- terminal_server_hal_jar_1
-
Description: Path to terminal server HAL JAR file
Default value: file://:[targetableComponent:installPath]/SUNWn1osp/drivers/cisco/c2621.jar
- terminal_server_ip_address_1
-
Description: IP address of terminal server connected to this system
Example: 10.5.133.135
- terminal_server_protocol_1
-
Description: Terminal server access protocol
Default value: telnet
- terminal_server_port_1
-
Description: Port of terminal server
- terminal_server_userid_1
-
Description: Terminal server user id
- terminal_server_password_1
-
Description: Encrypted password for terminal server
- netmgmt_type_2
-
Description: Network management interface type (ipmi/alom/lom)
Default value: ipmi
- netmgmt_version_2
-
Description: Network management version
- netmgmt_hal_jar_2
-
Description: Path to network management HAL JAR file
Default value: file://:[targetableComponent:installPath]/SUNWn1osp/drivers/sun/ipmi.jarf
- netmgmt_ip_address_2
-
Description: Network management IP address
- netmgmt_protocol_2
-
Description: Network management protocol (ipmi/telnet)
Default value: telnet
- netmgmt_port_2
-
Description: Network management port
- power_service_true_false_2
-
Description: Does the network management interface provide power on/off service?
Default value: false
- boot_service_true_false_2
-
Description: Does the network management interface provide boot service (disk, then network)?
Default value: false
- console_service_true_false_2
-
Description: Does the network management interface provide console service?
Default value: false
- netmgmt_userid_2
-
Description: User ID to access network management interface
- netmgmt_password_2
-
Description: Encrypted password to access network management interface
- terminal_server_type_2
-
Description: Terminal server type
Default value: Cisco2621
- terminal_server_version_2
-
Description: Terminal server version
- terminal_server_hal_jar_2
-
Description: Path to terminal server HAL JAR file
Default value: file://:[targetableComponent:installPath]/SUNWn1osp/drivers/cisco/c2621.jar
- terminal_server_ip_address_2
-
Description: IP address of terminal server connected to this system
Example: 10.5.133.135
- terminal_server_protocol_2
-
Description: Terminal server access protocol
- terminal_server_port_2
-
Description: Port of terminal server
- terminal_server_userid_2
-
Description: Terminal server user id
- terminal_server_password_2
-
Description: Encrypted password for terminal server
Generic Target Host Variables
The following list shows all component variables for the generic target host. The Target type uses these variables. Use the Target type for any host that does not match any of the other target host types. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
- installPath
-
Description: Physical host name for the target system
- target_host
-
Description: Virtual host name for the target system
Default value: :[installPath]-target
- description
-
Description: Optional description of the target
Example: test v60x
- ethernet_mac_address
-
Description: Mac address
Example: 00:0E:0C:07:E9:31
- ethernet_ip_address
-
Description: IP address
Example: 10.42.42.77
- ethernet_netmask
-
Description: Network mask
Default value: 255.255.255.0
- architecture
-
Description: Target architecture (for example, sun4u, x86)
Default value: sun4u
- kernel_arch
-
Description: Kernel architecture (sun4u, i86pc)
Default value: sun4u
- disk_size
-
Description: Size of disk
Default value: 20GB
- osp_control_service
-
Description: Whether to call the OSP Control Service, which automates power off, reboot, and power on functions
Default value: TRUE
- sps_ra_parent
-
Description: Name of parent for RA
Default value: masterserver
- sps_ra_parent_type
-
Description: Whether RA parent is an MS or an LD
Default value: MS
- sps_ra_host
-
Description: Name or IP address of RA host
Default value: :[ethernet_ip_address]
- sps_ra_conn
-
Description: Type of RA connection (raw, ssl, ssh)
Default value: raw
- sps_ra_ssl_auth
-
Description: Whether RA has SSL authorization (y,n)
Default value: N
- sps_ra_port
-
Description: Port for RA
Default value: 1131
- sps_ra_adv_parms
-
Description: Advanced parameters for RA
- guid
-
Description: GUID of the target specified within {}
Note –The GUID must be in the form {dddddddd-dddd-dddd-dddd-dddddddddddd}, where d is a hexadecimal text digit.
- © 2010, Oracle Corporation and/or its affiliates