Updates to the ILOM 3.0.6 Firmware

C H A P T E R 4

This chapter describes the new features and functionality that have been added to the Oracle ILOM 3.0.6 firmware release. Procedures to implement the new functionality are explained. Resolved issues and known issues are also described. In addition, references to the ILOM 3.0 documents in which the new features are described in detail are provided.

Topics in the chapter include:

New Features for ILOM 3.0.6

Resolved Issues as of ILOM 3.0.6

Known Issues as of ILOM 3.0.6

New Features for ILOM 3.0.6

The following table identifies new features available in the ILOM 3.0.6 release. References to the appropriate guides in the ILOM 3.0 Documentation Collection that describe the features are also provided.

Topics
Description	Refer To:
New storage monitoring properties for HDDs and RAID configurations	Oracle Integrated Lights Out Manager (ILOM) 3.0 Concepts Guide, Storage Monitoring and Zone Management Oracle Integrated Lights Out Manager (ILOM) 3.0 CLI Procedures Guide, Monitoring Storage Components and Zone Manager
Enhancements to power management	Oracle Integrated Lights Out Manager (ILOM) 3.0 Concepts Guide, Power Monitoring and Management of Hardware Interfaces Oracle Integrated Lights Out Manager (ILOM) 3.0 CLI Procedures Guide, Power Monitoring and Management of Hardware Interfaces Oracle Integrated Lights Out Manager (ILOM) 3.0 Web Interface Procedures Guide, Power Monitoring and Management of Hardware Interfaces
New root password warning message	Oracle Integrated Lights Out Manager (ILOM) 3.0 Concepts Guide, ILOM Overview
Updated list of network ports used by ILOM	Oracle Integrated Lights Out Manager (ILOM) 3.0 Concepts Guide, ILOM Network Configurations

Resolved Issues as of ILOM 3.0.6

This section describes the issues that have been resolved as of the ILOM 3.0.6. Specific change request (CR) identification numbers for these fixed issues are provided, where available.

Topics
Description	Links
Unexpected SMTP test email notification behavior	Inability to Send SMTP Test Alert Email Notification
Unexpected behavior drill-down behavior from CMM to blade	Inability to Navigate From CMM to Server Module After Disabling SSH
Unexpected power management event behavior	Power Management Events Are Not Recorded in Log File

Inability to Send SMTP Test Alert Email Notification

CR 6850298

Issue: After pressing Test (on SMTP page) the test email notification was not sent and there was no entry found in event log for this event.

Update: This issue has been resolved as of ILOM 3.0.6.

Inability to Navigate From CMM to Server Module After Disabling SSH

CR 6837359

Issue: After disabling SSH on a server module it was impossible to navigate to the server module from the CMM.

Update: This issue has been resolved as of ILOM 3.0.6.

Power Management Events Are Not Recorded in Log File

CR 6831492

Issue: Power management was not triggering an event after crossing a threshold.

Update: This issue has been resolved as of ILOM 3.0.6.

Known Issues as of ILOM 3.0.6

This section describes known issues and workarounds as of ILOM 3.0.6. Specific change request (CR) identification numbers and workarounds for these issues are provided, where available.

Topics
Description	Links
ILOM web interface known issues	Unable to Retrieve Host Power State After Upgrading ILOM Firmware From 2.0 to 3.0 Access Page Error Appears After Configuring Unknown Sensor LED Status When Monitoring System From IPMItool
ILOM web interface known issues
IPMI interface known issue	Access Page Error Appears After Configuring Unknown Sensor LED Status When Monitoring System From IPMItool
Back up and restore known issue	Console Error Appears After Performing Backup and Restore

Unable to Retrieve Host Power State After Upgrading ILOM Firmware From 2.0 to 3.0

CR 6858008

Issue: When the SP firmware is updated from ILOM 2.0 to 3.0, the ILOM web interface might not be able to retrieve the remote host power state after the upgrade completes. If this occurs, a blank page appears on the Remote Power Control tab.

Workaround: Perform one of the following actions:

Clear your browser cache and refresh your browser after completing the upgrade.

In the header area of the ILOM web page, click the Refresh button (on the ILOM web interface page) to correct the browser caching issue.

Access Page Error Appears After Configuring Unknown Sensor LED Status When Monitoring System From IPMItool

CR 6848980

Issue: Unknown sensor LED statuses are shown in the ILOM web interface when using IPMItool to monitor Oracle servers. This issue is likely to occur when concurrently running the SP and the IPMI KCS interface from the operating system (OS). As a result of this configuration, the IPMI messages are overloaded to the SP.

Workaround: To enable the ILOM web interface sufficient time to read the IPMI sensors, you should limit the rate of KCS message responses to the host OS by inserting the command sleep 1 between commands in your host IPMItool script.

Console Error Appears After Performing Backup and Restore

CR 6847309

Issue: The following console error message might appear after backing up and restoring the ILOM configuration.

bind (udp): Address already in use

Workaround: None. This is a benign error message.

Windows Server 2008 R2 Generates System Event Log Warning Messages When Power Is Being Limited by ILOM Power Management

CR 6881284

Issue: When power is being limited by the ILOM Power Management feature, the Windows Server 2008 R2 operating system will generate warning messages in the System Event Log informing the user that the processor(s) are being restricted. Example Event:

The Speed of Processor xx in group x is being limited by system firmware. The processor has been in this reduced performance state for xxxx seconds since last report.

Workaround. None needed. These are expected events and are not indicative of a problem.