C H A P T E R  9

Manage SPARC System Configuration Management Interfaces Using SNMP

Topics

 

Description

Links

Review the prerequisites

SPARC management interfaces



Related Topics

 

 

For ILOM

Section

Guide

  • Concepts
  • Remote Host Management Options

Oracle Integrated Lights Out Manager (ILOM) 3.0 Concepts Guide (820-6410)

  • Web
  • Managing Remote Hosts

Oracle Integrated Lights Out Manager (ILOM) 3.0 Web Interface Procedures Guide (820-6411)

  • CLI
  • Managing Remote Hosts

Oracle Integrated Lights Out Manager (ILOM) 3.0 CLI Procedures Guide (820-6412)

The ILOM 3.0 Documentation Collection is available at: http://docs.sun.com/app/docs/prod/int.lights.mgr30#hic



Before You Begin

Prior to performing the procedures in this chapter, you should ensure that the following requirements are met.



Note - The example SNMP commands presented in this section are based on the Net-SNMP sample applications and, therefore, will only work as presented if you have Net-SNMP and the Net-SNMP sample applications installed.



Configuring SPARC Management Interfaces


Topics

 

Description

Links

Review the prerequisites

SPARC management interfaces



procedure icon  View and Configure SPARC Diagnostic Settings



Note - You can use the get and set commands to view and configure SPARC diagnostic settings. For a description of the MIB objects used in these commands, see the SUN-ILOM-CONTROL-MIB.


1. Log in to a host that has an SNMP tool and the ILOM MIBs installed. For example, type:

ssh username@snmp_manager_ipaddress

Password: password

2. Refer to the following SNMP command examples:


procedure icon  View and Configure SPARC Host Settings



Note - You can use the get and set commands to view and configure SPARC host settings. For a description of the MIB objects used in these commands, see the SUN-ILOM-CONTROL-MIB.


1. Log in to a host that has an SNMP tool and the ILOM MIBs installed. For example, type:

ssh username@snmp_manager_ipaddress

Password: password

2. Refer to the following SNMP command examples:


procedure icon  View and Configure SPARC Boot Mode Settings



Note - You can use the get and set commands to view and configure SPARC boot mode settings. For a description of the MIB objects used in these commands, see the SUN-ILOM-CONTROL-MIB.


1. Log in to a host that has an SNMP tool and the ILOM MIBs installed. For example, type:

ssh username@snmp_manager_ipaddress

Password: password

2. Refer to the following SNMP command examples:


procedure icon  View and Configure SPARC Keyswitch Setting



Note - You can use the get and set commands to view and configure SPARC key switch settings. For a description of the MIB objects used in these commands, see the SUN-ILOM-CONTROL-MIB.


1. Log in to a host that has an SNMP tool and the ILOM MIBs installed. For example, type:

ssh username@snmp_manager_ipaddress

Password: password

2. Refer to the following SNMP command examples: