Sun Ultra 27 Workstation Installation Guide

Adding and Removing Boot Devices

The BIOS Setup Utility's Boot screen lists the known devices from which the workstation can boot. To boot from a newly installed or attached device, you must first access the BIOS Setup Utility and add the device to the boot list. You can also remove devices from the list or arrange the order of the devices to specify a boot priority.

Caution – Caution –

Incorrect BIOS settings can cause your workstation to malfunction. Be careful when making changes to the BIOS Setup Utility.

ProcedureTo Add and Remove Boot Devices

  1. Power on the workstation (see Powering the Workstation On and Off).

    The system boots.

  2. Press the F2 key during system boot.

    The BIOS Setup screen appears.

  3. Use the arrow keys to navigate to the Boot menu.

  4. In the Boot Settings menu, add or remove the device to or from the list of boot devices .

  5. If necessary, change the boot device priority by moving higher priority devices towards the top of the list.

  6. Press the F10 key to save your settings and exit.